1. カタログ >
  2. ISCAR Tools/イスカル >
  3. FF SOF - A New Economical Solution for High Feed Milling Applications

FF SOF - A New Economical Solution for High Feed Milling Applications
1 / 3ページ

{{requestButtons}}

カタログの抜粋

FF SOF - A New Economical Solution for High Feed Milling Applications - 1

MILLING MARCH 2012 METRIC 2012 Page 1 / 3 Page 1/7 New Product Announcement FF SOF - A New Economical Solution for High Feed Milling Applications

カタログの1ページ目を開く
FF SOF - A New Economical Solution for High Feed Milling Applications - 2

MILLING MARCH 2012 Page 2 / 3 METRIC 2012 New Product Announcement Highlights ISCAR is expanding the versatile HELIDO family of milling tools by introducing the FF SOF cutters, designed for high feed milling (HFM) operations. The new cutters feature a nominal cutting edge angle of 15º and can carry the following standard double-sided inserts: • S845 SNMU/SNHU 13… square inserts with 8 cutting edges • ONMU/ONHU 05… octagonal inserts with 16 cutting edges They combine the advantages of the high-performance design of the FEEDMILL tools with the effectiveness of the double-sided square and...

カタログの2ページ目を開く

ISCAR Tools/イスカルのすべてのカタログと技術パンフレット

  1. MILLING
    MILLING

    11 ページ

  2. THREADING
    THREADING

    5 ページ

  3. Parting&Grooving
    Parting&Grooving

    5 ページ

  4. PARTING, GROOVE-TURN, THREADING, TOOLING
    PARTING, GROOVE-TURN, THREADING, TOOLING

    24 ページ

  5. ITSBORE
    ITSBORE

    6 ページ

  6. SWISS-CUT
    SWISS-CUT

    9 ページ

  7. CUT-GRIP
    CUT-GRIP

    7 ページ

  8. X-STREAM SHRINKIN
    X-STREAM SHRINKIN

    7 ページ

  9. Non-Rotating Tool Lines
    Non-Rotating Tool Lines

    628 ページ

  10. Complete Machining Solutions Non-Rotating Tool Lines
    Complete Machining Solutions Non-Rotating Tool Lines

    628 ページ

  11. Engineered for MAXIMUM Precision Grooving and Threading
    Engineered for MAXIMUM Precision Grooving and Threading

    40 ページ

  12. Flashline eco line
    Flashline eco line

    80 ページ

  13. New products catalog
    New products catalog

    304 ページ

  14. Railway industry_2017
    Railway industry_2017

    38 ページ

  15. Welcome to ISCAR world
    Welcome to ISCAR world

    64 ページ

  16. Industrealize Industries
    Industrealize Industries

    92 ページ

  17. Machining Solutions for Down the Hole Rock Bits
    Machining Solutions for Down the Hole Rock Bits

    8 ページ

  18. TANG-GRIP IQ
    TANG-GRIP IQ

    40 ページ

  19. FLASHTURN
    FLASHTURN

    28 ページ

  20. DO-CUT. Deeper Cheaper Cut
    DO-CUT. Deeper Cheaper Cut

    4 ページ

  21. CFRP Machining
    CFRP Machining

    4 ページ

  22. Maximum Economical Turning Performance
    Maximum Economical Turning Performance

    318 ページ

  23. ISCAR INdustry
    ISCAR INdustry

    24 ページ

  24. catalog 2015
    catalog 2015

    324 ページ

  25. Quick Change High Precision Tools and Holders
    Quick Change High Precision Tools and Holders

    148 ページ

  26. MULTI-MASTER milling tool
    MULTI-MASTER milling tool

    28 ページ

  27. chamfering drill brochure
    chamfering drill brochure

    12 ページ

  28. FACE GROOVE-TURN TOOLS
    FACE GROOVE-TURN TOOLS

    128 ページ

  29. Solid Carbide Chamfering tool
    Solid Carbide Chamfering tool

    12 ページ

  30. Solutions for the bearing industries
    Solutions for the bearing industries

