

カタログの抜粋

SM SERIES | LVDT Inductive Position Transducer: Standard series that fits nearly all industrial and laboratory applications, highly customisable. ■ High precision and linearity ■ Various configuration options ■ Push-rod guided and unguided, spring loaded ■ Stainless steel housing ■ Linearity up to 0,10 % ■ Measuring range 2
カタログの1ページ目を開く
LVDTs (Linear Variable Differential Transformers) are inductive sensors excellent for use in harsh industrial environments, e.g. high temperature and pressure ranges, as well as high accelerations and measuring cycles. The SM series offers ultimate reliability and precision in a small size, and is designed for industrial and lab use. With a measuring range from 2 up to 200 mm and various configuration options (mechanics, protection class, temperature range, linearity) the SM series ensures to have a suitable measuring system for every application. The IMCA and KAB electronics (explanation...
カタログの2ページ目を開く
SM SERIES | TECHNICAL DIMENSIONS TECHNICAL DIMENSIONS RANGE (FS) [MM] BODY LENGTH B RADIAL CABLE / CONNECTOR [MM] BODY LENGTH C CONNECTOR M12 [MM] Other measurement ranges are available on request. ■ TYPE: FREE CORE (D), PUSH ROD UNGUIDED (E) Free Core (D): Delivery: core (the core extension made of non-magnetic material must be added by the customer). Push rod unguided (E): delivery: core + core extension ■ TYPE: PUSH ROD GUIDED ■ TYPE: SPRING LOADED (UP TO RANGE 0...100 MM) Please note that the stated end travel and start travel (see detailed picture) are standard values. When calibrating...
カタログの3ページ目を開く
4 SENSOR TYPES | SM SERIES SENSOR TYPES ■ CONNECTOR / CABLE OUTPUT AXIAL / RADIAL Sensors with cable output have a cable fitting and a spring for bend protection of the cable. For installation, the bending radius should not be less than 3 times the cable diameter. The standard cable length is 2 m. Instruments with option H for temperatures up to 150 °C/ 200°C feature a PTFE cable. For normal application the sensors have a closed rear end body. Sensors that feature a radial cable output can be supplied with a through hole on request. Please use this version for applications at heavy dirt...
カタログの4ページ目を開く
CABLE ELECTRONICS KAB FUNCTION CABLE PTFE-UL If not specified otherwise the cable electronics is placed at 1 m from the end of the cable. EXTERNAL ELECTRONICS IMCA external electronics IMCA (for DIN-rail mounting) The external electronics IMCA is designed to be installed in switch cabinets (Din-rail mounting). The connection to the sensor is conducted as connector with push-in spring connection. * * Terminals 1 and 7 are internally connected. ADJUSTMENT OF ZERO POINT AND GAIN Each sensor, manufacted by eddylab, is basically adjusted and calibrated. You will receive a traceable calibrated...
カタログの5ページ目を開く
CABLE BREAK DETECTION The electronics by eddylab feature a built-in cable break detection. This is achieved by an impedance measurement of the LVDT´s secondary coil. If the sensor cable is cut, the impedance on the secondary connections of the electronics change regardless of the push rod position, triggering the cable break detection. This feature is based on a broken secondary connection. A partial cable break of the primary connections (cables between primary coil and electronics) will not activate this function. The electronics vary in their functional range. The external electronics...
カタログの6ページ目を開く
■ CONNECTION CABLE (SHIELDED) FOR CONNECTOR OUTPUT CABLE M12 ANGULAR CONNECTOR CABLE M12 WITH STRAIGHT CONNECTOR ■ MATING CONNECTOR M12 FOR SELF ASSEMBLY (SHIELDED) STRAIGHT CONNECTOR D4-G-M12-S Protection class Temperature range spring closure construction Cable diameter 0,14...0,34 mm² Good chemical and oil resistance ■ FEELER FOR SPRING LOADED VERSION MATERIAL OF TASTKOPF-01 FEELER BALLS steel: for standard applications ruby: much harder and wear resistant than steel, non-conductive, for all applications except for measuring on aluminium and cast iron ceramics: comparable to ruby, best...
カタログの7ページ目を開く
8 ORDER CODE | SM SERIES ORDER CODE SENSOR SM d cable / connector output S1: sensor with connector output b type A = free core connector output M12 (no cable) temperature range S2: sensor with cable output, open cable end (for IMCA) D = PTFE-UL cable 2 m (option H) 3 = wiper ring (option W) E = PTFE-UL cable 5 m (option H) F = PTFE-UL cable 10 m (option H) axial cable output KR = radial cable output S3: sensor with cable output for KAB SA = axial connector output M12 SR = radial connector output M12 K = PTFE-UL cable 2 m (option H) L = PTFE-UL cable 5 m (option H) M = PTFE-UL cable 10 m...
カタログの8ページ目を開くEddylab GmbHのすべてのカタログと技術パンフレット
-
Product Overview
16 ページ
-
Inductive sensor SM
8 ページ
-
AX Series
8 ページ
-
MAGNESCALE
11 ページ
-
SM-HYD
8 ページ
-
Serie REX-D
8 ページ
-
DIGITAL DISPLAY
6 ページ
-
SM-F14 SERIES
8 ページ
-
SM-F18 SERIES
8 ページ
-
SM-F18
8 ページ
-
Inductive sensor SL
8 ページ
-
Inductive Sensor SLT
8 ページ
-
DT series DMAGNESCALE
13 ページ
-
PL101 - Magnescale ®
8 ページ
-
MB-LK, MB-LKM ®
6 ページ
-
SR-series Magnescale ®
16 ページ
-
REX-Series
8 ページ
-
PMX-24
4 ページ
-
PAXI
6 ページ
-
PAX P, DP
6 ページ
-
LG20 - Magnescale ®
4 ページ
-
GB-ER - Magnescale ®
6 ページ