Serie 40
1 / 20ページ

40 SERIES PCB/Plug-in relays from 8 to 16 A Power relays 1 and 2 pole for direct PCB or socket mount Type 40.31 -- 1 CO 10 A (3.5 mm pin pitch) Type 40.51 -- 1 CO 10 A (5 mm pin pitch) Type 40.52 • DC coils (standard or sensitive) or AC coils • Cadmium-free contact material • 8 mm Creepage and Clearance, 6 kV (1.2/50µs) • 1 CO 10 A • 1 CO 10 A • 2 CO 8 A • 3.5 mm pin pitch • 5.0 mm pin pitch • 5.0 mm pin pitch • PCB or 95 Series socket mount • PCB or 95 Series socket mount • PCB or 95 Series socket mount between coil and contact • 95 series sockets for PCB or 35 mm rail mounting (EN 60715) with Screw, Screwless or Push-in terminals • Coil Indication and EMC suppression modules 99 series and Timer module 86.30 options • Environmental protection: RT II - flux proof (Standard) RT III - wash tight (Option) For UL ratings see: “General technical information” page V Copper side view Copper side view For outline drawing see page 10 Copper side view Contact specification Contact configuration Rated current/Maximum peak current Rated voltage/ Maximum switching voltage Single phase motor rating (230 V AC) Minimum switching load Standard contact material Coil specification Nominal voltage (UN) V DC Rated power AC/DC/sens. DC Operating range Holding voltage Must drop-out voltage Mechanical life Electrical life at rated load AC1 Technical data Operate/release time Insulation between coil and contacts (1.2/50 µs) Dielectric strength between open contacts Ambient temperature range Environmental protection

40 SERIES PCB/Plug-in relays from 8 to 16 A Power relays 1 and 2 pole for direct PCB or socket mount Type 40.61 A "1 CO 16 A (5.0 mm pin pitch) - DC coils (standard or sensitive) or AC coils Type 40.xx.6 - Bistable versions of the types 40.31,40.51, 40.52 and 40.61 - Bistable (single coil) DC or AC coils • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.2/50ps) between coil and contact • 95 series sockets for PCB or 35 mm rail mounting (EN 60715) with Screw, Screwless or Push-in terminals • Coil Indication and EMC suppression modules 99 series and Timer module...

40 SERIES PCB/Plug-in relays from 8 to 16 A Power relays 1 pole for direct PCB or socket mount • Pin length 3.5 mm for PCB mount • Pin length 5.3 mm for Plug-in mount • DC coils (650 mW or 500 mW) • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.2/50µs) between coil and contact • Meets EN 60335-1 glow wire requirements • 95 series sockets for PCB or 35 mm rail mounting (EN 60715) with Screw, Screwless or Push-in terminals • Coil Indication and EMC suppression modules 99 series and Timer module 86.30 options • Environmental protection: RT II - flux proof...

40 SERIES PCB/Plug-in relays from 8 to 16 A Type 40.11 - 1 CO 10 A - flat pack A • DC (sensitive) coils • Cadmium-free contact material available • 8 mm Creepage and Clearance, 6 kV (1.2/50ps) between coil and contact For UL ratings see: “General technical information" page V For outline drawing see page 10 Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/ Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching...

40 SERIES PCB/Plug-in relays from 8 to 16 A Ordering information Example: 40 series PCB relay, 2 CO, 230 V AC coil. A: Contact material See table below B: Contact circuit 0 = CO (nPDT) 3 = NO (nPST) Series Type- 1 = PCB - 3.5 mm pinning, flat 3 = PCB/Plug-in - 3.5 mm pinning 5 = PCB/Plug-in - 5 mm pinning 6 = PCB/Plug-in - 5 mm pinning No. of poles- D: Special versions 0 = Standard 1 = Wash tight (RT III) 3 = High temperature (+125 °C) wash tight C: Options 0 = Pin length 5.3 mm (Plug-in relays) 2 = Pin length 3.5 mm (PCB relays) Coil version- 6 = AC/DC bistable 7 = Sensitive DC, 0.5 W 8 =...

40 SERIES PCB/Plug-in relays from 8 to 16 A Technical data Insulation according to EN 61810-1

40 SERIES PCB/Plug-in relays from 8 to 16 A Contact specification F 40 - Electrical life (AC) v contact current Types 40.31/51/61 F 40 - Electrical life (AC) v contact current Types 40.52 limit for 40.31/51 **Inductive load - AC15 Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 * limit for 40.31, see page 3 ** Inductive load - AC15 for 40.31/61, see page 3 Resistive load - cosϕ = 1 Inductive load - cosϕ = 0.4 H 40 - Maximum DC1 breaking capacity 40.61 current limit 40.11/31/51 current limit 40.52 current limit F 40 - Electrical...

40 SERIES PCB/Plug-in relays from 8 to 16 A Coil specifications DC coil data - 0.65 W standard (types 40.31/51/52/61) DC coil data - 0.5 W sensitive (types 40.31/51/52/61) Nominal voltage Un Nominal voltage Un DC coil data - 0.5 W sensitive (types 40.11)

40 SERIES PCB/Plug-in relays from 8 to 16 A Contact specification R 40 - DC coil operating range v ambient temperature Standard coil R 40 - DC coil operating range v ambient temperature Sensitive coil, types 40.31/51/52/61 R 40 - DC coil operating range v ambient temperature Sensitive coil, type 40.11 R 40 - AC coil operating range v ambient temperature 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Wiring diagram for 40 series bistable coil version AC...

40 SERIES PCB/Plug-in relays from 8 to 16 A Outline drawings Type 40.31/51/52/61

95 SERIES Socket overview for 40 series relays

95 SERIES Socket and accessories for 40 series relays 95.P5 Approvals (according to type): cc © cw; RINA Push-in terminals socket panel or 35 mm rail mount * For currents > 10 A, contact terminals must be connected in parallel (21 with 11,24 with 14, 22 with 12). With the relay 40.51 the change-over contact will be 21-12-14. 2-way jumper link for 95.P3 and 95.P5 sockets