
カタログの抜粋

Transformer Protection 745 Transformer Protection System High-speed, draw-out transformer protection and management • Easy to use Transformer Protection System supported by industry leading suite of software tools to optimize transformer performance and to extend life expectancy • Improved security for transformer energization using superior Adaptive 2nd Harmonic Restraint algorithm • Accurate built-in metering functions - Eliminates auxiliary metering devices and reduces cost • Advanced automation capabilities using FlexLogic to provide customized protection and control solutions • Fast, flexible and reliable communications - Embedded 10BaseT Ethernet capability provides faster data transfer for improved system performance • Minimize replacement time - Draw-out construction ideal in industrial environments • Reduce troubleshooting time and maintenance costs - IRIG-B time synchronization, event reports, waveform capture, data logger • Simplified testing - Built in simulation features for setpoint verification including waveform playback for relay setting verification • Cost effective access to information - Modbus and DNP 3.0 Level 2 protocols through embedded Ethernet, standard RS232, RS485 & RS422 serial ports. • Globally accepted - Member of the most renowned product family in the market. • Extended life - Optional conformal coating for chemically corrosive and humid environments • Fast and easy troubleshooting, improved maintenance procedures and increased device security - Security Audit Trail provides detailed traceability for system configuration changes Applications • Primary and back-up protection and management of small, medium and larger power transformers, autotransformers and reactors • Transformer asset monitoring using Hottest Spot, Loss-ofLife and Aging Factor • Stand-alone or component in automated substation control system Features Protection and Control • Variable dual-slope percent differential protection • Metering - current, voltage, sequence components per winding, power, energy, voltage • THD and harmonics up to the 21st • Event recording - 128 time tagged events • Tap position up to 50 tap positions • Ambient temperature /analog transducer input Magnetizing inrush and overexcitation blocking Phase & ground overcurrent elements Adaptive time overcurrent using FlexCurves elements Underfrequency/Overfrequency Protection • Frequency rate-of-change Detection • Overexcitation (V/Hz) Protection • Restricted Ground Fault Protection • Transformer overload protection Communications • Networking interfaces - 10Mbps Ethernet, RS232, RS485 and RS422 ports • Ethernet port, 10Mbps • Multiple protocols - ModBus™ RTU, ModBus™ RTU TCP/IP, DNP 3.0 Level 2 Digital Energy Multilin • Analog transducer input • Oscillography & Data Logger - 10 records up to 32 power cycles • Simulation mode and playback capability. EnerVista™ Software • Sophisticated software for configuration and commissioning • Graphical Logic Designer and Logic Monitor to simplify designing and testing procedures • Document and software archiving toolset • EnerVista™ Integrator providing easy inte
カタログの1ページ目を開く
745 Transformer Protection System signal for better through fault stability under CT saturation conditions. The 745 offers great performance in dealing with magnetizing current inrush, by providing three program able restraint m methods, each of which can be enabled or disabled by the user. An increase in transformer voltage or decrease in system frequency may result in overexcitation of the transformer. It is often desirable to prevent operation of the percent differential element in these cases therefore a fifth harmonic inhibit is integrated into the percent differential element to cater...
カタログの2ページ目を開く
745 Transformer Protection System Multiple Settings Groups For Delta/Wye impedance grounded transformers, overcurrent protection is particularly difficult to set . A negative sequence based overcurrent element provides the required sensitivity phase faults. Each winding is given its own element with the same programmable characteristics as the phase and neutral TOC elements. This feature provides an estimate of how much of the transformer’s total insulation life has elapsed (based on IEEE Standards C57.91-1995, “IEEE Guide for Loading Mineral-Oil-Immersed Transformers,” and C57.96-1989,...
カタログの3ページ目を開く
745 Transformer Protection System Output Relays Transformer Protection One high-speed solid state electronic output can be activated by any protection element through user-defined FlexLogic™ equa ions or directly assigned from a t protection element. Seven of the eight electro-mechanical relay outputs can be activated by the protection elements according to FlexLogic™ equations or directly assigned from a protection element. One output is factory set as an internal self-test failure alarm relay. Monitoring and Metering The 745 features advanced metering functions including: Currents The 745...
