Pneumatically actuated high current bolt contacts and switching units, ”System druseidt”
1 / 12ページ

Flexible connectors • Solderless terminals • Contact-systems Pneumatically actuated high current bolt contacts and switching units, ”System drusei

Pneumatically actuated high current bolt contacts and switching units E-Mail: info@druseidt.de The measurements and technical information written in this catalogue have been determined with greatest care and are updated continuously in our documentation. The illustrations correspond to the status at the time of printing. We reserve us The use of photos, drawings or other parts of this catalogue for own advertisement or other usage is subject to our formerly written acceptance. the right to make technical as well as changes of measurements, colours or formats after printing. Our information,...

Druseidt Elektrotechnik Competence and quality in the field of high current transmission for over 100 years - Made in Germany Contact systems from druseidt stand for quality and innovative solutions. They are manufactured using modern machines and manufacturing processes. Even customer- or plant individual solutions are no problem for us.

Pneumatically actuated high current bolt contacts and switching units Pneumatically actuated high current bolt contacts and switching units “system druseidt“ – a perfect system for perfect applications Theoretical basics of electrical contact resistance The quality of an electrical connection depends on the material, the cross-section, the dimension and the finishing of the contact areas as well as on the contact pressure. Such facts define the electrical contact resistance and finally the operating and life time of the connection/contact. So when working with a higher contact pressure the...

Druseidt Elektrotechnik druseidt contact systems Minimized contact resistance due to extremely high contact pressure Pneumatically actuated high current bolt-contacts for applications inside of electroplating - or anodizing plants Pneumatically actuated, current-/voltage free switching units for various kinds of applications in the field of electrical engineering and power transmission

Pneumatically actuated high current bolt contacts and switching units Pneumatically actuated high current bolt contacts 800 A - 6000 A preferably for use inside of electroplating- and anodizing plants Modular designed contact system in which the current is transferred from the contact to the goods-carrier via silver plated copper bolts by means of a Beryllium-lamella. The electrical contact is realized by extending the contact bolts when pressurized. The opening of the contact also takes place by applying compressed air via a second compressed air circuit. The contact bolts are housed in a...

Druseidt Elektrotechnik Druseidt Elektrotechnik Pneumatically actuated high current bolt contacts 800 A - 6000 A preferably for use inside of electroplating- and anodizing plants _00_ Remark: The listed dimensions for contacts 1500 A are for busbar thickness 10 mm, for 3000 A for 15 mm and up 4500 A for 20 mm. The standard base plate can be used, up to a busbar thickness of 100 mm, by moving the contact halves without dimension changes. Of course the base plate can be dimensionally changed or replaced by an angle. Due to the modular design also contact units for higher current e.g. 9000...

Pneumatically actuated high current bolt contacts and switching units Pneumatically actuated, current-/voltage free switching units 1500 A - 6000 A for various kinds of applications in the field of electrical engineering and power transmission The construction is designed similar to our pneumatically actuated bolt contacts for application inside of electroplatingor anodizing plants. However, this new contact system takes account of the requirement that the for the current transfer required contact pressure must be maintained permanently also in the event of a failure or interruption of the...

Druseidt Elektrotechnik Druseidt Elektrotechnik Remark: The listed dimensions for contacts 1500 A are for busbar thickness 10 mm, for 3000 A for 15 mm and up 4500 A for 20 mm. The standard base plate can be used, up to a busbar thickness of 100 mm, by moving the contact halves without dimension changes. Of course the base plate can be dimensionally changed or replaced by an angle. Due to the modular design also contact units for higher current e.g. 9000 A/12000 A etc. can be produced.

Pneumatically actuated high current bolt contacts and switching units Cleaning-saddles for busbars and product-carriers In order to be able to integrate a continuous cleaning of the contact surfaces of the product-carriers in the fully automatic plant processes, the druseidt cleaning saddles were developed. They consist out of spring-mounted contact fingers which are provided with our special cleaning-fleece. This special material cleans the contact surfaces of the product-carriers by running-in and out. The fleece has a high chemical resistance and could be cleaned by using a compressed...

Druseidt Elektrotechnik Druseidt Elektrotechnik Remark: The dimensions listed in the tables are based on a busbar thickness of 20 mm. In case of deviating busbar thicknesses, the width dimensions change accordingly. In addition to the standard designs we deliver also versions according to your wishes e.g. for other contact surface lengths.

Paul Druseidt Elektrotechnische Spezialfabrik GmbH & Co. KG P.O. Box: 10 02 25 42802 Remscheid Germany Gate I: Neuenkamper StraBe 105 Gate II: Lenneper StraBe 131 Gate III: Karl-Kahlhofer-StraBe 9 42855 Remscheid Germany IPhone: Fax: http: E-Mail: Please order also our detailed catalogues to the following subjects: Flexible air and watercooled connectors and cables for Hi-Tech-applications Main catalogue for contact systems and accessories for electroplating and anodizing equipments