Pallet system XK
1 / 16ページ

System information X85P XH XK XKP X180 X300 GR CS Pallet handling components for conveyor system XK The pallet handling components for conveyor system XK satisfy the demands for a sturdy pallet conveyor for medium to heavy loads in demanding environments. Heavy-duty conveyor beams, sturdy product carriers (pallets), and a strong chain permits item weights up to 30 kg. The maximum size of the products on the pallets depends on the shape of the products and the location of their centre of gravity. Robust side support components permit accumulation up to 200 kg per stop device, even in wheel bends. Divert/merge devices Divert/merge devices are used for routing products by dividing or combining flows of products. RFID functions All pallets are equipped with sockets for RFID chips. System components for automatic pallet handling are available. Please contact FlexLink Systems for more information “Conveyor chains” in catalogue section “Conveyor system XK”. The standard plain chain XKTP 5 cannot be used. Examples of application areas Transport and assembly of pistons, water taps, connecting rods, ball and roller bearings, gear wheels, crankshafts, and hydraulic pumps. Function modules Several pre-designed function modules, including merge, divert and locate functions, can be ordered using the online configuration tool. Please contact FlexLink Systems XD for more information. Pallet loading The centre of gravity of the product on the pallet (including fixture) must be located inside a 40 mm × 140 mm rectangle on the pallet. See figure. TR Chain for XK pallet handling Technical characteristics A special chain type XKTP 5 A was developed for use with the XK pallet handling system. Since XKTP 5 A can also be used in non-pallet systems, it is listed under System information

Pallets Pallet 200×150 with RFID socket RFID socket Fully assembled unit, including two guide discs and RFID socket. Weight: 1,4 kg. Pallet plate: cast aluminium. Guide disc: acetal resin POM. See page 257 for detailed pallet dimensions. Pallet 250×225 with RFID socket RFID socket Fully assembled unit, including two guide discs and RFID socket. Weight: 1,8 kg. Pallet plate: cast aluminium. Guide disc: acetal resin POM. See page 257 for detailed pallet dimensions. Pallet 300×300 with RFID socket RFID socket Note. This pallet cannot be accumulated through 180° bends. Fully assembled unit,...

Pallet accessories/spare parts Damped guide disc XKPG D105 A is particularly useful: • for conveyor speeds ≥10 m/min to reduce noise from collisions between pallets to reduce shock for sensitive products Guide disc with integrated damping function to reduce the total queue pressure that arises when stopping longer, heavier pallet queues and includes guidance towards the pallet plate and to be more wear resistant it also includes a steel insert, placed where the stop arm acts. XS X65 X65P Guide disc with damping Damped guide discs have to be ordered as a complement. Standard pallets (XKPP)...

RFID components RFID tag Read/write head The RFID tag can be read reliably at speeds up to 30 m/min. The tag has an M5 grub screw like design and is mounted in a plastic holder. The read/write heads exchange data with the passive RFID tags at a maximum distance of 20 mm. The read/write head has an M12 connector. The M12 cable is connected to an M12 ASi socket. Up to 31 read/write heads can be connected to one ASi system. Threaded type Operating frequency 224 (7 pages with 32 bits each) Read/write head Read/write head Read/write head bracket 5058872 RFID tag holder is included in all pallets...

Pallets XKPP 200×150 A, XKPP 250×225 A Pallets XKPP 200×150 A, XKPP 250×225 A

Pallet XKPP 300×300 A + guide discs XKPG XKPG 105 (Spare part only) Shock absorber Hole for guide pins ∅3 Pallet XKPP 300×300 A + guide discs XKPG

Slide rails Slide rails Rivet crimping pliers Rivet crimping pliers For 4 mm rivets Slide rail Length 25 m UHMW-PE (White) PVDF (Natural white) PA-PE (Grey) XKCR 25 U XWCR 25 P XKCR 25 H Plastic screw for slide rail Aluminium rivet (brown colour) Rivet crimping clamp *Note. Must be ordered in multiples of 50* **Note. Must be ordered in multiples of 250** XK Rivet crimping clamp For 4 mm rivets (Allen key not included) Guide rails (dry applications) X300 Guide rails for pallets in bends 30° Guide rail for pallets in bends Outer guide rail, 30° Inner guide rail, 30° Guide rails for dry...

Guide rails (dry applications, continued) Guide rails for pallets in bends 90° Guide rails for pallets in bends 180° Guide rail for pallets in bends Outer guide rail, 90° Inner guide rail, 90° Guide rail for pallets in bends Outer guide rail, 180° Inner guide rail, 180° Including connecting strips Including connecting strips Drip catchers (wet applications) Drip catcher for wheel bend 30° Drip catcher kit for 30° bend ABS plastic. Including screw kit Drip catchers for wet applications Drip catcher for wheel bend 45° Straight guide rail with drip catcher R200 Guide rail with drip catcher...

Drip catchers (wet applications, continued) Drip catcher for wheel bend 90° PO Drip catcher for wheel bend 180° Drip catcher kit for 90° bend ABS plastic. Including screw kit Drip catcher kit for 180° bend ABS plastic. Including screw kit Drip trays Drip tray Length 3 m See page 249 for more information. Guide rail bracket Mounting toolkit for guide rail Mounting toolkit for guide rail Guide rail bracket for XK pallets Note. Designed for use with chain XKTP 5 A. Chain XKTP 5 cannot be used for XK pallet handling. Use the kit to ensure that the guide rails are attached with a correct and...

Pallet locating station Pallet locating station Pallet Pallet Bracket for proximity switch Cable feed-through Pneumatic locating station (A) = located, (B) = non-located. Note. Designed for use with chain XKTP 5 A. Chain XKTP 5 cannot be used for XK pallet handling. Frame: cast aluminium. Rulers and guide pins: hardened steel. Locating accuracy: ±0,1 mm. Maximum vertical force per ruler at 0,6 MPa: 600 N including pallet weight. The locating station should be installed on a separate support which is not rigidly connected to the conveyor beam. Specify the locating station with guide rails...