Amphibious Excavator
1 / 36ページ

カタログの抜粋

Amphibious Excavator - 2

DOOSAN AMPHIBIOUS Doosan Amphibious is designed to enhance mobility in marshes, swampy area and soft terrain with floating pontoons. Doosan also offer Super Long Reach front kit for more deep and far digging. Using AU kit and SLR kit together, it maximizes versatility of Doosan excavator.

カタログの2ページ目を開く
Amphibious Excavator - 3

DOOSAN AMPHIBIOUS USING THE 6 KINDS OF GOOD REASONS ONE-STOP SHOP One place for complete solutions : (carrier + application + parts + service) Broad coverage via the Doosan service network, fully supported by Wheel loader product specialists. ENGINEERING APPROVED Optimized for Wheel loader equipment high efficiency and performance, resulting in lower running and maintenance cost. Products manufactured to highest standards. Avoid compatibility issues and operating differences from using Non-approved application. PLUG & PLAY READINESS Easy to install and operate.

カタログの3ページ目を開く
Amphibious Excavator - 4

CUSTOMIZED FEATURES Doosan Amphibious has proven itself and performed exceedingly well in the followings applications : · Dredging · Landscaping · Erosion control and prevention · Deepening of canal and river deltas · Maintenance and cleaning of rivers, lakes, shorelines, ponds · Swamps and soft terrain construction. MULTI-SYNCHRONOUS DRIVE SYSTEM AMPHIBIOUS OPTION · Proprietary multi-synchronous drive motor design. · Motors are mounted on front and rear of each pontoon. · It offers superior tracking power as compared to a single motor design. · similar concept that is applied to a full...

カタログの4ページ目を開く
Amphibious Excavator - 5

SUPPLEMENTARY PONTOONS AND SPUDS (OPTIONAL) • Supplementary pontoons can be added on each side to boost stability in deeper water operation. • Spud piles attach to supplementary pontoons help to overcome buoyancy effect, it offers added stability and enhanced operability. • Pontoons are designed and built with provision for future addition of supplementary pontoon and spud system. • Future proof in design. • Doosan SLR kit is designed for using in drainage canal construction and preservation and Light duty excavation at long distance • Doosan offers SLR kit range from 8 tons machine to...

カタログの5ページ目を開く
Amphibious Excavator - 6

PERFORMANCE The performance of the Doosan machine has a direct effect on its productivity. Its new improved engine and new e-EPOS controlled hydraulic system have combined to create an unbeatable hydraulic excavator, with a cost/performance ratio that makes the Doosan machine even more appealing. Maximum performance by Doosan engine Doosan engine perfectly harmonized with the hydraulic system and provides strong power. Mechanical engine providing high resistance to moisture, dust, and bad fuel quality. Smooth swing with Increased Swing torque New motor swing reduction gear minimizes shocks...

カタログの6ページ目を開く
Amphibious Excavator - 7

Bucket Cylinder Boom Cylinder & Swing Motor Improved Excavator control by New e-EPOSTM system The brains of the hydraulic excavator, the e-EPOSTM (Electronic Power Optimizing system), have been improved, through a CAN (Controller Area Network) communication link, enabling a continuous exchange of information between the engine and the hydraulic system. Boom Load holding valve Control Valve The advantages of the new e-EPOSTM impacts at several levels, Ease of operation and user-friendliness: • he availability of a power mode and standard mode guarantee T maximum efficiency under all...

カタログの7ページ目を開く
Amphibious Excavator - 8

FUEL EFFICIENCY RELIEF CUTOFF Control to prevent transfer of unnecessary flow OPTIMIZED LEVER CONTROL Control Typically, the pump tends to supply flow even when the maximum pressure on the system is reached due to severe working environments and large workloads. Relief cutoff technology of Doosan prevent transfer of unnecessary flow to keep powerful working level at the maximum value while reducing consumption of fuel. to prevent unnecessary fuel consumption When operator takes break for rest with the joystick kept fixed, both of the engine and the pump are kept in standby mode with maximum...

カタログの8ページ目を開く
Amphibious Excavator - 9

& AUTO IDLE ENGINE & PUMP MATCHING Matching The auto idle technology effectively controls the engine, and prevents unnecessary fuel consumption while the engine is kept in standby mode. Further, the optimized lever control technology effectively controls the pump to keep power of the pump maximum and prevent fuel consumption while the system is kept shut down. When operating the joystick, rotation rate of the engine and maximum hydraulic power of the pump increase simultaneously for efficient consumption of fuel. The technologies of Doosan enable operation of the system with maximum power...

カタログの9ページ目を開く
Amphibious Excavator - 10

RELIABILITY DOOSAN uses computer-assisted design techniques, highly durable materials and structures then test these under extreme conditions.Durability of materials and longevity of structures are our first priorities. Strengthened Boom The Shape of the boom has been optimized by finite elements design, allowing the loads to be better distributed throughout the structure. This combined with increased material thickness means improved durability and reliability by limiting element fatigue. Arm Assembly In the arm assembly greater strength has been gained by using cast elements and...

