カタログ >
ISCAR Tools/イスカル >
A New Combination of FEEDMILL for HELIDO H490-09 Insert

A New Combination of FEEDMILL for HELIDO H490-09 Insert
1 / 3ページ

カタログの抜粋

A New Combination of FEEDMILL for HELIDO H490-09 Insert - 1

MILLING FEBRUARY 2012 METRIC 2012 Page 1 / 3 Page 1/7 New Product Announcement A New Combination of FEEDMILL for HELIDO H490-09 Insert

カタログの1ページ目を開く

A New Combination of FEEDMILL for HELIDO H490-09 Insert - 2

MILLING FEBRUARY 2012 Page 2 / 3 METRIC 2012 New Product Announcement Highlights H490 ANKX 0904R12T-FF - insert for rough milling at extremely high feed rates ISCAR continues to expand the H490 ANKX 0904... insert options, by adding the H490 ANKX 0904R12T-FF - a FEEDMILL double-sided insert with four cutting edges that provides a very cost effective solution, thus expanding the application range of the HELIDO H490-09 family. The new H490 ANKX 0904R12T-FF is a double-sided insert, very rigidly clamped into a dovetail pocket. It has four cutting edges which were designed for rough milling at...

カタログの2ページ目を開く

A New Combination of FEEDMILL for HELIDO H490-09 Insert - 3

MILLING FEBRUARY 2012 Page 3 / 3 2012 METRIC New Product Announcement H490 ANKX 0904-FF Double-Sided Rectangular Inserts with 4 Helical Cutting Edges, for Very High Feed Milling at Small Depth of Cut r r1 3°30’ Rd° l F W ap max S Recommended Machining Data Designation H490 ANKX 0904R12T-FF W F ap max(1) l S r(2) r1 IC830 Dimensions (mm) 6.20 2.30 1.00 8.50 4.30 1.00 5.00 l 0.50-1.00 ap fz (mm/t) 0.50-1.50 • The cutting diameter of the tool is 0.12 mm larger than the nominal diameter when using this insert. • At D.O.C. larger than apmax, regular insert feed should be applied. (1) The ap...

カタログの3ページ目を開く