カタログの4ページ目を開く
745 Transformer Protection System The 745 offers additional features designed for ease of use: Auto CT Configuration All CTs are connected in a wye configuration for simplicity. All phase and magnitude corrections as well as zero-sequence current compensation are performed automatically based on a choice of over 100 transformer types. Dynamic CT Ratio Mismatch Correction Variances in on-load tap position output are monitored and corrected. In addition, external compensation CT’s are not required. Field Upgradable Option An optional pass-code key may be purchased to allow field upgrades....
カタログの5ページ目を開く
745 Transformer Protection System Transformer Protection Typical Wiring Multilin 745 Transformer Protection System
カタログの6ページ目を開く
745 Transformer Protection System Technical Specifications protection Signal source: Winding 1 Phase A current/ voltage Level accuracy: ±0.02 Hz Operate time (delay set to 0.0 sec): Solid state output: @3% beyond pickup: 120–150ms Relay outputs 2 – 5: @ 3% beyond pickup: 125–155ms OVEREXCITATION on 5th harmonic level Definite time element: Operating current pickup: 0.03 – 1.00 in steps of 0.01x CT 0.1 – 99.9 in steps of 0.1% Pickup level: Dropout: 95% of pickup Time delay: 0 – 60,000 sec in steps of 1 sec Signal source: All phase currents Operate time (delay set to 0.0 sec): Solid state...
カタログの7ページ目を開くGE Grid Solutionsのすべてのカタログと技術パンフレット
-
Kelman TRANSFIX
2 ページ
-
Kelman MINITRANS
2 ページ
-
MIG
3 ページ
-
DTR
4 ページ
-
SPM
8 ページ
-
TOV
3 ページ
-
MDS SD Series
4 ページ
-
MIC
2 ページ
-
Multilin F60
9 ページ
-
Model PT6-2-125
2 ページ
-
Model PT6-1-125
2 ページ
-
Model 3PT3-60
2 ページ
-
MIG II
8 ページ
-
Model JVW-110C
2 ページ
-
Model JVW-5AC-1
2 ページ
-
Model JVW-5C
2 ページ
-
Multilin T60
9 ページ
-
Multilin 489
9 ページ
-
Multilin™ D25
8 ページ
-
Multilin D485
1 ページ
-
Multilin P485
1 ページ
-
MultiNet
3 ページ
-
iNET-II
4 ページ
-
MDS™ iNET 300
2 ページ
-
MDS iNET 900®
2 ページ
-
Multilin™ PQM II
8 ページ
-
Multilin L90
10 ページ
-
COSI
2 ページ
-
Reason DR60
4 ページ
-
Multilin 850
4 ページ
-
G650
8 ページ
-
Hydran M2
2 ページ
-
MultiLink ML3000 Series
12 ページ
-
TN1U
4 ページ
-
Multilin™ MM200
8 ページ
-
Multilin™ MM300
8 ページ
-
Multilin 339
16 ページ
-
Multilin 469
10 ページ
-
Multilin A60
6 ページ
-
Multilin 350
16 ページ
-
Multilin F650
12 ページ
-
Multilin 750/760
10 ページ
-
F35
8 ページ
-
345
12 ページ
-
Multilin G30
9 ページ
-
Air-Core Reactors
8 ページ
-
Multilin UR & URPlus
18 ページ
-
Multilin C30
6 ページ
-
Voltage Regulators
16 ページ
-
g3 Technology
2 ページ
-
Rectifier
4 ページ
-
RMIO
2 ページ
-
MiCOM Agile P54A/B
2 ページ
-
MultiSync™ 100
6 ページ
-
Multilin G60
9 ページ
-
Multilin D400
12 ページ
-
GL 107X
2 ページ
-
Disconnectors
12 ページ
-
CGVB-05
2 ページ
-
KOTEF
4 ページ
-
FK
4 ページ
-
B65
4 ページ
-
COSI-RogoFlex
2 ページ
-
Grid-GA-L3-COSI_CEVT
2 ページ
-
MiCOM Agile P24x
8 ページ
-
239 Motor Protection
8 ページ
-
Power Transformers
8 ページ
-
smorb
3 ページ
-
MIF II
8 ページ
-
SR family
2 ページ
-
735/737
4 ページ
-
hid
2 ページ
-
dtp
5 ページ
-
IEC Oil Filled & SF
12 ページ
-
Gas Insulated Switchgear
24 ページ
-
Multilin UR & UR Plus
18 ページ
-
M60
8 ページ