VARINLINE® Measurement and Control Technology
1 / 8ページ

VARINLINE > Measurement and Control Technology > Keep an eye on your valuable product Process Equipment GEA Tuchenhagen size="-1">

Matrix piping, now encountered increasingly in the process technology industry, converts plant equipment into closed systems that prevent the operator from looking into his production process.Control instruments and sensors are integrated into the system to maintain transparency in the producti-on process. CIP/SIP cleaning and sterilization are on an equal footing with the actual functionability of instrumentation for applications in the brewing and beverage industries, in the milk processing industry as well as in the chemical, pharmaceutical and cosmetic industries. In-Line control and...

Key features of the VARINLINE > ή access unit can be welded into the pipe circuit - no domes; no sumps֖sealed gap-free against the product by means of an O-ringconnections for instrumentation independent ofpipe diameters and process variables֖various pipe diameters in Metric: Outside diameter acc. to DIN 11850, Row II, DIN 11866, Row A, 1.4404 / 316L ISO: Outside diameter acc. to DIN EN ISO 1127, 1.4435 / 316L Inch OD: Outside diameter to BS 4825 Part I, Outside diameter following ASME-BPE-a-2004, DIN 11866, Row C, 1.4404 / 316L Inch IPS: Outside diameter acc. to IPS Sch. 5, 1.4404 /...

TemperaturePressure ManometerThermometerTemperatureSensor PressureTransmitte r VARINLINE Process connections B 1531 mm Type SizeOpening F 2550 mm N 50/4068 mm G 125/100125 mm Type > Pipe nominal widthsDNInch ODInch IPSISO Connection fittings >

Flow Liquid Detection SamplingLevelVisual Monitoring > Flow SwitchElectrode Hydrostaticpressure measurement Sight GlassilluminatedSight GlassSamplingValveTurbidity andColour SwitchesConductivityMeter 5 >

VARINLINE > ή access unit The VARINLINE > access unit is used for the integra-tion of control and measurement instruments into pipe systems of diameters designed for lowest liquid and gas volumes up to very large product volumes. Two control and measurement instruments maximumcan be incor-porated into this type of process connec- tion fitting. The VARIVENT The VARINLINE > ή connection flanges > U-flangeT-flange P-flange connection flange allows the installa-tion of control and measurement instruments also at tanks, using the proven VARINLINE > ή process connec-tion as connection element....

Example Temperature sensor > 50 left: dead corner in the thermometer elbow right: no-gap, no dead cor- ner installation as per the VARIVENT > > 100 C Ю principles > 8.986 Example Pressure transmitter top: installation with IDFunion below: no-gap installationas per the VARIVENT > principles 7 >

Am Industriepark 2-10, 21514 Bchen, GermanyPhone +49-4155 49-0, Fax +49-4155 49-2428 sales.geatuchenhagen@geagroup.com, www.tuchenhagen.com > Fa 624e-06/08 size="-1">