AccuFocus
1 / 4ページ

カタログの抜粋

AccuFocus Laser Beam Delivery Components A Non-Contact Capacitive Height Sensing Solution For Maintaining Optical Focal Point Control For Laser Cutting Applications

カタログの1ページ目を開く

AccuFocus AccuFocus Operation AccuFocus operates as an independent, closed loop control system. The system maintains optical focal point control by sensing the capacitance between the gas jet tip (cutting tip) and the grounded conductive workpiece. This allows the tip to accurately follow the contours of the workpiece and cut as quickly and efficiently as possible. Available Configurations Modular construction allows a wide variety of AccuFocus systems to be assembled. Each AccuFocus head has a motor driven slide, a crash protection device (opt.), lens manifold block, gas jet manifold, tip...

カタログの2ページ目を開く

Cutting Heads A wide range of Cutting Heads are available to meet your needs and requirements. The heads are modular and can easily be set up in a variety of configurations. Each component can be disassembled for cleaning, adjustment or replacement. 250 different Adapter Rings are currently available to integrate into virtually any system configuration Z-Axis Motor Driven Slide with ± 10mm travel std. Neutral position is at the center of travel for equal extension and retraction. Features up/down limits and unique clutch drive permitting long life in hostile operating conditions...

カタログの3ページ目を開く

AccuFocus Specifications Specifications Crash Protector (CPD0033) ■ 11° Maximum Deflection ■ Normally Closed Circuit ■ Circuit Opens @ Approx. 1⁄2° Deflection ■ 3A 125VAC Switch Rating ■ 5 Meter Plug Cable Length Height Sensing Unit ■ ■ ■ ± 15V DC .4 AMP Input Power Analog ± 8V DC Linear Output 8" H x 6" W x 4" D TO HSUXXXX ADRXXXX CPDXXXX CABXXXX The “XXXX” represents a generic part number. Contact a Laser Mech Sales Engineer for assistance in configuring your system with exact part numbers. TTBXXXX TTWXXXX GJMXXXX TRAXXXX TRAXXXX .050 STAND-OFF 5.0" FOCAL LENGTH 4.995" MOUNT DISTANCE...

カタログの4ページ目を開く