カタログ >
DEUTZ >
D 914 The construction equipment engine

D 914 The construction equipment engine
1 / 4ページ

カタログの抜粋

D 914 The construction equipment engine - 1

43 - 129.9 kW | 57.7 - 174.2 hp at 2300 min-1|rpm EU Stage IIIA / US EPA Tier 3 Air-cooled 3 to 6-cylinder naturally aspi- Flywheel and end 100% power takeoff rated engines in inline arrangement. possibilities PTO drives for hydraulic pumps and compressor possible, only a few maintenance points, long oil change intervals. 6-cylinder with turbocharging, chargeair cooled. Capacity: 1.1 l/cylinder, modular sys- Very compact engine design reduces tem with single cylinders. The robust engine design allows world- Best cold starting properties even under wide operation even with high sulphur fuels. Low noise emissions due to acoustically optimized components with very smooth running and high durability. extreme conditions. Highly efficient injection and combustion system ensures optimum engine performance at low consumption. The engines in the power range < 56 kW meets to the US EPA Tier 4 i. Technical data Engine type No. of cylinders Bore/stroke Capacity Compression ratio Nominal speeds Power output1) Power output as per ISO 14396 at speed Max. torque at speed Minimum idling speed Specific fuel consumption2) Weight as per DIN 70020 Part 7A3) mm | in l | cu in min-1 | rpm kW | hp min-1 | rpm Nm | lb/ft min-1 | rpm min-1 | rpm g/kWh | lb/hph kg | lb 1) Gross capacity data without deduction of fan capacity 2) Best full load consumption without cooling system refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60° F. 3) Without starter/dynamo, cooler and fluids but with flywheel and flywheel housing. The data on this data sheet are for information purposes only and are not binding values. The data in the quotation is definitive.

カタログの1ページ目を開く

D 914 The construction equipment engine - 2

Torque curve Note: The engine dimensions and weights vary depending on the scope of delivery.

カタログの2ページ目を開く

D 914 The construction equipment engine - 3

Technical data Engine type No. of cylinders Bore/stroke Capacity Compression ratio Nominal speeds Power output1) Power output as per ISO 14396 at speed Max. torque at speed Minimum idling speed Specific fuel consumption2) Weight as per DIN 70020 Part 7A3) kW | hp min-1 | rpm Nm | lb/ft min-1 | rpm min-1 | rpm g/kWh | lb/hph kg | lb 1) Gross capacity data without deduction of fan capacity 2) Best full load consumption without cooling system refers to diesel with a density of 0.835 kg/dm3 at 15°C | 6.96 lb/US gallon at 60° F. 3) Without starter/dynamo, cooler and fluids but with flywheel and...

カタログの3ページ目を開く

D 914 The construction equipment engine - 4

Order No. 0031 2127 / 09 / 2011 / VC-CM For more information please contact the DEUTZ AG Köln or the responsible sales partner. ⋅ Ottostraße 1 ⋅ 51149 Köln ⋅ Deutschland ⋅ Telefon +49 (0) 221 822-0 ⋅ Telefax +49 (0) 221 822-3525 ⋅ www.deutz.com ⋅ E-Mail: info@deutz.com

カタログの4ページ目を開く