カタログ >
GESA TERMOMETROS >
M0101 series

M0101 series
1 / 1ページ

カタログの抜粋

Pressure gauge with plastic case Designed to monitor pressure in systems not subjected to vibrations. Suitable for all gaseous and liquid media that will not obstruct the pressure system or attack copper alloy parts. Especially designed for pneumatic circuits, ﬁlters, pressure regulators... Manufactured according to EN 837-1 standards. STANDARD PARAMETERS Design: EN 837-1 Closing: Adjusted display Mounting: See attached diagram A or B Threaded connection: Ø40: 1/8”BSPT; Ø50-Ø63: ¼”BSPT (UNE-EN 10226-1) IP protection: IP44 (EN 60529 / IEC 529) Accuracy: Class 2.5 Pressure limits: Static: ¾ end of scale Oscillating : ⅔ end of scale Maximum: Full scale for a short period of time Temperature limits: Environment: -40+60°C Fluid: 60°C Pressure range: -1...0...25 Bar Scale: Bar/Psi Subdivision: According to standard EN 837-1 Sensor: Bourdon tube (“C” form) Position pointer: Red pointer (only for ranges 0+4/0+6/0+12) MATERIALS Case: Polyethylene Bourdon tube and moving parts: Copper alloy · Compressed air · Compressor · Air conditioning · Hydraulics · Pneumatic Threaded connection: Brass Display: Acrylic Dial: White laquered aluminum Pointer: Black laquered aluminum Welding: Cu-Sn Red pointer: Red Plastic DIMENSIONS (mm) DN 7 points certiﬁcate Without certiﬁcate 7.Calibration certiﬁcate traceable to ENAC M1 Gesa Termómetros S.L. · C/ Barrikako Bidea Pol. Ind. Igeltzera Pabellón D3 · 48610 Ur

カタログの1ページ目を開く