カタログ >
Kaeser Compressors >
SmartPipe+TM

SmartPipe+TM
1 / 28ページ

カタログの抜粋

SmartPipe+™ Product Catalog ¾” to 2½”

SmartPipe+™ Compressed Air Piping Kaeser’s SmartPipe+ is a modular compressed air distribution system that offers both lower installation costs and lower long term operating costs. Piping selection directly affects the three key elements of every compressed air system: flow, pressure, and air quality. Poor choices in pipe materials, diameter, and layout cause flow restrictions, often resulting in significant pressure drop. Pressure drop is the main cause of increased energy consumption and underperforming air driven tools and equipment. Choices in piping also directly impact installation...

カタログの2ページ目を開く

• Normal working pressure and temperature: 232 psi, -20°F to ±200°F • Storage temperature: -40°F to +212°F • Max vacuum: 98.3% (29.5” Hg) • Consult factory for higher pressures or temperatures Aluminum Pipe Specification • 6063-T5 aluminum grade • Extruded pipe conforms to standards EN755.2 and EN755.8 • Smooth bore ID for optimal flow rate performance • Powder coat in BLUE (RAL5012) with QUALICOAT CERTIFIED lacquer finish exterior • Consult factory for availability of other colors Flexible Hose Specification • Resistant to mineral and synthetic oils • Maximum working pressure for flexible...

カタログの4ページ目を開く

• SmartPipe+ meets the requirement of ASME B31.1 which stipulates the minimum requirements for the design, materials, fabrication, installation, test, and inspection of power and auxiliary piping systems for industrial plants. • SmartPipe+ also conforms to European standard 2014/68/EU regarding equipment under pressure. • Kaeser warrants its SmartPipe+ products to be free of defects in material and workmanship for a period of ten (10) years from the date of purchase of the products. • QUALICOAT certification is a guarantee of the quality of the lacquer finish applied to the SmartPipe+...

カタログの5ページ目を開く

Sizing Select the SmartPipe+ diameter for your application based on required flow and pressure drop Pressure Loss Chart Pipe size recommended based on 100 psi and less than 5.5 psi pressure drop Branch or Linear Distribution Network Equivalent Length (feet) Flow (cfm) Note: For flows above the range shown, see 76-168 mm SmartPipe. Looped Distribution Network Equivalent Length (feet) Flow (cfm) 10 25 50 75 Note: For flows above the range shown, see 76-168 mm SmartPipe. 6

カタログの6ページ目を開く

Example An application requires a Kaeser BSD 50 @ 110 psi with the appropriate air treatment. The application process cannot tolerate a pressure drop of more than 5.5 psi in the main header when the main distribution header pressure is 100 psi. Note: the main distribution header is looped. Kaeser BSD 50 @ 110 psi = 232 cfm (FAD) Main distribution pipe length (including equivalent length for all fittings) = 1000 ft. Main header pressure = 100 psi For a looped distribution network, use 50 mm diameter pipe. If the distribution network is a branch or linear, use 63 mm diameter pipe. Note: 1) To...

カタログの7ページ目を開く

Equal Union Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの8ページ目を開く

Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの9ページ目を開く

Equal 90° Elbow Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの10ページ目を開く

Equal 45° Elbow Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの11ページ目を開く

Fixing Clips Part No.

カタログの12ページ目を開く

For 20 and 25 mm fixing clips only to put on the same center line as 40, 50, and 63 mm clips. Threaded Rod Adapter Part No. For use with fixing clips. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの13ページ目を開く

Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの14ページ目を開く

Accessories Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの15ページ目を開く

Ball Valve (Pipe to Thread) Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの16ページ目を開く

45° Wall Bracket with Ball Valve Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの17ページ目を開く

Hose (Pipe to Pipe) Anti-whiplash Strap Lockable Handle Part No. Prevents whiplash should SmartPipe+ flexible hose be disconnected while under pressure. Conforms to ISO 4414 safety standard. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの18ページ目を開く

ANK0040, 20 mm - 63 mm (3/4” to 21A”) Pipe Cutter, uses replacement blades ANK0240. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの20ページ目を開く

Deburrer / Reamer / Chamfer Tools Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの21ページ目を開く

Pressure Loss in Couplers SmartPipe couplers are designed for easy one-handed connection and disconnection. To connect, simply press the plug into the coupler port. To disconnect, twist the coupler sleeve once to the left to vent pressure, then once to the right to release the plug. These couplers comply with ISO 4414 and EN 983 safety standards. ISO B 1/4 BodyMale NPT Male Plug NPT Product Photo Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの22ページ目を開く

Male Plug NPT Product Photo ARO 1/4 BodyMale NPT Male Plug NPT Part No. Dimensions in inches (in.) and weight in pounds (lbs.) unless otherwise noted. Specifications subject to change without notice.

カタログの23ページ目を開く

Warranty SmartPipe+™ 3/4” to 2-1/2” Model: _____________________Serial No: ______________________Start-up Date: _________________ Kaeser Compressors, Inc. herein referred to as “Kaeser,” warrants the Kaeser SmartPipe+™ delivered hereunder will be free of defects in material and workmanship for a period of ten (10) years from the date of purchase of the products. Kaeser does not warranty the design, assembly or installation of the system, but only the components as stated herein. Kaeser is not responsible for improper design, assembly or installation, or for any modifications of the Kaeser...

カタログの24ページ目を開く