E-Stop Switches
1 / 16ページ

Think Automation and beyond...

Emergency Stop Switches in the World! Your safety is our top priority IDEC Emergency Stop switches make life easier by giving you the power to shutdown a machine, system or process instantly! Prevent or avoid risks to people or machines and give yourself one less thing to worry about when already faced with possible maintenance issues, injuries, equipment damage, machine failure or a life-threatening accident. Conventional E-Stops may fail or malfunction from dislocation of the contact blocks due to improper installation of the switch, accidental removal of the contact block, improper...

Protection you can trust All X series Emergency Stops are RoHS compliant, UL-listed (XA Series is UL recognized), cUL, TUV, CCC and CE marked. The IDEC XN4E series of padlock-style E-Stops also meets additional safety standards including OSHA and ISO 121002:2003. OSHA (Occupational Safety & Health Administration, U.S. Department of Labor) requires that where the unexpected energization or start-up of equipment could cause injury to operators, the machine or equipment is stopped, isolated from all potentially hazardous energy sources and locked out before employees perform any servicing or...

When Safety Peace of mind The XN series of emergency stops were specifically developed to prevent unauthorized or accidental resetting of latched E-Stop switches. How you ask? XN4E E-Stops offer a higher level of function and safety by allowing the use of up to twelve personal padlocks. For example, when a machine requires maintenance and a technician arrives to repair it. With a conventional E-Stop, the technician presses the emergency stop, works on the machine and then resets the E-Stop to resume operation once the work is finished. But what’s to Install padlock Button Latched With the...

“Our maintenance workers appreciate the added safety of a lockable E-Stop” Maintenance Supervisor Remove padlock and hasp Resume safe operation Maintenance Complete

Revolutionary “Safe Break Action” Design Unrivalled safety: Safe Break Action Technology IDEC Emergency Stop Switches include exclusive technology that has changed the way E-Stop switches are designed. This “safe break action” concept provides greater levels of human safety. Conventional E-Stop switches are designed with spring pressure on the Normally Closed (NC) contacts, keeping them in the closed position and allowing a machine to operate. But improper installation or excessive force to the button in an emergency may break or dislodge a vital part, causing the spring loaded contact to...

www.idec.com/usa/estop Normal Status Safety You Should Know About X-Series E-Stops have lower potential energy in the “Locked” (Latching) position than in the “Normal” (Reset) position. When the switch is damaged from an excessive shock, the main contact (NC) moves toward the OFF (Safe) position. NC contacts: ON (machine can operate) Normal Status NC contacts: OFF (machine cannot operate) NC contacts: ON (machine can operate) NC contacts: OFF (machine cannot operate) Safety Interlock Mechanism Contacts are opened when the operator is locked, and remain opened until the operator is unlocked...

XA & XW E-Stops XA 16mm E-Stops Non-Illuminated 29mm Mushroom PCB Terminals 29mm Mushroom Solder Terminals Illuminated 29mm Mushroom PCB Terminals (24V AC/DC) 29mm Mushroom Solder Terminals (24V AC/DC) Part Number Part Number Part Number Rubber Gasket Locking Ring 9 PC Board Terminal Type Solder Terminal Type 40mm Mushroom Solder Terminals Illuminated 40mm Mushroom PCB Terminals (24V AC/DC) 40mm Mushroom Solder Terminals (24V AC/DC) Gasket Locking Ring 0 PC Board Terminal Type Solder Terminal Type 40mm Mushroom Screw Terminals 60mm Mushroom Screw Terminals Illuminated1 40mm Mushroom Screw...

Part Number 40mm Mushroom LED (24V AC/DC) 40mm Mushroom Push-ON LED2 (24V AC/DC) Locking Ring M3 Terminal Screws Part Number 40mm Mushroom LED (24V AC/DC) 40mm Mushroom Push-ON LED2 (24V AC/DC) Rubber Gasket 1. The light is independent of the position of the switch, except for push-on LED type. 2. The light only operates when the switch is pressed as it is internally wired. XN5E 30mm Flush Mount Bezel E-Stops Illumination Locking Ring 44mm Mushroom Push-ON LED2 (24V AC/DC) Locking Ring Rubber Gasket Part Number Rubber Gasket 1. The light is independent of the position of the switch, except...

IDEC E-Stop Accessories Accessories Description Replacement LED Unit: Solder Terminal Replacement LED Unit: PCB Terminal Terminal Cover for contact block Terminal Cover for contact block Locking Ring Wrench Locking Ring Twist Wrench Lockout Hasp E-Stop Switch Guards E-Stop Series E-Stop Type Applicable Standard Part Number SEMI S2 Compliant (Approved by TUV) SEMI S2 Compliant (Approved by TUV) SEMI S2-0703 12.5.1 & SEMATECH Compliant SEMI S2 Compliant (Approved by TUV) & SEMATECH Part Number 22mm “Emergency Stop” Ø80mm For Jumbo Mushroom

X-Series Technical Information www.idec.com/usa/estop Specifications Non-illuminated -25 to +60˚C (Without Freezing), Illuminated -25 to +55˚C (Without Freezing) Operating Temperature Operating Humidity Storage Temperature Operating Force Pushlock: 10.5N Pull Reset: 10N Turn Reset: 0.16N.m Minimum Force to Latch Pushlock: 32N Pull Reset: 21N Turn Reset: 0.27N.m XN4E Push-to-lock: 32N Pull-to-reset: N/A Turn-to-reset: 0.4 N.m Maximum Stroke to Latch Maximum Stroke 4.5mm 50mΩ maximum (initial value) Contact Resistance Contact Material Gold plated silver Shock Resistance Operating Extremes:...

E-Stop Stations FB Enclosures with HW E-Stops Size & Reset 29mm Pushlock Turn Reset 40mm Pushlock Turn Reset 40mm Push-Pull Reset 40mm Pushlock Key Reset 40mm EMO Pushlock Turn Reset Part Number Plastic Metal Plastic Metal Plastic Metal Plastic Metal Plastic Metal FB Enclosures with XW E-Stops Size & Reset Part Number For added safety, Switch Guards and Nameplates can be used with E-Stop Enclosures