カタログ >
JCB >
SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS
1 / 8ページ

カタログの抜粋

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 1

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS RATED OPERATING CAPACITY: 135 1,350 lb (612 kg) 155 1,550 lb (703 kg) 175 1,750 lb (794 kg) 190 1,900 lb (862 kg) 205 2,050 lb (930 kg) I O * Illustration represents vertical lift machine. Specs in charts reflect changes in machines due to lift path. Machine Models Bucket Width - Optional Width Over Tyres - Optional Rated Operating Capacity Bucket Capacity - Standard H Reach @ Ground Level (cutting edge) Max Reach @ Full Height O Width Over Tyres - Standard G Height to Hinge Pin Fully Raised I M Dump Angle N Bucket Width - Standard Machine Models Turning Radius Bucket Corner Radius Quickhitch Radius K Dig Depth (toe plate horizontal) Clearance Rear Chassis Radius J Reach @ Full Height - Fully Dumped P Ground Clearance Lift Path

カタログの1ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 2

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS RATED OPERATING CAPACITY: C O * Illustration represents vertical lift machine. Specs in charts reflect changes in machines due to lift path. Machine Models Machine Models N Bucket Width - Standard Bucket Width - Optional O Width Over Tracks - Standard G Height to Hinge Pin Fully Raised Width Over Tracks - Optional Rated Operating Capacity Bucket Capacity - Standard Turning Radius H Reach @ Ground Level Bucket Corner Radius Quickhitch Radius Rear Chassis Radius Lift Path Max Reach @ Full Height J Reach @ Full Height - Fully Dumped Ground...

カタログの2ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 3

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS HYDRAULICS In addition to the main hydrostatic drive pumps, there is a dedicated loader and attachments supply pump (auxiliary hydraulics circuit standard on all base models). High flow is optional on all models except the 135. Pump Flow: 18.5 gpm (70 lpm) @ 2800 rpm engine speed Main relief pressure 3335 psi (230 bar) HYD HP Low Flow (36.0)* *calculated HYD HP High Flow (51.4)* Low lever efforts give excellent and easy control of transmission loader and attachments. Auxiliary hydraulics are actuated via the right hand controller giving...

カタログの3ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 4

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS SMALL PLATFORM 135 155/175/190/205/150T/190T/205T Model Perkins 404D-22 Perkins 404D-22T Displacement in3 (cm3) 134 (2200) 134 (2200) Fuel Diesel Diesel Cooling Liquid Liquid Aspiration Naturally Aspirated Turbo Gross Power @ 2800 rpm SAE J1995 hp (kW) 47.9 (35.7) 59.9 (44.7) Gross Torque @ 1200 rpm SAE J1995 lb/ft (Nm) 105 (143) 139 (189) Starter Motor hp (kW) 2.72 (2) 2.72 (2) Battery V/Ah 12/109 12/101 Alternator amps 65 85 Emission Certification EPA-T4i (EU St3B) EPA-T4i (EU St3B) Engine Oil Service Interval Hours 500 500 Variable Speed...

カタログの4ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 5

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS OPTIONAL EQUIPMENT - ALL MODELS STANDARD EQUIPMENT - ALL MODELS Isolation mounted canopy. ROPS and FOPS. Full audible and visual warning systems. Restraint activated safety system. Loader arm safety strut. Centrifugal dry type engine air filter with safety element. Mechanical quickhitch. Electronic hand throttle. Two front and one rear worklight. Emergency lower valve. Fuel gauge. Hydraulic park brake. Standard Flow auxliary hydraulics. Three way joysticks. Rear service access door. Tilting screen guard. Tilting cab. Mechanical suspension...

カタログの5ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 6

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS Planetary drive augers are built with fabricated boring heads using 1/2” thick plates with 5/8” carriage bolts and nuts. Bale Spikes Utilised for picking up and carrying round bales of hay. JCB hammers are among the most efficient available and are perfectly matched to JCB equipment. Brooms, Sweeper Collector For general sweeping duties around the job site. Brooms, Angle JCB angle brooms cover many applications including site clean-up, landscape and ground maintenance, road work, and repair. Brush Cutters For removal of brush and small trees...

カタログの6ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 7

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS Forks, Manure Provides excellent visibility while moving loose hay and manure. Forestry Cutting Heads Low profile with patent pending roter design, rotor operates at 2000 rpm. Grapples, Brush Heavy-duty unit with open bottom and sides which allows machine to carry objects longer than unit width. Grapples, Scrap Heavy-duty unit with twin ram grapple and ram guard protection. Rakes, Auto JCB auto rake is used to groom and finish soil for sod or seed. Rakes, Landscape Power JCB landscape rakes are excellent tools for cleaning up debris,...

カタログの7ページ目を開く

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS - 8

SMALL PLATFORM SKID STEER & COMPACT TRACK LOADERS A GLOBAL COMMITMENT TO QUALITY A GLOBAL COMMITMENT TO QUALITY JCB’s total commitment to its products and customers has helped it grow from a one-man business into Britain’s largest privately owned manufacturer of backhoe loaders, crawler excavators, wheeled excavators, telescopic handlers, wheeled loaders, dump trucks, rough terrain fork lifts, industrial fork lifts, mini/midi excavators, skid steer loaders, tractors and compaction equipment. By making constant and massive investments in the latest production technology, the JCB factories...

カタログの8ページ目を開く