カタログ >
HAMAMATSU >
PULSE DELAY GENERATOR C10149

PULSE DELAY GENERATOR C10149
1 / 4ページ

カタログの抜粋

PULSE DELAY GENERATOR The C10149 is a pulse delay generator capable of generat- ing a 3-channel pulse output. The C10149 is controled by a PC (personal computer) for adjusting each timing of devices in a measurement system that uses an ICCD camera, high- speed gated image intensifier unit or photomultiplier tube. Measurement can be made while eliminating excitation light and/or synchronizing the lighting timing with a fast moving •Burst pulse output tShutter timing control of ICCD camera and gated image intensifier unit •Timing control for synchronizing image intensifier gating with laser or strobe light source (lighting) •Timing control for synchronizing image intensifier gating with en- gine combustion or fast moving object (observation target) Miming control for gated photomultiplier tube • LIDAR, fluorescence lifetime measurement, etc. Miming control of measurement equipment and factory automation devices CONNECTION DIAGRAM WITH ICCD CMIBM VIDEO OUTPUT CAMERA CABLE A5963 SERIES ICCD CAMERA C-MOUNT LENS CONTROLLER (SHUTTER SIGNAL) PULSE DELAY CONTROL SOFTWARE

カタログの1ページ目を開く

SPECIFICATIONS GGENERAL Trigger Parameter Mode Number of Input Channel Input Terminal Number of Trigger Channel Number of Pulse Channel Output Terminal Description / Value Internal — — External 1 BNC-R 1 3 BNC-R GTRIGGER INPUT (EXTERNAL TRIGGER) Parameter Signal Level Logic Level Minimum Pulse Width Impedance Repetition Rate Description / Value TTL Positive / Negative (Selectable) 10 ns 1 kΩ 0.1 Hz to 200 kHz GTRIGGER OUTPUT Parameter Output Level Logic Level Internal Trigger Mode External Trigger Mode Delay Time of External Trigger Impedance Pulse Width Description / Value 4.5 V *1...

カタログの2ページ目を開く

I SHUTTER TIMING CHART (EXTERNAL TRIGGER MODE) TRIGGER INPUT PULSE J I. TRIGGER OUTPUT PULSE DELAY TIME OF EXTERNAL TRIGGER 60 ns ± 2 ns < TRIGGER WIDTH (100 ns al INTERNAL TRIGGER) OUTPUT A-B DELAY TIME 120 ns±4ns : The output pule widths and delay time can be set individually and optionally. OUTPUT C DELAY TIME 130 ns ± 4 ns BURST OPERATION (ONLY OUTPUT C) TRIGGER / /TRIGGER INPUT / / OUTPUT ^OUTPUT C m FRONT VIEW SIDE VIEW REAR VIEW File© LED(L) about pu^ut A] ^ Output Ei J Output C ~| Trig Setting Output A Output B Output C ON |Single ^ |Single ^ |Multi ^ Q^J Q File(F) LED(L) about...

カタログの3ページ目を開く

APPLICATIONS GHigh-speed imaging using high-speed gated I.I. unit XENON FLASH LAMP CCD CAMERA WITH FIBER OPTIC PLATE C9018 VIDEO SIGNAL SHUTTER SIGNAL (CCD) OBJECTIVE LENS WITH C-MOUNT GATE I.I. UNIT C9546 SERIES TRIGGER SIGNAL FLASH TRIGGER SIGNAL PULSE DELAY GENERATOR C10149 CONTROL SIGNAL (USB) CONTROL SIGNAL (USB) GFluorescence measurement using gated PMT module FLASH TRIGGER SIGNAL GATE SIGNAL PULSE LIGHT SOURCE SAMPLE / HOLD SIGNAL PULSE DELAY GENERATOR C10149 FLUORESCENCE PMT MODULE WITH GATE FUNCTION H11526 SERIES H11706 SERIES AMPLIFIER UNIT GPhoton counting measurement using PMT...

カタログの4ページ目を開く