    36 ページ

  31. Solutions for the Dies and Molds industries
    Solutions for the Dies and Molds industries

    32 ページ

  32. Solutions for the automotive industries
    Solutions for the automotive industries

    36 ページ

  33. Solution for the aerospace industries
    Solution for the aerospace industries

    32 ページ

  34. Solutions for machine tool builders
    Solutions for machine tool builders

    16 ページ

  35. Solution for the medical industries
    Solution for the medical industries

    10 ページ

  36. Solution for the miniature parts industries
    Solution for the miniature parts industries

    20 ページ

  37. JET HP Line
    JET HP Line

    60 ページ

  38. Composite materials
    Composite materials

    12 ページ

  39. Heat Exchanger
    Heat Exchanger

    28 ページ

  40. Wind power industry
    Wind power industry

    44 ページ

  41. Power generation
    Power generation

    1 ページ

  42. MULTI-MASTER brochure
    MULTI-MASTER brochure

    28 ページ

  43. Solid Carbide & MULTI-MASTER Endmills
    Solid Carbide & MULTI-MASTER Endmills

    185 ページ

  44. Milling systems
    Milling systems

    593 ページ

  45. Hole Making Tools
    Hole Making Tools

    449 ページ

  46. New Cost Saving Double-Sided Parting Inserts
    New Cost Saving Double-Sided Parting Inserts

    5 ページ

  47. New HD Chipbreaker for Drilling Low Carbon Steel
    New HD Chipbreaker for Drilling Low Carbon Steel

    6 ページ

  48. New TIGER-IQ Heavy Duty Grooving Tools and Inserts
    New TIGER-IQ Heavy Duty Grooving Tools and Inserts

    7 ページ

  49. Highly Rigid Profiling Tools for Accurate Contours
    Highly Rigid Profiling Tools for Accurate Contours

    8 ページ

  50. Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools
    Expansion of the TANG-GRIP Line with 1.6 mm Inserts and Tools

    9 ページ

  51. MFHR-JHP Square Shank Face Grooving Tools
    MFHR-JHP Square Shank Face Grooving Tools

    3 ページ

  52. FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges
    FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges

    5 ページ

  53. Another Expansion of the MULTI-MASTER Product Range
    Another Expansion of the MULTI-MASTER Product Range

    9 ページ

  54. Expansion of the HELIIQMILL 390 Line with Tools Carrying 07 mm Edged Inserts
    Expansion of the HELIIQMILL 390 Line with Tools Carrying 07 mm Edged Inserts

    9 ページ

  55. YNMG A New 25º Rhombic Negative Insert
    YNMG A New 25º Rhombic Negative Insert

    9 ページ

  56. Expanding the Family with JHP SWISSTURN Toolholders
    Expanding the Family with JHP SWISSTURN Toolholders

    10 ページ

  57. Flat Top Economical Blades with 4 Pockets and Shank Tools with 2 Pockets
    Flat Top Economical Blades with 4 Pockets and Shank Tools with 2 Pockets

    6 ページ

  58. New P and M Chipformers for TNF Face Grooving Inserts
    New P and M Chipformers for TNF Face Grooving Inserts

    6 ページ

  59. TANG-GRIP and DO-GRIP
    TANG-GRIP and DO-GRIP

    11 ページ

  60. New Profile Milling Heads with MULTI-MASTER T15 Adaptation
    New Profile Milling Heads with MULTI-MASTER T15 Adaptation

    11 ページ

  61. CHATTERFREE and Chip Splitting
    CHATTERFREE and Chip Splitting

    3 ページ

  62. SD-SP15 New T-Slot Cutters with a Unique Spline Connection
    SD-SP15 New T-Slot Cutters with a Unique Spline Connection

