カタログ >
DSTI - Dynamic Sealing Technologies >
Slip Ring Protective Enclosure (SRPE)

Slip Ring Protective Enclosure (SRPE)
1 / 4ページ

カタログの抜粋

Slip Ring Protective Enclosure (SRPE) - 1

DESIGN FEATURES & SPECIFICATIONS Enhance protection with a waterproof and dustproof sealed slip ring enclosure. DSTI offers a wide range of slip rings for transferring electrical signals, power or data from a fixed structure to a rotating piece of equipment. To mitigate slip ring damage when used in harsh environments, DSTI offers an all-aluminum enclosure for enhanced protection against water and dust ingress. The SRPE features a low-torque design, a flange located on the shaft for improved mounting capabilities and NPT connections for installing electrical conduit. SPRAY & SPLASH PROTECTION DUST & DIRT PROTECTION IN-STOCK & READY TO SHIP *Not compatible with ES6A or ES12A slip rings. Slip rings are sold separately. Dynamic Sealing Technologies, Inc. | main +1 763-404-8000 | web www.dsti.com | shop store.dsti.com

カタログの1ページ目を開く

Slip Ring Protective Enclosure (SRPE) - 2

amic Sealing Technologies, Inc. | main SPECIFICATIONS www.dsti.com | shop store.dsti.com DESIGN FEATURES & +1 763-404-8000 | web Slip Ring Protective Enclosure (SRPE) H F INSTALLATION INSTRUCTIONS 1. Carefully unpackage the slip ring (D) and check for any shipping damage. A O-ring for Flush Mounting to Shaft 2. Install the slip ring into the bore of the shaft by carefully pulling the wire leads from the capsule side of the slip ring through the shaft (B). The opposite wire leads can be pulled through the 1/2” NPT passage on the housing (C). 3. Align the slip ring with the holes on the shaft...

カタログの2ページ目を開く

Slip Ring Protective Enclosure (SRPE) - 3

amic Sealing Technologies, Inc. | main SPECIFICATIONS www.dsti.com | shop store.dsti.com DESIGN FEATURES & +1 763-404-8000 | web Slip Ring Protective Enclosure (SRPE) INSTALLATION INSTRUCTIONS (CONTINUED) 1/2” NPT Connections The protective enclosure includes threaded connections on both ends for installing electrical conduit as added protection against dust and water. Conduit fittings not included Shaft Mounting Flange The shaft on the protective enclosure includes four slotted holes for quick and easy mounting. An o-ring face seal is included for additional protection against dust and...

カタログの3ページ目を開く

Slip Ring Protective Enclosure (SRPE) - 4

amic Sealing Technologies, Inc. | main SPECIFICATIONS www.dsti.com | shop store.dsti.com DESIGN FEATURES & +1 763-404-8000 | web Slip Ring Protective Enclosure (SRPE) 4.99 1.85 2.42 1.250 OD .052 O-RING GLAND FOR OPTIONAL FACE SEAL CONNECTION Dynamic Sealing Technologies, Inc. | main +1 763-404-8000 | web www.dsti.com | shop store.dsti.com

カタログの4ページ目を開く