カタログの抜粋
WELDING AND CUTTING AUTOMATION ARC LENGTH SYSTEM | PLASMA AND TIG The Arc Length System is used in combination with TIG welding and plasma cutting power sources to give automatic control of the arc voltage to maintain arc length. The ALS monitors the arc voltage by comparing it with the level set on the TP-300-AVC front control panel and makes changes to the torch position as necessary. Once the torch height has been selected it will be maintained despite any changes in the height of the work piece. The Arc Length System can be used for DC or AC welding using TIG or Plasma cutting processes and is manufactured to be extremely durable. The linear slide is robust needing no maintenance or lubrication and is completely dust and dirt resistant. MAINTAIN CONSISTENT WELDING AND CUTTING QUALITY ARC VOLTAGE DETECTION AUTOMATICALLY MAINTAINS TORCH POSITION
カタログの1ページ目を開く
One unit for both TIG and Plasma applications Precision control of the torch positioning using the control box adjustments LED Digital Readout of preset parameters Arc Length Control Timer: Start delay can be set between 0 - 10 Seconds Precision control of the sensitivity and actuator speed of the corrective changes made to the arc length Control shows when welding current is flowing and start delay time has elapsed Control Box can be mounted on an Idler Carriage or stands freely on its own Auxiliary supply power: 110V (105-120V) 50/60hz 1A max or 230V (220-240V) 50/60hz 0.6A max Welding /...
カタログの2ページ目を開くGullco International Limitedのすべてのカタログと技術パンフレット
-
KAT® 300 SERIES2 ページ
-
GK-2002 ページ
-
GOV 100 FH - 1002 ページ
-
Pipe KAT- Rigid Band4 ページ
-
Pipe KAT - Operation56 ページ
-
GK-1921 ページ
-
rigid kat1 ページ
-
Welding Positioner4 ページ
