カタログ >
Guangdong Jian Qiao Testing Equipment Co., Ltd. >
JQ-8104

JQ-8104
1 / 2ページ

カタログの抜粋

Product introduction The high-altitude low-pressure test machine is used to simulate the detection of battery leakage, shell rupture, fire or explosion in a test environment with a constant temperature or variable temperature (ie high altitude). Test purpose and description Test purposes Battery low pressure (high altitude) simulation test, all tested samples are tested under a negative pressure of 11.6 kPa (1.68 psi) Test description Single battery safety test Low air pressure (GB/T 31241 -2014) a) Single battery charging b) In the low-pressure tank of the single-cell battery method, the air pressure in the test chamber is adjusted to 11.6kpa, the temperature is room temperature, and it is allowed to stand for 6h. c) Observation 1 h Battery module safety test Low air pressure (GB/T 31485-2015) a) Battery module charging d) The battery module is placed in a low-pressure test chamber, and the air pressure in the test chamber is adjusted to 11.6kpa, the temperature is room temperature, and it is allowed to stand for 6h. c) Observation 1 h

カタログの1ページ目を開く

Fulfill the standard GB 31241-2014 "Lithium-ion batteries and battery packs for portable electronic products - Safety requirements" standard requirement: After the battery was fully charged according to the specified test method, the battery was placed in a vacuum chamber at 20 ° C ± 5 ° C, and the pressure inside the chamber was reduced to 1 1.6 kPa (simulated altitude 1 5240 m) by vacuuming for 6 h. Receiving criteria:There should be no disintegration or fire. Installation environment requirements 1. Ambient temperature: room temperature - 30° C 2. Ambient humidity: <20%~ 65±5%R.H 3. Air...

カタログの2ページ目を開く