PV-ISOTEST
1 / 4ページ

PV-ISOTEST Instrument for the verification, maintenance and safety of photovoltaic systems up to 1500VDC RD STANDA 2446 IEC/EN6 Building the future since 1983.

Identification and localization of the fault Photovoltaic technology is changing. The design and production of installations increasingly takes into consideration the increase in rated voltage, which allows for the realization of strings up to 30% longer, for a higher generated power and, at the same time, uses a smaller number of components, which allows for the reduction of energy loss (BoS) up to 30%, while improving profitability. In this way, an increasing number of photovoltaic installations are realized with a rated voltage close to 1500VDC, with a view to obtaining the maximization...

INSULATION IN DUAL MODE VERIFIES GFL (Ground Fault Locator) function LOCALIZES Verification with an immediate result (OK | NO) of the insulation resistance of the active conductors of a module, string or entire photovoltaic field, according to the requirements of standard IEC/EN62446, with no need for an external switch to short-circuit the positive and negative terminals. PV-ISOTEST provides the precise position of a possible single fault of low insulation found on a string of the PV system due, for example, to water or humidity infiltrations. IDENTIFIES Automatic identification, with one...

Optional accessories › KITGSC4 Set of 4 banana cables 4mm + 4 alligator clips › KITPCMC4 Set of 2 MC4 banana adapters › VA507 Hard carrying case › SP-5100 Carrying straps › TOPVIEW2006 PC Windows software+ optical/USB connection cable (order code: C2006) › YAMUM0077HT0 User manual on CD-ROM › YAMUM0076HT0 Quick reference guide › ISO calibration report Technical sheet › GFL (GROUND FAULT LOCATOR) FUNCTION Test voltage DC [V] › INSULATION RESISTANCE (MΩ) – DUAL MODE Test voltage DC [V] › INSULATION RESISTANCE (MΩ) – TIMER MODE Test voltage DC [V] › CONTINUITY OF PROTECTIVE CONDUCTORS (RPE)...