Conveyor System X85
1 / 34ページ

System information Technical characteristics Features Suitable for a wide range of applications. Higher capacity than XS. Includes components for pallet handling (X85P) and vertical wedge conveyors. Examples of application areas Ball valves, water meters, disk drives, pie packages, plastic bottles, beverage cans, products on pallets, paint cans, socks. System information

Conveyor modules Straight conveyor Support modules – single and multi-lane L Support module – single lane * Conveyor module – straight * Support module – multi-lane * *Use online configurator when ordering * Use online configurator when ordering L1 Conveyor module – one bend * *Use online configurator when ordering L2 Conveyor module – two bends * *Use online configurator when ordering Conveyor modules

Chains - introduction Chain types The conveyor chain is designed for smooth running, min- imum wear and low noise level at normal speeds. Chain performance levels • For most applications: standard chain, available as plain chain, cleated chain, friction top chain, steel- plated chain, and roller top chain. • For special applications: ultra high wear resistance chain, steel top chain, high temperature chain, con- ductive chain, semi-conductive chain, smooth top chain, and wedge top chain. In pallet systems where pallets type BR or R are used, it is necessary to use the plain chain with...

Chains Plain chain Flat friction top chain 83 Plain chain Length 5 m Standard material Conductive material Ultra low wear Plain link kit * Standard material Conductive material Ultra low wear XBTP 5A85 XBTP 5A85 E XBTP 5A85 C Flat friction top chain Length 5 m * Link kit contains 10 links, 10 pivots, 10 steel pins *Link kit contains 10 links, 10 pivots, 10 steel pins Do not use this chain with pallets type BR or R. Steel top chain Length 5 m Steel top link kit * Closed top chain Length 5 m *Link kit contains 10 links, 10 pivots, 10 steel pins Top part has steel cover for improved wear...

Chains (continued) Flexible cleat chain, Type B 4 Roller top chain Length 5 m Use the online configurator to specify and order. Flexible cleat chain Type B Length 5 m Roller top chain Length 5 m * This product is delivered with plain links between the cleats. Flexible cleat link kit *Link kit contains 10 links, 10 pivots, 10 steel pins ** Link kit contains 10 links, 10 pivots, 10 steel pins Chain with 23 mm roller cleats Flexible cleat chain, Type C Ø 20 Chain with 23 mm roller cleats * Length 5 m XBTF 5A85×23 R * This product is delivered with plain links between the cleats. Use the online...

Chains (continued) Universal chain Universal chain* * This product is delivered with plain links between the universal links. Use the online configurator to specify The link has a hole for an M5 screw. An M5 nut will fit **Link kit contains 10 links, 10 pivots, 10 steel pins V-block chain V-block chain * Link kit contains 10 links, 10 pivots, 10 steel pins Steel link X85 (spare part, 10 pes) Including pins and pivots. 5058301 Entire top part is electro-zinc-plated hardened steel (700HV1). Bottom part is acetal resin. Rebuilding instructions are included see page 473. Modification kits are...

Accessories for use with steel chain 5056849 Rebuilding kit for end drive unit Rebuilding kit for End drive unit H Kit includes support rolls for guidance of chain under the drive unit. Rebuilding instructions are delivered with the chain. Note. Can only be used for chains without cleats or rollers. Rebuilding kit for direct drive Rebuilding kit for End drive unit H, direct drive 5058269 Kit includes support rolls for guidance of chain under the drive unit, and side plates for replacement. Rebuilding instructions are delivered with the chain. Accessories for use with steel chain 5056849

Conveyor beam – introduction Beam design Three slide rail profiles The X85 beams are designed for rigidness, smooth running, high speeds and low noise. Features include a flat top surface and heavy duty T-slots. The T-slots ensure easy but rigid attachment of accessories such as guide rail brackets. Slide rails are available in three profile designs: standard, wide, and wide with guidance. Type B XBCR 25 XBCR 25 H XBCR 25 P XBCR 25 E XBCR 25 U Cross-section of straight section conveyor beam with wide slide rails Cross-section of plain bend with narrow slide rails on the top and an extra...

Note. “Length 3 m” aluminium products are cut to 3030 mm ± 5 mm. Conveyor beam Beam section for chain installation X65 Beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Slide rail: see page 166. Beam accessories: see below. Including connection strips and screws Profile for split conveyor beam Beam clip assembly Beam clip assembly Profile for split conveyor beam Length 3 m (3030 ±5 mm) Length to order (30- 3000 mm) Including M8 screw and locking nut. Use minimum 5 clips per meter. Place clips 100 mm from each end. Note. Must be ordered in multiples of 10. Beam accessories Cover...

Slide rails Plastic slide rails, narrow Aluminium rivets for anchoring of slide rail Slide rail Length 25 m HDPE (Black) PA-PE (Grey) PVDF (Natural white) PE-UHMW (White) PE-UHMW conductive (Black) XBCR 25 XBCR 25 H XBCR 25 P XBCR 25 U XBCR 25 E Plastic slide rails, wide Aluminium rivets 4 mm for XKX180/X300 conveyors, brown Extra slide rail in plain bends must be anchored using plastic screws due to lack of space for the rivet crimping tool. Note. Must be ordered in multiples of 250. Plastic screws for anchoring of slide rail 2,5 Slide rail Length 25 m HDPE (Black) PA-PE (Grey) PVDF...

Slide rail in hardened steel Steel slide rail, straight Cover strip Slide rail, hardened steel Length 3 m Delivered with 9 predrilled holes Steel slide rail for wheel bends Cover strip Length: 3 m Material: Plastic PA 12 Slide rail for bends, hardened steel Slide rail for bend, 30° XBCR W30 TH Slide rail for bend, 45° XBCR W45 TH Slide rail for bend, 90° & 180° XBCR W90 TH 180°: Use 2 pieces of steel slide rail 90° Cover the opening on the side between the chain and beam. Primarily for straight sections and the outer curves, but can also be mounted on inner curves. Apply using Glue tape...