DA30-DA40
1 / 9ページ

{{requestButtons}}

カタログの抜粋

DA30-DA40 - 2

New generation of Doosan Articulated Dump Trucks Reliable machinery for challenging conditions Doosan strives to be a pioneer in the field of product development and performance. With the new generation of DOOSAN Articulated Dump Trucks, the product features have been refined and innovated to meet the tough demands of the future. Our philosophy is to stay one step ahead of the competition and always deliver a full range of Articulated Dump Trucks to suit the market. Doosan ADTs Power The strong power provided by the DA30/40 far exceeds the conventional concept of productivity. Further, its...

カタログの2ページ目を開く
DA30-DA40 - 3

Power Increased Fuel Efficiency Tier 2 / Tier 4i Stage IIIB compliant engine a SINGLE rear differential . Gives highest torque at . Small gear steps . High overall gear spread = l w o Designed to deliver the lowest cost per tonne transported in the market. engine speed at hightravel speed Power & Torque improvement Gross power Gross torque Engine & transmission Turning rings Rear Tandem Automatically Lubricated bearings allows the tandem drives to rotate on the rear axle providing superior ground contact when compared to fixed axles as used by competitors Twin wheeled, gear driven,...

カタログの3ページ目を開く
DA30-DA40 - 4

Durability DRIVELINE Competitor DOOSAN ADT Only 1 rear differential = Easy to operate = Less wear parts = Reduced operating cost Limited slip differential Planetary reduction Interaxle differential Rear differential (limited slip) Tandem gears Green: normal drive Red: 6-wheel drive with wind-up TURNING RING Competitor Equal weight distribution Improved tractive effort Less tyre wear Lower ground bearing pressure Greater stability & safety Transferred and front unit Transferred and front unit weight Transferred weight Transferred and front unit Doosan learned from the forest industry that...

カタログの4ページ目を開く
DA30-DA40 - 5

Comfort CONTROLLABILITY EXCELLENT ALL-ROUND VISIBILITY IMPROVED OPERATOR COMFORT Thanks to the excellent position and the use of special “wide angle“ (heated) side mirrors, the operator is assured of having excellent all-round visibility for safer operation. Lowest-in-class noise level: 71 dB(A) in DA40 ISO6396 Cool box Cup holder Climate control Fingertip control body hoist Sequential gear box Power steering LCD COLOUR MONITOR PANEL “TIP-TRONIC” GEARSHIFT • ” colour display, resolution 800 x 480 pixels 7 • Shows all necessary information for driving and handling the machine • Embedded rear...

カタログの5ページ目を開く
DA30-DA40 - 6

Reliability RADIATOR CAPACITY Air condition condenser Engine cooler Thermostat housing • Increased capacity on radiator. app. 30%. • More retarder torque • Improved oil cooler (reduced water speed) • Thermo-Fan motor controlled by VCU. Transmission cooler Charge air cooler Radiator shield INCREASED BODY CAPACITY + FUNCTIONALITY Increased body hoist cylinder: • dimensions: 120/80 125/85 Body tip system functions: • Body over center slow down • Limit vehicle speed to 10km/h when body is lifted • Body lift not possible for vehicle speed 10km/h • Magnet hold in tip down direction. • Automatic...

カタログの6ページ目を開く
DA30-DA40 - 7

Unique design of Doosan ADTs DOOSAN Articulated Dump Trucks have permanent 6-wheel drive for equal power distribution while the free-swinging rear tandem bogie and the special articulation system offer excellent driving performance. The articulation hinge is positioned behind the turning ring to ensure equal weight distribution. The sloping rear frame provides a lower centre of gravity and improves the overall stability of the truck, ensuring fast and easy tipping of the body for increased productivity in even the most demanding conditions. Many DOOSAN articulated dump trucks have worked...

カタログの7ページ目を開く
DA30-DA40 - 8

Turning radius according to ISO 7457: 7.68 m DA30 width with 750/65 R25 tyres: 3,220 mm A = 4.12m B = 8.85m C = 5.93m D = 8.42m Turning radius according to ISO 7457: 8.42 m Body volume Hardened abrasion-resistant steel plates Tilt cylinders Single stage, double-acting Tipping time Designed for exhaust heating Down from the hinge point Sloping frame Level capacity (with / without tailgate) Heaped capacity (with / without tailgate) Body Body volume Material Body Sloping frame Level capacity (with / without tailgate) Heaped capacity (with / without tailgate) Density index Weights Hardened...

