カタログ >
FAULHABER Drive Systems >
Motion Control System : 2232 ... BX4 IMC RS/CO

Motion Control System : 2232 ... BX4 IMC RS/CO
1 / 2ページ

カタログの抜粋

Motion Control System : 2232 ... BX4 IMC RS/CO - 1

flgfl Motion Control Systems V3.0, 4-Quadrant PWM with RS232 or CANopen interface Note: The display shows the range of possible operation points of the drives at a given ambient temperature of 22°C. The diagram indicates the recommended speed in relation to the available torque at the output shaft. It includes the assembly on a plastic- as well as on a metal flange (assembly method: IM B 5). The nominal voltage linear slope describes the maximal achievable operating points at nominal voltage. Any points of operation above this linear slope will require a supply voltage UMot> Un. For notes on technical data and lifetime performance © DR. FRITZ FAULHABER GMBH & CO. KG refer to “Technical Information". Specifications subject to change without notice.

カタログの1ページ目を開く

Motion Control System : 2232 ... BX4 IMC RS/CO - 2

FAULHABER Dimensional drawing Option, cable and connection information Example product designation: 2232S024BX4 IMC CO 7431 Type Connector Description AWG 26 / PVC ribbon cable with connector MOLEX Microfit 3.0, 43025-0800, recommended mating connector 43020-0800 Common voltage supply for motor and electronics AnInI ±10V (without DigOut2) Connection Standard Option: 7431 Standard cable PVC ribbon cable 8 x AWG 26, 1,27 mm Note: For details on the connection assignment, see device manual IMC. Product combination Precision Gearheads / Lead Screws Drive Electronics Cables / Accessories To view...

カタログの2ページ目を開く