lubriLine Technical Data, Options and Accessoires
1 / 17ページ

lubriLine TECHNICAL DATA, OPTIONS AND ACCESSORIES

Products for every process step This symbol is clickable. Online you will find operating manuals, technical data, STEP files and much more for each product.

Transfer pumps for direct supply from original containers Technical data FP300 Basic version Comment: The container change can be facilitated with an optional pneumatic cylinder.

DOPAG • LUBRILINE DOPAG • LUBRILINE • 07 lubriLine Modules and options 1-hand control Reduction of drive pressure for pressure-sensitive materials (3/35/4/4.5/5/6 bar) Basic module Control unit Technical specifications Drive pressure limit Basic version Tandem Follower plate Drum change support Level alarm External communication Material relaxation Connection block Manual Follower plateVia ball valve deairing Chop check grease pump: For lubricants from NLGI0 to NLGI4 U-profile Pump can be moved with a pallet truck Drum roll-in mechanism Helps roll up the 200-litre drum PUR double-lip seal...

DOPAG • LUBRILINE 09 Material pressure regulator with piston Technical data Technical data ' Valve seat and valve ball out of tungsten carbide Heating Safety cap Pressure gauge 0-25 bar 1005441 Pressure gauge 0-60 bar Pressure gauge 0-160 bar Pressure gauge 0-400 bar 135903 135905 135907 Mounting brackets (max. one pressure gauge) 1006834

DOPAG • LUBRILINE • 11 Material pressure regulator with diaphragm Needle metering valves Technical data Technical data (Micro-metering valve) Pressure gauge 0-25 bar Pressure gauge 0-60 bar Pressure gauge 0-160 bar Pressure gauge 0-400 bar 1005440 135902 135904 135906 Pressure gauge 0-25 bar Pressure gauge 0-60 bar Pressure gauge 0-160 bar Pressure gauge 0-400 bar 1005441 135903 135905 135907

13 Needle metering valves ^ Technical data (for 450 series) Accessories Article no. Spray adaptor Spray adaptor 0 1.0 Micro-flow sensor 1013259 Solenoid valve for spray air Valve heating Air maintenance unit Different nozzle extensions and air caps available for spray adaptor Nozzle extensions Air caps Accessories Handle Solenoid valve plate 401.03.50 Handle pneumatic Solenoid valve plate with plug 3 pin M8x1 Div. air caps flat spray (spray cone 45°/60°/90°) 401.03.60 Handle electric with switch Solenoid valve plate 1010907 with throttle check valve with plug 3 pin M8x1 Outlet adapter...

DOPAG • LUBRILINE Chamber metering valves Technical data Accessories Handle Outlet adapter Article no. Metering volume per shot Handle electric with switch (for ID3) Hollow needle connection G1/8 Handle electric with initiator (for ID3) Handle pneumatic 4010114 ("foir ID8) Handle electric with switch (for ID8) Handle electric with initiator (for ID8) Hollow needle connection G1/4 Spray adaptor 1027640 Spray adaptor 0 1.0 1013259 Solenoid valve for spray air Solenoid valve plate Stroke detection Air caps 450.10.03 Solenoid valve plate with industrial plug form CI (for ID3) Different nozzle...

Dispensing valves mg Technical data Accessories Stroke detection Inlet adapter Article no. Description Electronic signal transmitter with plug M8x1 and cable 5m Electronic signal transmitter with plug M8x1 Valve plug M8x1 with 10m cable Outlet adapter Accessories Handle Solenoid valve plate 500.00.31 Solenoid valve plate with CI plug (for ID1) Sleeve nut with O-ring iG1/2 aG1/2 60° (for LW6) Handle electric with switch (for ID1) Solenoid valve plate with plug M8x1 (for ID2.5) Handle electric with initiator (for ID1) Solenoid valve plate with plug M8x1 (for ID6/12) Valve plug CI with 10 m...

Progressive cavity pumps Technical data Accessories Cartridge supply Spray adaptor 1023641 Cartridge supply right 30cc eGi/8 1013259 Solenoid valve for spray air Cartridge supply right 55cc eG1/8 Level control cartridge 10cc Different nozzle extensions and air caps available for spray adaptor Nozzle extensions 1026027 Level control cartridge 30cc / 55cc Ball valve iG1/4 with pressure regulator 0.1-7bar i04 3/2-solenoid valve iG1/8 with pressure regulator 0.1-7bar i04 Depending on material properties, nozzle size, alignment of PCP etc Luer Lock nozzles Drive kit Wide range of Luer Lock...

Shot valves SHV-01 Technical data Accessories Heating 1023453 Heating Nozzle extensions (for SHV-02 as well) 29.01.289 Connection cable shielded 10m M12 4-pole straight Article no. Stroke detection Shot valve Light barrier Light barrier 45° Further extensions on request

DOPAG • LUBRILINE Spray valves SPV-01 incl. solenoid valve Spray valves SPV-04 B39 Technical data Technical data Technical data

Spray valves SPV-02 Spray guns SPP-01 Kf Technical data Technical data Nozzle extensions Wide range of different nozzle extensions on request Nozzle extensions Wide range of different nozzle extensions on request Air maintenance unit with precision pressure regulator Air caps Div. air caps round spray (spray cone 15°) Div. air caps flat spray (spray cone 45°/60°/90°) Solenoid valve Heating 5/2-way fast switching solenoid valve Connection cable 10m M12 4-pole straight

Type code Type of shot valve SHV0-01 Nominal size of the centrifuge Light barrier Technical data Stroke detection Maximal immersion depth Hand spray valve VSP-01 H O: without heating H: with heating 50 W 24 V O: without light barrier for shot detection L: with light barrier for shot detection Nozzle size Material inlet pressure max. O: without silencer kit S: with silencer kit O: without stroke detection S: with stroke detection 02: Shot valve SHV-01 with nozzle Ø 0.2 mm 03: Shot valve SHV-01 with nozzle Ø 0.3 mm 05: Shot valve SHV-01 with nozzle Ø 0.5 mm 10: Shot valve SHV-01 with nozzle Ø...

Gear flow meter Type code Sensor type Gear wheel coating Nominal size Connecting Cable shielded 5 m Connecting cable shielded 10 m M12 4-pin straight Connecting cable shielded 10m M12 4-pole angle Mounting plate with heating 200W 230V PT100 Connecting cable shielded 20m M12 4-pole straight Connecting cable shielded 20m M12 4-pole angle A: AMR F: FPM T: PTFE E: EPDM N: Normal tolerance I: Increased tolerance D: Decreased tolerance B: Ball bearing P: Plain bearing T: Plain bearing tungsten carbide S: Subplate P: Pipe connection A: Cast iron C: Aluminium S: Stainless steel 0.04: Tooth volume...