O²-PID
1 / 4ページ

カタログの抜粋

Overfill Prevention and Product Identification for fuel drop at petrol stations Sensors & Systems Worldwide: www.fafnir.com

カタログの1ページ目を開く

O1-PID Overfill Prevention & Product Identification Benefits of the overfill and cross over prevention system with O1-PID Application The O1-PID System is a safety device to prevent the overfilling of storage and bunker tanks when filled with petrol, diesel or fuel oil. The system consists of an optical liquid detector with product identification (O2-PID) ■ Much easier handling of the fuel drop ■ No extra cable at the road tanker is needed for the overfill prevention ■ The connection to the O1-PID detector is realized by electrically conductive hoses in the storage tank and an evaluation...

カタログの2ページ目を開く

The connection couplings of the hoses are electrically isolated. Therefore it is possible to supply the O2-PID fluid detector with an intrinsic safe current and to read its measured values. The status of the detector is interrogated 10 times per second. If a liquid touches the optical prism of the O2-PID detector, the status of the detector changes and a corresponding signal is transmitted to the road tanker electronics (PRD). Every evaluation in accordance with EN 14116 can read the PID and overfill information! The System There are three important tasks that are served by the new O2-PID ■...

カタログの3ページ目を開く

Probe length FAFNIR Technical Data of O2-PID Operating data » Temperature range: -40 °C to +60 °C » Pressure range: 0,1 MPa Optical detection principle » Prism: Polysulfon Materials » Wetted parts: Stainless steel 1.4301 (304); Brass; Viton; Polysulfon Dimensions » Diameter of sensor tube: 16 mm » Length: 600 mm » Screw-in unit G 1 » Cable connection: 2 m of two wire lead Approvals » Overfill prevention device EN 13616 » Communication of PID: EN 14116 » ATEX: II 1 G Ex ia IIB T4 Ga Threshold point FAFNIR GmbH Schnackenburgallee 149 c 22525 Hamburg, Germany Phone: +49/40/39 82 07-0 E-Mail:...

カタログの4ページ目を開く