
カタログの抜粋

INSTRUMENT TRANSFORMERS PRODUCT S OLUTIONS KOTEF Combined CT/VT 72.5 to 420 kV The KOTEF is designed to provide both current and voltage measurements from a single device. Design and advantages As with separate transformers, the current transformer part is located in the head housing and the voltage transformer part in the base tank. The bushings between high-voltage potential and ground potential are arranged in opposite directions inside the insulator. The base dimensions remain the same as a voltage transformer of the same nominal voltage. The CT and VT functions are fulfilled within a single unit. KOTEF utilizes the same components as the individual CTs and VTs. Both transformers are combined in a single metering unit and are available in porcelain or composite. This is an excellent solution for adding metering capability to either a new substation installation or a site being upgraded where space is at a premium. Conseguently, considerable cost savings are realized in the initial purchase price, transportation, real estate and installation labor and materials compared to the eguivalent costs of two separate transformers. The KOTEF Line combines the advantages and design features of the O SKF and OTEF lines. MAIN FEATURES LONG SERVICE LIFE AND NEAR Metering and protection Characteristics: - High guality paper-oil insulation - Oil expansion and hermetic seal by stainless steel diaphragm bellows - Oil level indicator - Cores in heavy walled aluminum housing - Changing of primary ratio by primary connection (single, double or guadruple ratio) orbysecondarytaps S eismic designs available Compliance with ANSI/IEEE standards, other standards on reguest. ZERO MAINTENANCE Insulation integrity is assured by the fact that the oil is hermetically sealed from the atmosphere by a metallic diaphragm assembly. All external parts are of corrosion-resistant material. Therefore, regular painting is not reguired. KOTEF have been designed for a 30 years plus lifetime. CUSTOMER BENEFITS • Price advantage • Space savings: only one base • Cost savings on transportation and installation • Reduction in Inventory • Protection against bursting • Maintenance-free
カタログの1ページ目を開く
CURRENTTRANSFORMER DESIGN Head type design, with active parts in the head. The primary is normally a straight bar type conductor with low inductance. Therefore primary surge protection is not re q uired. Ratio change can be accomplished either by primary bar series-parallel connection (single, double or q uadruple ratio) or by secondary taps. Combinations of series-parallel connection and secondarytaps are also possible. The head type design also has the advantage of spreading the primary flux uniformly and symmetricallythrough the cores, avoiding local saturation and reducing the leakage...
カタログの2ページ目を開く
HIGH QUALITY INSULATION The insulation paper is applied mechanically, guaranteeing a homogenous, high-density paper insulation. Defined grading layerswith field-optimized electrode rings achieve a uniform field distribution along the insulator between line and ground. Most of the insulation is from Kraft paper. The coil insulation is a closed style design resulting in a compact unit with good dielectric withstand characteristics. Surge arrestors to protect the KOTEF are not necessary. High quality mineral oil with excellent aging stability and gas-absorbing properties is used. The oil...
カタログの3ページ目を開く
COMBINED CT/VT PRODUCT SOLUTIONS KOTEF DIMENSIONS Except the ERCT line current transformers are for specific projects custom made products. The following dimensions refer to certain standard versions. Other requirements might effect the dimensions. The b ase tank size can vary b ased on transformer output requirements and/or frequencies less than 60 Hz. The head size ofthe CT portion depends on the ratings of the cores, the primary current and the thermal short-time current. Other head sizes and longer creepage distances can b e provided. Maximum system voltage (Um) kV_72.5_123_145_170...
カタログの4ページ目を開くGE Grid Solutionsのすべてのカタログと技術パンフレット
-
Kelman TRANSFIX
2 ページ
-
Kelman MINITRANS
2 ページ
-
MIG
3 ページ
-
DTR
4 ページ
-
SPM
8 ページ
-
TOV
3 ページ
-
MDS SD Series
4 ページ
-
MIC
2 ページ
-
Multilin F60
9 ページ
-
Model PT6-2-125
2 ページ
-
Model PT6-1-125
2 ページ
-
Model 3PT3-60
2 ページ
-
MIG II
8 ページ
-
Model JVW-110C
2 ページ
-
Model JVW-5AC-1
2 ページ
-
Model JVW-5C
2 ページ
-
Multilin T60
9 ページ
-
Multilin 489
9 ページ
-
Multilin™ D25
8 ページ
-
Multilin D485
1 ページ
-
Multilin P485
1 ページ
-
MultiNet
3 ページ
-
iNET-II
4 ページ
-
MDS™ iNET 300
2 ページ
-
MDS iNET 900®
2 ページ
-
Multilin™ PQM II
8 ページ
-
Multilin L90
10 ページ
-
COSI
2 ページ
-
Reason DR60
4 ページ
-
Multilin 850
4 ページ
-
G650
8 ページ
-
Hydran M2
2 ページ
-
MultiLink ML3000 Series
12 ページ
-
TN1U
4 ページ
-
Multilin™ MM200
8 ページ
-
Multilin™ MM300
8 ページ
-
Multilin 339
16 ページ
-
Multilin 469
10 ページ
-
Multilin A60
6 ページ
-
Multilin 350
16 ページ
-
Multilin F650
12 ページ
-
Multilin 750/760
10 ページ
-
F35
8 ページ
-
345
12 ページ
-
745
8 ページ
-
Multilin G30
9 ページ
-
Air-Core Reactors
8 ページ
-
Multilin UR & URPlus
18 ページ
-
Multilin C30
6 ページ
-
Voltage Regulators
16 ページ
-
g3 Technology
2 ページ
-
Rectifier
4 ページ
-
RMIO
2 ページ
-
MiCOM Agile P54A/B
2 ページ
-
MultiSync™ 100
6 ページ
-
Multilin G60
9 ページ
-
Multilin D400
12 ページ
-
GL 107X
2 ページ
-
Disconnectors
12 ページ
-
CGVB-05
2 ページ
-
FK
4 ページ
-
B65
4 ページ
-
COSI-RogoFlex
2 ページ
-
Grid-GA-L3-COSI_CEVT
2 ページ
-
MiCOM Agile P24x
8 ページ
-
239 Motor Protection
8 ページ
-
Power Transformers
8 ページ
-
smorb
3 ページ
-
MIF II
8 ページ
-
SR family
2 ページ
-
735/737
4 ページ
-
hid
2 ページ
-
dtp
5 ページ
-
IEC Oil Filled & SF
12 ページ
-
Gas Insulated Switchgear
24 ページ
-
Multilin UR & UR Plus
18 ページ
-
M60
8 ページ