General catalog
1 / 587ページ

Automation Industrial applications Residential and Commercial

Overview Series Industrial and PCB relays (EMR/SSR) Relay interface modules (EMR/SSR) Interface modules Relays with forcibly guided contacts Power solid state relays (SSR) Monitoring relays Energy meters Surge Protection Devices (SPD) Switch mode power supplies Panel thermostats Filter fans Panel heaters Modular and plug-in timers Light dependent relays Time switches Electronic staircase timers Dimmers Movement detectors Electronic step relays Mechanical step relays Modular contactors and modular monostable relays Room thermostats General technical information

Printed circuit mount 2 A signal relay • 2 Pole changeover contacts Low level switching capability • Subminiature - industry standard DIL package • Sensitive DC coil - 200 mW • Wash tight: RT III • Cadmium Free contact material Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/ Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage...

30 SERIES Subminiature DIL relays 2 A Ordering information ■ Example: 30 series PCB relay, 2 CO (DPDT) - 2 A contacts, 12 V sensitive DC coil. A A B c d Technical data Insulation according to EN 61810-1

30 SERIES Subminiature DIL relays 2 A Contact specification F 30 - Electrical life (AC1) v contact current (125 V) Note: The rated current of 2 A corresponds to the limiting continuous current. Coil specifications DC coil data - 0.2 W sensitive Nominal voltage Coil code R 30 - DC coil operating range v ambient temperature Operating range Rated coil consumption 4.8 1 - Max. permitted coil voltage. 2 - Min. pick-up voltage with coil at ambient temperature. Please see general technical informatio

Printed circuit mount 6 A relay • 1 Pole changeover contacts or 1 Pole normally open contact • Subminiature, low profile package • Sensitive DC coil - 200 mW • Wash tight: RT III • Cadmium Free contacts Contact specification Contact configuration Rated current/Maximum peak current A Rated voltage/ Maximum switching voltage V AC Rated load AC1 VA Rated load AC15 (230 V AC) VA Single phase motor rating (230 V AC) kW Breaking capacity DC1: 30/110/220 V A Minimum switching load mW (V/mA) Standard contact material Coil specification Nominal voltage (UN) V AC (50/60 Hz) V...

32 SERIES Subminiature PCB relays 6 A Ordering information ■ Example: 32 series PCB, 1 NO (SPDT-NO) - 6 A contacts, 24 V sensitive DC coil. A A B c d Selecting features and options: only combinations in the same row are possible. Preferred selections for best availability are shown in bold.

32 SERIES Subminiature PCB relays 6 A Contact specificationF 32 - Electrical life (AC) v contact current (A) H 32 - Maximum DC1 breaking capacity • When switching a resistive load (DC1) having voltage and current values under the curve, an electrical life of > 50 • 103 can be expected. • In the case of DC13 loads, the connection of a diode in parallel with the load will permit a similar electrical life as for a DC1 load. Note: the release time for the load will be increased. Coil specificationsDC coil data - 0.2 W sensitive R 32 - DC coil operating range v ambient temperature X-2017,...

34 SERIES Slim electromechanical PCB relays 6 A Ultra-slim 1 Pole - 6 A relay Printed circuit mount - irect or via PCB socket d 35 mm rail mount - ia screw, screwless or push-in terminal v sockets • 1 Pole changeover contacts or • 5 mm wide • Low coil power • PCB or 93 series sockets • 5 mm wide • Low coil power • PCB or 93 series sockets • Contact AgNi + Au Copper side view Copper side view 1 Pole normally open contact • Ultra slim (5 mm), package • Sensitive DC coil - 170 mW (Dual AC/DC coil drive possible using 93 series sockets) • UL Listing (certain relay/socket combinations) • Cadmium...

34 SERIES Slim solid state PCB relays (SSR) 0.1 - 6 A finder Ultra-slim Solid State Relays Printed circuit mount - direct or via PCB socket A 35 mm rail mount - via screw, screwless or push-in terminal sockets • Single circuit output switching options - 6 A, 24 V DC - 2 A, 240 V AC • Silent, high speed switching with long electrical life • Ultra slim (5 mm), package • Sensitive DC Input circuits (Dual AC/DC input drive possible using 93 series sockets) • UL Listing (certain relay/socket combinations) • Wash tight: RT III • 3000 V AC insulation, input-output * 6 A, 24 V DC output switching...

34 SERIES Slim solid state PCB relays (SSR) 0.1 - 6 A Ultra-slim Solid State Relays Printed circuit mount - direct or via PCB socket 35 mm rail mount - via screw, screwless or push-in terminal sockets • Single circuit output switching options - 0.1 A, 48 V DC - 0.2 A, 220 V DC 34.81.7.xxx.7048 • Silent, high speed switching with long electrical life • Ultra slim (5 mm), package • Sensitive DC Input circuits (Dual AC/DC input drive possible using 93 series sockets) • UL Listing (certain relay/socket combinations) • Wash tight: RT III • 3000 V AC insulation, input-output For outline drawing...

34 SERIES Ultra-Slim PCB relays Ordering information Electromechanical relay (EMR) Example: 4 series slim electromechanical relay, 1 CO (SPDT) 6 A contacts, 24 V sensitive DC coil. 3 A A: Contact material 0 = tandard AgNi S 4 = gSnO2 A 5 = AgNi + Au Type 5 = lectromechanical type E No. of poles 1 = pole, 6 A 1 D: Special versions 0 = lux proof (RT II) F 9 = lat version F C: Options 1 = one N B: Contact circuit 0 = CO (SPDT) Coil version 7 = ensitive DC S Coil voltage See coil specifications Selecting features and options: only combinations in the same row are possible. Preferred selections...