E3FA Series
1 / 2ページ

カタログの抜粋

INSTRUCTION MANUAL ! WARNING Thank you for selecting IMS product.This sheet primarily describes precautions required in installing and operating the product.Before operating the product,read the sheet thoroughly to acquire sufficient knowledge of the product.For your convenience,keep the sheet at your disposal. Failure to follow these instructions may result in serious injury or death: Fail-safe device must be installed when using the unit with machinery that may cause serious injury or substantial economic loss. (e.g. nuclear power control, medical equipment, ships, vehicles, railways, aircraft, combustion apparatus, safety equipment, crime/disaster prevention devices,etc.) Failure to follow these instructions may result in product damage: Do not use this unit over rated voltage; Do not use this unit where there is flammable or explosive gas; Do not use this unit where there is vibration or impact; In cleaning the unit, do not use water or an oil-based detergent. • High performance ASIC based advance sensor • Long product life time, 5us modulated pulse with 1/10 duty cycle reduced aging of LED • Build in 100ms power on delay, self-recover short circuit protection, reverse polarity, over voltage protection • Excellent noise immunity to DC light with modulated light source and CDS signal process technology • Mode selection for light on and dark on • Visible super bright red light for easy alignment • Distance adjustable using potentiometer C ■( Light source code) Connection type Response time_ Sensing method □ Operating timing diagram Receiver operation Received light Interrupted light “ Received light Interrupted light— Operation indicator (orange ) Operation mode Operatior level ^ The waveforms of”Operation indicator”and” Transistor output”are for Light on mode.

カタログの1ページ目を開く

Control output circuit diagram Fixing bracket（sold separately） NPN open collector output （Brown）+V Stability （green） Main circuit Operation （orange） Over current protection Load (Black) output Max.100mA 10-30VDC （Blue）0V （White） Dark ON control Light ON PNP open collector output （Brown）+V Operation （orange） Over current protection Main circuit Stability （green）（Blue）0V （White） Dark ON control Light ON Installation and sensitivity adjustment Dimensions Sensor Mounting hole dimension Sensitivity adjuster Operation indicator （orange） Stability indicator （green） Vinyl insulated round cord 4...

カタログの2ページ目を開く

E3FA Series 1 / 2ページ

カタログの抜粋

Intellisense Microelectronicsのすべてのカタログと技術パンフレット

E3FA Series
1 / 2ページ