カタログ >
Formlabs >
Draft Resin

Draft Resin
1 / 2ページ

カタログの抜粋

MATERIAL DATA SHEET Draft Resin Draft Resin for Truly Rapid Prototyping $149 / L Our fastest printing material, Draft Resin is suitable for printing large, bulky parts guickly. With a 300 micron layer height, it has acceptable accuracy for prototyping needs while enabling faster design iterations. Same day design iterations Large, bulky parts or multiple part assemblies To the best of our knowledge the information contained herein is accurate. However, Formlabs, Inc. makes no warranty, expressed or implied, regarding the accuracy of these results to be obtained from the use thereof.

カタログの1ページ目を開く

1 Material properties can vary with part geometry, print orientation, print settings, and temperature. 2 Data was obtained from green parts, printed using Form 2, 300 Urn, Draft Resin settings, washed for 5 minutes in Form Wash and air dried without post cure. 3 Data was obtained from parts printed using a Form 2, 300 micron, Draft Resin settings, and post-cured with Form Cure at room temperature for 5 minutes. 4 Data was obtained from parts printed using a Form 2, 300 micron, Draft Resin settings, and post-cured with Form Cure at 60 °C for 5 minutes. FORMLABS MATERIAL PROPERTIES - DRAFT...

カタログの2ページ目を開く