カタログ >
FIBRO GmbH >
PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER
1 / 12ページ

お気に入りに追加する　

カタログの抜粋

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 1

USER GUIDE FOR FIBRO CAM UNIT ADAPTER MEMBER OF THE LÄPPLE GROUP

カタログの1ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 2

CAM UNIT ADAPTER PROCEDURE FOR USE

カタログの2ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 3

THE MODEL STRUCTURE OF OUR CAM UNIT ADAPTER CORRESPONDS TO THE SPECIFICATIONS OF THE CAD GUIDE. THE INTEGRATION INTO THE TOOL DESIGN IS, THEREFORE, POSSIBLE WITH THE DIFFERENT INTEGRATION METHODS OF THE OEMS. IN ADDITION TO THE CAM UNIT GEOMETRY AND THE CAM UNIT CONNECTION GEOMETRY (CASTING, MILLING, AND DRILLING OPERATIONS), THIS CAD MODEL ALSO PROVIDES THE PARTS LIST INFORMATION AND CAN BE TRANSFERRED TO THE TOOL STRUCTURE. POSITION CORRECTIONS AND ADJUSTMENTS TO THE CONNECTION GEOMETRY ARE POSSIBLE VIA VARIOUS PARAMETERS. OUR CAM UNIT MODEL SERVES AS A STANDARDIZED INTEGRATION INTERFACE...

カタログの3ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 4

CAM UNIT ADAPTER PROCEDURE FOR USE SELECT THE CAM UNIT AND ADAPTER MODEL ON OUR HOMEPAGE IN THE "CAD DOWNLOAD AREA". Here you can conveniently compile the cam units you need using a selection matrix and download them individually or several different cam units at once. The adapter model is listed in the selection matrix for each width, but can be used universally for all our cam units. Therefore, it only needs to be downloaded once.

カタログの4ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 5

OUR "CAM UNIT SELECTION WIZARD" HELPS YOU FIND THE RIGHT CAM UNIT FOR YOUR APPLICATION. Direct link to the respective CAD model as well as to the technical data of the cam unit We recommend saving the downloaded CAD models locally in the tool project. Registration or login is not required to download our cam unit data.

カタログの5ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 6

CAM UNIT ADAPTER PROCEDURE FOR USE OUR ADAPTER MODEL IS LINKED TO A PLACEHOLDER GEOMETRY DURING DOWNLOAD. TO CONNECT IT TO THE CAM UNIT YOU NEED, OPEN THE ADAPTER MODEL. You can use the CATIA edit/link command to call the "Replace" command in the "Pointed documents" tab and link it to the cam unit geometry you need using the file-selection dialog.

カタログの6ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 7

If you are using a 2016.25 (upper cam unit > 700 mm) or 2016.15 (lower cam unit) series cam unit, we recommend that you open the upstream model first and configure the desired settings here before integrating it into the tool. The models of the 2016.15 series are fully configurable and can be adjusted in terms of angle, width derivative, and the type of centering in the tool. The models of the 2016.25 series are partially configurable and can be adapted in terms of width derivative, in the design of the working surface with or without offset, as well as in the type of pre-acceleration. The...

カタログの7ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 9

CAM UNIT ADAPTER PROCEDURE FOR USE BEFORE INTEGRATING THE CAM UNIT INTO THE TOOL DESIGN, THE REQUIRED REFERENCE GEOMETRY FOR POSITIONING THE CAM UNITS MUST BE AVAILABLE. This reference geometry may differ depending on the specified design methodology and must, therefore, be incorporated in accordance with the specifications of the respective OEM. The integration of the cam unit geometry into the tool structure is done using the corresponding OEM method. For example, macros provided by OEMs for standard part integration can be used for this purpose. In the FIBRO cam unit adapter model, the...

カタログの9ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 10

CUSTOMER-SPECIFIC SERVICES CUSTOMER-SPECIFIC CAM UNITS DISCOVER OUR CUSTOMER-SPECIFIC CAM UNITS All the advantages of standard purchase cam units in combination with your application-specific requirements

カタログの10ページ目を開く

PDF USER GUIDE FOR FIBRO CAM UNIT ADAPTER - 11

YOUR POINTS OF CONTACT CONCERNING CAM UNITS Markus Meyer Roberto Inchingoli Head of Cam Unit Applications Key Account Manager Cam Unit Applications Georg Schreck Manfred Wagner Product Manager Cam Unit Applications Senior Key Account Manager Cam Unit Applications Markus Steinhilber Key Account Manager Cam Unit Applications m.steinhilber@fibro.de +49 (151) 64975857

カタログの11ページ目を開く