カタログの8ページ目を開く
DA30-DA40 - 9

Portable Power DOOSAN mi|([Mf (Slane) Belgium France ' ■ Czech Republic (Pontchateau) (Dobris) Doosan worldwide factories Heavy Equipment Factory Compact Equipment Factory Attachment Factory China (Yantai) China (Incheon & Gunsan) (Bismarck) (Litchfield) Doosan Infracore Korea Office (HQ)

カタログの9ページ目を開く

DAEWOO Construction Equipment Divisionのすべてのカタログと技術パンフレット

  1. DL200-7

    24 ページ

  2. DX160W-5

    24 ページ

  3. DX235LCR-5

    24 ページ

  4. DX160/DX180LC-5 HT

    16 ページ

  5. DX140LCR-5

    24 ページ

  6. DX75-5B

    11 ページ

  7. DX55-5B

    9 ページ

  8. DL420-5 CVT

    13 ページ

  9. DX190WA

    13 ページ

  10. DX210W

    13 ページ

  11. Amphibious Excavator

    36 ページ

  12. DX340LCA-K

    15 ページ

  13. DX420LCA

    13 ページ

  14. DL200A GP

    11 ページ

  15. DX80R

    9 ページ

  16. DX190W

    28 ページ

  17. DX210WA

    11 ページ

  18. DX420LCA-K

    15 ページ

  19. DX490 /530LC-5B

    9 ページ

  20. DX800LC-5B

    20 ページ

  21. DL550-5BH

    11 ページ

  22. DX160W

    17 ページ

  23. DX480/520LCA-K

    17 ページ

  24. DX400LC-5

    13 ページ

  25. DX140LCA / DX140AF

    11 ページ

  26. DA 30/40

    9 ページ

  27. DX340LC

    17 ページ

  28. DX300LCA

    16 ページ

  29. DX220LCA-2

    13 ページ

  30. DX140AF

    11 ページ

  31. DX140LCA

    11 ページ

  32. HEX bucket

    7 ページ

  33. Material Handler

    17 ページ

  34. Front Shovel

    15 ページ

  35. DX260LCA

    11 ページ

  36. DX225NLCA

    9 ページ

  37. DX255LC

    22 ページ

  38. DX220AF

    10 ページ

  39. DX200A

    11 ページ

  40. DX180LC

    12 ページ

  41. DL550

    9 ページ

  42. DL450

    8 ページ

  43. DL420A

    9 ページ

  44. DL300A

    9 ページ

  45. DX140W

    12 ページ

  46. DL250A

    9 ページ

  47. DX340LCA

    13 ページ

  48. DX220A

    11 ページ

  49. S500LC-V

    2 ページ

  50. DX480LCA-500LCA

    13 ページ

  51. DX700LC

    11 ページ

  52. DX300L

    10 ページ

  53. DX225NLC

    20 ページ

  54. DX225LCA

    13 ページ

  55. DX140LC

    12 ページ

  56. DL200-3/250-3

    13 ページ

  57. DL300

    8 ページ

  58. DL200A

    9 ページ

  59. DX60R

    18 ページ

  60. DX27z

    16 ページ

  61. DX53W

    20 ページ

  62. DX55W

    20 ページ

  63. DX300LC

    20 ページ

  64. DX225LC

    22 ページ

  65. Full liner

    4 ページ

  66. DXQ Quick Couplers

    2 ページ

  67. DX series Buckets

    4 ページ

  68. Full Line Brochure

    2 ページ

  69. SOLAR500LCV

    2 ページ

  70. SOLAR420LCV

    16 ページ

  71. S300LC-7

    16 ページ

  72. S255LC-V

    14 ページ

  73. DX55

    8 ページ

  74. DX35Z

    8 ページ

  75. DX27z - DX30z

    8 ページ

  76. DA30 - DA40

    20 ページ

  77. Measutal Catalog

    2 ページ

  78. Corporate Brochure

    44 ページ

  79. DX300LL

    10 ページ

  80. DL420

    16 ページ

  81. MEGA500V

    6 ページ

  82. MEGA250V

    16 ページ

  83. MEGA200-V

    6 ページ

  84. MEGA400V

    16 ページ

  85. SOLAR210WV

    18 ページ

  86. SOLAR180WV

    18 ページ

  87. DX520LC

    8 ページ

  88. SOLAR470LCV

    16 ページ

  89. SOLAR420LCV

    16 ページ

  90. SOLAR255LCV

    14 ページ

  91. Skid Steer Loader

    12 ページ