カタログ >
GE Grid Solutions >
Models PTG4-1-75 & PTG4-2-75

Models PTG4-1-75 & PTG4-2-75
1 / 2ページ

カタログの抜粋

Models PTG4-1-75 & PTG4-2-75 Indoor Voltage Transformers Medium Voltage Accuracy Class Thermal Rating 0.3 WXMY 1.2ZZ at 100% rated voltage with 120 V based ANSI burden. 0.3 WXMY, 1.2Z at 58% rated voltage with 69.3 V based ANSI burden. Approximate weight 85 lbs. unfused. Maximum System Voltage 9.52 kV, BIL 75 kV. REGULATORY AGENCY APPROVALS Manufactured to meet the requirements of ANSI/IEEE C57.13. Classified by U.L. in accordance with IEC 44-1 NOTE: All Primary voltages marked with an asterisk (*) are approved for revenue metering in Canada by Industry Canada, Approval No. AE-0429

カタログの1ページ目を開く

Circle Diagram Recommended Minimum Spacings A = Unit to Unit = 1.00” minimum. B = HV to Ground in air = 4.50” minimum. Recommended spacing are for guidance only. User needs to set appropriate values to assure performance for high potential test, impulse test, high humidity, partial discharge, high altitude, andother considerations like configuration. (a) Two fuse transformers should not be used for Y connections. It is preferred practice to connect one lead from each voltage transformer directly to the neutral terminal, using a fuse in the line side of the primary only. By using this...

カタログの2ページ目を開く