
グループ: KEB
カタログの抜粋

COMBIVERT G6 HIGH PERFORMANCE INVERTER 0.75 ... 30 kW EN
カタログの1ページ目を開く
System overview High performance inverter Integrated flexibility with safety Properties / Functions - Control unit Properties / Functions - Power stage Data table - mechanics Data table - electrical Applications - maschine building and plant constructions COMBIVIS 6 - the tool for all tasks Decentralized high protection degree COMBILINE - accessories
カタログの2ページ目を開く
SYSTEM OVERVIEW Automation with Drive stands as a synonym for optimally selected combinations of control and automation solutions with the drive level at the end it is the key to successful machine concepts. Let the following pages inspire you with regards to the diversity and performance of the COMBIVERT G6 drive controller, and help you to find a solution that reliably meets your requirements. Cloud services Remote Control CLOUD ROUTER CONNECT ROUTER POWER REMOTE CONNECT REMOTE CONNECT Embedded Control Input AC 3PH 50/60 Hz 400V XXXXXX Output: AC3PH 0…U XXXXXXX XXXkVA / XXXX Mat.No....
カタログの3ページ目を開く
COMBIVERT G6 - HIGH PERFORMANCE INVERTER The COMBIVERT G6 series was designed as an solution which covers all important requirements for open loop three-phase drives within one device. Therefore a high degree of variability, supporting actual and future technologies, is prepared. The two level parameter structure with basic (customer parameters) and application menu (application parameters) gives COMBIVERT G6 a unique user friendly and easy handling high functionality. The integrated multi-language LCD plain text display eased the operator guidance. Equipped with new 32-bit...
カタログの4ページ目を開く
INTEGRATED FLEXIBILITY WITH SAFETY Conforming to the actual requirements of the European machine directive, the COMBIVERT G6 offers an integrated 2-channel safety function STO according to category 3, EN ISO 13849-1 PL e / IEC EN 62061, SIL 3. STO SafeSicherer Stop 1 Stop 1 Safe Speed Monitor (f = 0 Hz) Additionally the function SS1 can be covered together with an external safety timing relay. The drive is decelerated within a fixed time and is set to STO (stop category 1, EN 60204-1). COMBIVERT G6 - ON BOARD - EMC TECHNOLOGY All sizes are equipped with an internal EMC filter ready for the...
カタログの5ページ目を開く
PROPERTIES / FUNCTIONS - CONTROL UNIT DIGITAL INPUTS AND OUTPUTS • 8 Digital In • 2 Relays • 2 Digital Out • Pulse-Train (CAN) UNIVERSAL ANALOG INPUT / OUTPUTS • 2 Analog In, 0 ... ±10 V, 0 ... ±20 mA, 4 ... 20 mA • 2 Analog Out (0 ... ±10 V) (not available for EtherCAT) SAFETY FUNCTION • STO -function, 2-channel according category 3, EN ISO 13849-1 PL e, IEC EN 62061, SIL3 • Devices with EtherCAT - and IO-Link control fulfill optional, the TÜV-certified function SSM with level 0 Hz CONTROL UNIT • internal and external 24 V DC supply RS 232/485-interface, open protocol KEB DIN 66019-II...
カタログの6ページ目を開く
PROPERTIES / FUNCTIONS - POWER STAGE POWER STAGE • 1 ph. 200 ... 240 V AC, 3-ph. • 380 ... 480 V AC, +10/-20%, 50/60 Hz and DC-input • EMC according to class C1 and C2 with integrated filter Internal braking transistor (GTR7) INTEGRATED EMC SOLUTION built with new innovative core materials and configured • according to EN61800-3 for environments C1 and C2 sized for motor cables, up to 100 m - C2 / 50 m - C1 • for especially low leakage currents of the filter component towards the ground and installation-safe due to consistently separated mains and motor connection side. FULLY DIMENSIONED •...
カタログの7ページ目を開く
DATA TABLE - MECHANICS W COMBIVERT G6 housing E - Flat Rear Available in 4 different mechanical sizes, COMBIVERT G6 are covering the power range from 0.75 kW to 30 kW designed for cabinet or machine frame installation. Devices with Flat Rear and the push-through mounting are size depending variations to optimize the heat transfer. INSTALLATION SIZE Ventilated convection Flat Rear* heat transfer External heat/push-through Mounting Weight
カタログの8ページ目を開く
DATA TABLE - ELECTRICAL 230 V Size Mains phases Mains frequency Housing size Output power rating Max. motor power rating Max. short-time limit current (60 sec.) OC-release current Output rated current * Input rated current Max. admissible mains fuse (gG) Rated switching frequency Power loss at nominal operation approx. Input voltage range Uin Network configurations Output voltage Output frequency Max. Motor cable length (screened EN 61800-3) Limit class C1 (low-capacity/standard line) Limit class C2 (low-capacity/standard line) Protection type Operating temperature Storage temperature...
カタログの9ページ目を開く
APPLICATIONS MASCHINE BUILDING AND PLANT CONSTRUCTIONS FOOD PRODUCTION • High breakaway torque during start-up • Exact torque during process • Protective coating PACKAGING TECHNOLOGY • Fast set value processing with ±10 V • Controlled positioning compensates dead times CONVEYOR AND STORAGE TECHNOLOGY • Long motor lines up to 100 m • Robust mechanics CRANES, LIFTING DEVICES • High dynamics during acceleration • Internal braking transistor COMPRESSORS • Output frequency up to 599 (800) Hz • PID controllers for process control ELEVATORS • High starting torque • Consistent torque with change of...
カタログの10ページ目を開く
IN ADDITION, COMBIVERT G6 CAN ALSO BE ADAPTED TO CUSTOMER-SPECIFIC APPLICATIONS • • The existing platform has been prepared for additional variations, e.g. - special fieldbus protocols, - operation of special motors or - the expansion of software functions
カタログの11ページ目を開く
COMBIVIS 6 - THE TOOL FOR ALL TASKS COMBIVIS 6 • • • • • • Free and easy-to-use software for startup, administration and analysis Integrated start-up assistants (Wizards) for quick and easy configuration Direct access to device documentation 16 channel oscilloscope for extensive analysis Online parameter list comparison Parameterization of key safety indicators and functions COMBIVIS studio 6–THE ENGINEERING TOOL FOR AUTOMATION SOLUTIONS The intelligent automation suite from KEB combines an assistant-guided component selection, fieldbus configuration, drive parameterization, IEC 61131-3...
カタログの12ページ目を開くKEB Automation KGのすべてのカタログと技術パンフレット
-
SERVO MOTORS TA
24 ページ
-
COMBIVERT P6
16 ページ
-
COMBIVERT T6
4 ページ
-
C6 COMPACT 3
4 ページ
-
CONTROL AND AUTOMATION
264 ページ
-
SOLUTION SERVO PUMP
8 ページ
-
CNC SOLUTIONS
6 ページ
-
EMC COMBILINE
32 ページ
-
DL3 Servo Motors
16 ページ
-
COMBIVERT R6
8 ページ
-
SYSTEM FOR SAFETY
12 ページ
-
BRAKES & CLUTCHES
40 ページ
-
PORTFOLIO
8 ページ
-
COMBIVERT S6
24 ページ
-
COMBIVERT F6
18 ページ