カタログ >
ISCAR Tools/イスカル >
FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges

FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges
1 / 5ページ

カタログの抜粋

FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges

Highlights FDN-XN13 is a new family of full slot milling cutters with square inserts that provide an effective and economical solution for machining slots and grooves. ISCAR’s new FDN-XN13 cutters carry XNMU 130608PNM-MM patent pending configuration inserts. XNMU 130608PNM-MM is a robust double-sided square insert, featuring 8 (4 right-hand, and 4 left-hand) helical cutting edges and unique twisted upper and bottom surfaces. The inserts, when clamped on the cutter, produce staggered teeth with alternating axial rakes, which contribute to very stable cutting even under high chip load. The...

カタログの2ページ目を開く

FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges - 3

Cutting data • Cutting speed – refer to ISCAR recommendations for carbide grades • Feed per tooth varies from 0.08 to 0.25 mm/tooth depending on workpiece material, operation stability and radial depth of cut. Generally, the starting values should be set within a 0.1-0.15 mm/tooth range, and be adjusted in accordance with the results.

カタログの3ページ目を開く

FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges - 4

Full Slot, Flange-Type Slotting Cutters

カタログの4ページ目を開く

FDN-XN13 Efficient Full Slot Milling Cutters Carrying Square Inserts with 8 Cutting Edges - 5

Square Inserts with 4 Right- and 4 Left-Hand Cutting Edges, for Slotting Cutters Designation XNMU 130608PNN-MM XNMU 130608PNTN Recommended Machining Data

カタログの5ページ目を開く