HTC - Hi-Tech Components
1 / 32ページ

HI-TECH COMPONENTS ORBITAL WELD AND METAL GASKET FACE SEAL FITTINGS

HAM-LET/HTC® specializes in the design and production of high-quality, specially manufactured valves and fittings for High Purity and Ultra-High Purity applications. A joint effort of HTC®’s expert engineers and technicians resulted in the development a complete line that reflects the company’s deep understanding of the critical requirements of the semiconductor, biotech, and pharmaceutical industries. HAM-LET/HTC® is a leader in the manufacturing of fittings and valves for clean industries and has consistently spearheaded significant new developments in this field. HTC® has broken new...

CONNECTORS The gland bead-to-bead assembly compresses a soft-metal gasket-to-seal. This assembly can be locked by the HAM-LET Grip-Kit (see A below). Visual test and leak testing are performed through two test ports in opposite locations from the female nut. ASSEMBLY INSTRUCTIONS: 1. Be sure to protect all HTC® face-seal fittings until assembly and make up. Exercise great care so that the sealing surfaces are not scratched, damaged or contaminated in any way during handling and assembly. 2. Always use a clean environment, and always employ proper cleanroom protocol for the make up and...

GLAND With shoulder MGS-! Short tube without shoulder MG- MINI BUTTWELDS MINI ELBOW 164 Without shoulder ME- MINI ELBOW REDUCER Without shoulder MER-W UNION With shoulder UB-S 158 HTC HI-TECH COMPONENTS LONG WELD SHAPED CONNECTORS CROSS _ Without shoulder cw-w UNION Without shoulder UB-' THREADED STRAIGHT CONNECTORS

LET-LOK® CONNECTOR FHTL 181 HIGH FLOW CONNECTORS -181 SHORT MALE __ 182 NUT SNM SWIVEL CONNECTORS MALE TO TUBE HMT & ORDERING INFORMATION •(W 33 HAM-LET ADVANCED CONTROL TECHNOLOGY Size Designator Surface Level Designator To indicate the desired level of polish, please add “E” or “H” to the part Number: E - With Electropolish H - Without Electropolish S - With Shoulder W - Without Shoulder P - 316L/316L VOD (AOD) V - SS316L Var or Vim/VaK1) LM - Low Manganese H - Alloy C-276 |*NI - Nickel *SS Stainless Steel * For Gaskets only (1) Per SEMI F20-0305

GL-W LONG GLAND Without shoulder CONNECTORS Ordering Information GL-S LONG GLAND With shoulder Ordering Information Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

GM-W MALE GLAND Without shoulder Ordering Information GS-W SHORT GLAND Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157). HAM-LET ADVANCED CONTROL TECHNOLOGY

GS-S SHORT GLAND With shoulder CONNECTORS Ordering Information MGS-W MINI SHORT GLAND Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

MGS-S MINI SHORT GLAND With shoulder Ordering Information Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157). HAM-LET ADVANCED CONTROL TECHNOLOGY

SOCKET WELD GLAND CONNECTORS Ordering Information ME-W MINI ELBOW Without shoulder Ordering Information Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

MER-W MINI ELBOW REDUCER Without shoulder Ordering Information CONNECTORS ME-45°-W MINI ELBOW 45° Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page HAM-LET ADVANCED CONTROL TECHNOLOGY 57).

MEX-W MINI ELBOW With extended leg Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

MTR-W MINI TEE REDUCER Without shoulder Ordering Information CONNECTORS MINI CROSS Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157). HAM-LET ADVANCED CONTROL TECHNOLOGY

MTB-W MINI TRI-EL Without shoulder CONNECTORS Ordering Information RU-W REDUCING UNION Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

ELBOW UNION Ordering Information Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page HAM-LET ADVANCED CONTROL TECHNOLOGY

CROSS UNION CONNECTORS Ordering Information MALE ELBOW Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).

Ordering Information CONNECTORS TW-W TEE Without shoulder Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157). HAM-LET ADVANCED CONTROL TECHNOLOGY

TWR-W TEE REDUCER Without shoulder CONNECTORS Ordering Information Dimensions are for reference only, and are subject to change without notice. When ordering, be sure to add the Surface-Finish Designator (either H or E) to the Part Number. (See Material Table, page 157).