Conveyor system XS
1 / 14ページ

System information Examples of application areas Small ball bearings, perfume bottles, pharmaceutical bottles, sintered metal components. Technical characteristics Features Chain permits transport of very small items which are otherwise difficult to handle. Compact and neat design. System information

Conveyor modules Straight conveyor Support modules – single and multi-lane 5995387 Single two/three-point Multi single 2 lane Multi single 3 lane Multi single 4 lane Multi double 3 lane Single foot plate Conveyor module – straight * Single end guide roller Single diecast Multi double 4 lane *Use online configurator when ordering L1 Conveyor module – one bend * *Use online configurator when ordering L2 Conveyor module – two bends * *Use online configurator when ordering Conveyor modules

Chains XS Other chains Plain chain See the Chain guide for selection of other chains. Chain installation See Appendix “D. Chain installation” on page 527, Cleated chain, Type G X65 Plain chain Length 5 m Plain chain (Ultra low wear) Length 5 m Plain link kit (Ultra low wear) Note. Link kit contains 10 links, 10 pivot, 10 steel pins. Cleated chain, Type D Cleated chain Type G Length 5 m h=3 h=5 h=9 XSTF 5×3 G XSTF 5×5 G XSTF 5×9 G Use the online configurator to specify and order. Cleated link kits h=3 h=5 h=9 Note. Link kit contains 10 links, 10 pivot, 10 steel pins. Cleated chain Type D,...

Chain accessories XS Plastic pivot for chain XLTT 9×16 Pin insertion tool for chain XLMJ 4 Pin insertion tool XS-X65-XT XS-X65-XT, PRO version* XLMJ 4 XLMJ 4 P *This product is recommended for frequent users.

X65P Beam Length 3000 +10/-0 mm Length to order (30- 3000 mm) Slide rail: see page 106 Beam accessories XS Connecting strip with set screws Beam spacer Connecting strip with set screws h=20, a=30, b=50, L=130 Cover strip for T-slot, PVC Beam spacer Aluminium, anodized Length 3 m Cover strip for T-slot, PVC Length 25 m For connection of two conveyor beams side to side. Use M8 screw and slot nut. Two holes must be drilled, one through the spacer (9 mm) and one through the beam, to allow insertion of the screw. The diameter of the second hole depends on the size of the screw head.

Slide rails XS Plastic slide rails for XS beam XSCR 25 Rivet crimping clamp XSCR 25 U Slide rail Length 25 m HDPE (μ=0,1–0,25) (Black) PVDF (μ=0,15–0,35) (Natural white) UHMW-PE (μ=0,1–0,25) (White) PA-PE (μ=0,1–0,25) (Grey) XSCR 25 XSCR 25 P XSCR 25 U XSCR 25 H Rivet crimping clamp for XS For 3 mm rivets Cover strip Mounting tool for slide rail 4 3,4 1,6 Mounting tool for slide rail XS, X65 XLMR 140 Aluminium rivets Aluminium rivets 3 mm for XS conveyors Extra slide rail in plain bends must be anchored using plastic screws due to lack of space for the rivet crimping tool. Note. Contains...

Drive and idler units – introduction CC Drive unit types The XS system includes several configurations, including direct driven units with suspended motor and transmission chain as well as drive units. Available motors include variable speed types (V) as well as fixed speed motors (F). Note that dimensions relating to drive unit motors depend on the motor specified during the configuration. End drive units Size Direct drive, slip clutch Suspended motor, transmission chain, slip clutch Wheel bend drive units Suspended motor, transmission chain, slip clutch Double drive units Size Suspended...

End drive units XS End drive unit, suspended motor, slip clutch 80 End drive unit, suspended motor, slip clutch 80 End drive unit Fixed speed up to 60 m/min Transmission on left side Fixed speed Without motor (ISO) Without motor (ANSI) XSEB XSEB 0 HL XSEB 0 HLA Maximum traction force: 500 N. See page 22. Use online configurator when ordering. Effective track length: 0,80 m End drive unit Fixed speed up to 60 m/min Transmission on right side Fixed speed Without motor (ISO) Without motor (ANSI) XSEB XSEB 0 HR XSEB 0 HRA Maximum traction force: 500 N. See page 22. Use online configurator when...

Double drive units XS Double drive unit, suspended Double drive unit, suspended A Double drive unit Fixed speed up to 60 m/min Transmission on left side A = 55 mm Fixed speed Without motor (ISO) Without motor (ANSI) A = 90–350 mm Without motor (ISO) Without motor (ANSI) XSEB DD XSEB 0 HLD55 XSEB 0 HLAD55 XSEB 0 HLD– XSEB 0 HLAD– Maximum traction force: 500 N. See page 22. Use online configurator when ordering. Effective track length: 0,80 m Double drive unit Fixed speed up to 60 m/min Transmission on right side A = 55 mm Fixed speed Without motor (ISO) Without motor (ANSI) A = 90–350 mm...

Wheel bends XS Wheel bend, 30° Effective track length: 0,25 m 1-way (0,50 m 2-way) Effective track length: 0,40 m 1-way (0,80 m 2-way) Effective track length: 0,30 m 1-way (0,60 m 2-way) Effective track length: 0,65 m 1-way (1,30 m 2-way) Plain bends XS Plain bend, 30° XSBP 30R500 XSBP 30R700 XSBP 30R1000 XSBP 45R500 XSBP 45R700 XSBP 45R1000

Plain bends XS (continued) Plain bend, 60° XSBP 60R500 XSBP 60R700 XSBP 60R1000 Effective track length: 0,20 m 1-way (0,40 m 2-way) Effective track length: 0,35 m 1-way (0,65 m 2-way) Effective track length: 0,22 m 1-way (0,44 m 2-way) Effective track length: 0,45 m 1-way (0,80 m 2-way)

Vertical bends XS (continued) Vertical bend, 60° Effective track length: 0,50 m 1-way (0,95 m 2-way) Effective track length: 0,70 m 1-way (1,30 m 2-way) The bend is cut in the middle to the desired angle and assembled using connecting strips. The angle “E” must be specified when ordering.

Front piece XS Front piece Bend support for front piece 30 Front piece Length 3 m Sliding strip for front piece Front piece lower bend Sliding strip for front piece Length 2 m The sliding strip must be anchored to the front piece. Rivets and tools for anchoring: see page 106. Front piece upper bend Includes connecting strip with screws Includes connecting strip with screws Linkage kit for front piece Kit includes two support pairs and one locking device.