    6 ページ

  63. ECI-H4/5R-CF Variable Helix and CHATTERFREE Endmills
    ECI-H4/5R-CF Variable Helix and CHATTERFREE Endmills

    6 ページ

  64. MULTI-MASTER INDEXABLE
    MULTI-MASTER INDEXABLE

    28 ページ

  65. Expansion of the MILLSHRED Family
    Expansion of the MILLSHRED Family

    9 ページ

  66. TANG-GRIP
    TANG-GRIP

    40 ページ

  67. FLASH-TURN
    FLASH-TURN

    28 ページ

  68. Chamfering Drills Brochure
    Chamfering Drills Brochure

    12 ページ

  69. IQ New Products
    IQ New Products

    184 ページ

  70. GrooveTurn
    GrooveTurn

    372 ページ

カタログアーカイブ

  1. COMBICHAM_2018
    COMBICHAM_2018

    5 ページ

  2. TOOLHOLDING SYSTEMS
    TOOLHOLDING SYSTEMS

    318 ページ

  3. TURNING & THREADING TOOLS
    TURNING & THREADING TOOLS

    466 ページ

  4. Combicham
    Combicham

    4 ページ

  5. Railway Industry
    Railway Industry

    12 ページ

  6. Toolholding Systems_2012
    Toolholding Systems_2012

    337 ページ

  7. Turning & Threading Tools_2012
    Turning & Threading Tools_2012

    465 ページ

  8. A New Rough Milling Insert for E90CN Tools
    A New Rough Milling Insert for E90CN Tools

    5 ページ

  9. A New Family of Face Mills for a Wide Range of Applications
    A New Family of Face Mills for a Wide Range of Applications

    8 ページ

  10. Expansion of HELIDO H490 Extended Flute Cutters
    Expansion of HELIDO H490 Extended Flute Cutters

    11 ページ

  11. HELIDO H490 75° Face Mill
    HELIDO H490 75° Face Mill

    3 ページ

  12. SUMOMILL T290 Extended Flute Shell Mill Cutter
    SUMOMILL T290 Extended Flute Shell Mill Cutter

    4 ページ

  13. Expansion of the HELI2000 Family
    Expansion of the HELI2000 Family

    7 ページ

  14. HELITANG T490 Inserts for Ramping Down Applications
    HELITANG T490 Inserts for Ramping Down Applications

    3 ページ

  15. Expansion of HELITANG T490 Extended Flute Cutters
    Expansion of HELITANG T490 Extended Flute Cutters

    14 ページ

  16. A New Combination of FEEDMILL for HELIDO H490-09 Insert
    A New Combination of FEEDMILL for HELIDO H490-09 Insert

    3 ページ

  17. Expansion of the MINI-TANGSLOT Cutter Family
    Expansion of the MINI-TANGSLOT Cutter Family

    11 ページ

  18. New HELITANG T490 Chip Splitting Inserts
    New HELITANG T490 Chip Splitting Inserts

    4 ページ

  19. Expansion of the HELIDO H490-17 Family
    Expansion of the HELIDO H490-17 Family

    3 ページ

  20. EC-H5M-CFR Variable 5 Helix and CHATTERFREE Endmills
    EC-H5M-CFR Variable 5 Helix and CHATTERFREE Endmills

    4 ページ

  21. Expansion of the MILLTHREAD Line
    Expansion of the MILLTHREAD Line

    10 ページ

  22. HeliFace Tools
    HeliFace Tools

    1 ページ

  23. ISCAR WG for High-Feed Finishing • • • • -GN -WG -GN -WG GN WG
    ISCAR WG for High-Feed Finishing • • • • -GN -WG -GN -WG GN WG

    2 ページ

  24. ISCAR Drilling Equipment, Drill Types and Diameter Ranges
    ISCAR Drilling Equipment, Drill Types and Diameter Ranges

    15 ページ

  25. HM90 E90A-D-M HM90 E90AD-D-M
    HM90 E90A-D-M HM90 E90AD-D-M

    1 ページ

  26. HM90 E90A Long-Reach EndMills Diameter Range .38-1.50 HM90 E90A-XL
    HM90 E90A Long-Reach EndMills Diameter Range .38-1.50 HM90 E90A-XL

    2 ページ

  27. PICCO Solid Carbide Mini Boring Bars • Inch
    PICCO Solid Carbide Mini Boring Bars • Inch

    3 ページ

  28. PICCO Solid Carbide Mini Boring Bars Metric
    PICCO Solid Carbide Mini Boring Bars Metric

    3 ページ

  29. ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT
    ISCAR Positive 7 Inserts for Aluminum Machining AS Chipformer SCGT

    1 ページ

  30. DCM INDEXABLE HEAD DRILLS DCM
    DCM INDEXABLE HEAD DRILLS DCM

    4 ページ

  31. HELIFACE Precision Machining Basic applications with various tools
    HELIFACE Precision Machining Basic applications with various tools

    1 ページ

*価格には税、配送費、関税また設置・作動のオプションに関する全ての追加費用は含まれておりません。表示価格は、国、原材料のレート、為替相場により変動することがあります。
© 2025 All rights reserved - サイトポリシー - 個人情報保護方針 - 利用規約 - クッキーの管理 - 鄂ICP备16017613号-2 -