GFSO
1 / 20ページ

INTRODUCTION Thanks to many years of in-field experience regarding research, design and production of oil filters and oil separation for compressors applications, the high quality standard reached by FAI FILTRI has made it possible for the company to design and manufacture integrated groups equipped with oil filters and oil separators, thermostats and minimum pressure valves, suitable for assembly on rotary and screw compressors, which also allow a more and more accurate air cleaning in order to make it suitable for several industrial application such as: food industry, electronic,...

FILTERING ELEMENTS 5 bar collapse differential pressure tested in accordance with: Axial strain strength tested in accordance with Manufacturing compliance and first bubble point determination tested in accordance with : SEPARATION EFFICIENCY Oil residual in relation to speed and temperature Oil residual [mg/Nm3] Olio residuo [mg/Nm3] By avoiding overcoming suggested nominal flow rates it is possible to reach a residual oil waste lower than 13 ppm 5,0 4,0 Velocità flusso [m/sec] OPERATING TEMPERATURES FLOW RATES Air/oil separation filter: With an operating pressure up to 7 bars from 1 to...

The compressed air flux polluted by solid particles and micro drops of oil passes through the first layer of borosilicate micro fibers . At this stage micro drops, smaller than 1 micron , are agglomerated to form bigger drops according to the coalescence principle and are therefore collected and drained by the second layer of porous and synthetic material and end up, due to gravity, on the dry side of the separator. Setting: 4,5 bar The minimum pressure valve is assembled on the GSO integrated group on the air/oil separator side or on the GS group. This valve has to stop the...

Thermostat operative temperature: See table for choosing the operative setting The thermostat is assembled on the GO / GSO integrated group on the oil filter side. When set up temperature is reached the oil flux is diverted for cooling by the radiator. PRESSURE DROP Air/oil separation filter With nominal flow rate and 7 bars pressure the head pressure drop with a clean filter is up to 0,2 bars. Oil filter Curves are valid for mineral oil with kinematic viscosity up to 30 mm2/sec. (cSt). The P varies alongside the kinematic viscosity in accordance with the following formulas: Kinematic...

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 10 Air flow rate: 1 m³/min Oil flow rate: up to 25 l/min Choice of oil filter integrated group – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 10 Clogging indicator Filtration type oil filter Without Visual diff. indicator Electric diff. indicator Separator filter Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of...

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT012 oil filter and DSP012.0 separator filter Ø76 AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT025 oil filter and DSP012.0 separator filter Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 15 Air flow rate: 1.5 m³/min Oil flow rate: up to 50 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 15 Clogging indicator Separator filter Filtration type Oil filter Visual diff. indicator Electric diff. indicator Clogging indicator: Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of reinforced polyester

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT050oil filter DSP050.0 and separator filter Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 20 Air flow rate: 2 m³/min Oil flow rate: up to 70 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 20 Clogging indicator Filtration type Oil filter Without Visual diff. indicator Electric diff. indicator Separator filter Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of...

AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT050 oil filter and DSP070.0 separator filter Dimensions integrated group equipped with CTT070 oil filter and DSP070.0 separator filter AIR/OIL SEPARATOR Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)

Air oil integrated group equipped with thermostat and minimum pressure valve Model: GFSO 55 Air flow rate: fino a 5.5 m³/min Oil flow rate: up to 70 l/min Choice of integrated group oil filter – air/oil separator filter equipped with thermostat and minimum pressure valve GFSO 55 Clogging indicator Separator filter Filtration type Oil filter Visual diff. indicator Electric diff. indicator Clogging indicator: For oil group setting: 1.5 bar Oil filter filtering baffles legend: P10 – P25: Cellulose fibers impregnated with phenolic resins, 10 and 25µ A10 – A16 – A25: Multilayer baffle made of...

Dimensions integrated group equipped with CTT070 oil filter and DSP300.0 separator filter AIR/OIL SEPARATOR Dimensions integrated group equipped with CTT070 oil filter and DSP400.0 separator filter AIR/OIL SEPARATOR Oil filter pressure drop Curves are valid for mineral oil with viscosity up to 30 mm²/sec (cSt) (For oil filter viscosity variations see page 5)