カタログの10ページ目を開く
Amphibious Excavator - 11

1 Track System The track system (shoe, chain, roller, pin and bushing) is extremely controlled tight tolerance. The track shoe supported by multiple stands of track chains provided the advantage of uniform pulling force and superior weight distribution across each track shoe. The shape of shoe is optimized to generate the powerful thrust force under water and driving force on the ground also. 3 Axle drum and Sprocket Regular inspection and maintenance is very easy because of manholes side pontoon. Manhole is designed most suitable position to check inside of pontoon and the size of manhole...

カタログの11ページ目を開く
Amphibious Excavator - 12

COMFORT The work rate of the hydraulic excavator is directly linked to the performance of its operator. DOOSAN designed a cabin by putting the operator at the center of the development goals. The result is significant ergonomic value that improves the efficiency and safety of the operator. VISIBILITY has been improved in all directions and the size of the cab has been increased. CONTROL OPTIONS The hydraulic excavator’s power, durability, ease of servicing and its precise control increase its effectiveness and life expectancy. DOOSAN offers an excellent return on investment. Control lever...

カタログの12ページ目を開く

DAEWOO Construction Equipment Divisionのすべてのカタログと技術パンフレット

  1. DL200-7

    24 ページ

  2. DX160W-5

    24 ページ

  3. DX235LCR-5

    24 ページ

  4. DX160/DX180LC-5 HT

    16 ページ

  5. DX140LCR-5

    24 ページ

  6. DX75-5B

    11 ページ

  7. DX55-5B

    9 ページ

  8. DL420-5 CVT

    13 ページ

  9. DX190WA

    13 ページ

  10. DX210W

    13 ページ

  11. DX340LCA-K

    15 ページ

  12. DX420LCA

    13 ページ

  13. DL200A GP

    11 ページ

  14. DX80R

    9 ページ

  15. DX190W

    28 ページ

  16. DX210WA

    11 ページ

  17. DX420LCA-K

    15 ページ

  18. DX490 /530LC-5B

    9 ページ

  19. DX800LC-5B

    20 ページ

  20. DL550-5BH

    11 ページ

  21. DX160W

    17 ページ

  22. DX480/520LCA-K

    17 ページ

  23. DX400LC-5

    13 ページ

  24. DX140LCA / DX140AF

    11 ページ

  25. DA 30/40

    9 ページ

  26. DX340LC

    17 ページ

  27. DX300LCA

    16 ページ

  28. DX220LCA-2

    13 ページ

  29. DX140AF

    11 ページ

  30. DX140LCA

    11 ページ

  31. HEX bucket

    7 ページ

  32. Material Handler

    17 ページ

  33. Front Shovel

    15 ページ

  34. DX260LCA

    11 ページ

  35. DX225NLCA

    9 ページ

  36. DX255LC

    22 ページ

  37. DX220AF

    10 ページ

  38. DX200A

    11 ページ

  39. DX180LC

    12 ページ

  40. DL550

    9 ページ

  41. DL450

    8 ページ

  42. DL420A

    9 ページ

  43. DL300A

    9 ページ

  44. DA30-DA40

    9 ページ

  45. DX140W

    12 ページ

  46. DL250A

    9 ページ

  47. DX340LCA

    13 ページ

  48. DX220A

    11 ページ

  49. S500LC-V

    2 ページ

  50. DX480LCA-500LCA

    13 ページ

  51. DX700LC

    11 ページ

  52. DX300L

    10 ページ

  53. DX225NLC

    20 ページ

  54. DX225LCA

    13 ページ

  55. DX140LC

    12 ページ

  56. DL200-3/250-3

    13 ページ

  57. DL300

    8 ページ

  58. DL200A

    9 ページ

  59. DX60R

    18 ページ

  60. DX27z

    16 ページ

  61. DX53W

    20 ページ

  62. DX55W

    20 ページ

  63. DX300LC

    20 ページ

  64. DX225LC

    22 ページ

  65. Full liner

    4 ページ

  66. DXQ Quick Couplers

    2 ページ

  67. DX series Buckets

    4 ページ

  68. Full Line Brochure

    2 ページ

  69. SOLAR500LCV

    2 ページ

  70. SOLAR420LCV

    16 ページ

  71. S300LC-7

    16 ページ

  72. S255LC-V

    14 ページ

  73. DX55

    8 ページ

  74. DX35Z

    8 ページ

  75. DX27z - DX30z

    8 ページ

  76. DA30 - DA40

    20 ページ

  77. Measutal Catalog

    2 ページ

  78. Corporate Brochure

    44 ページ

  79. DX300LL

    10 ページ

  80. DL420

    16 ページ

  81. MEGA500V

    6 ページ

  82. MEGA250V

    16 ページ

  83. MEGA200-V

    6 ページ

  84. MEGA400V

    16 ページ

  85. SOLAR210WV

    18 ページ

  86. SOLAR180WV

    18 ページ

  87. DX520LC

    8 ページ

  88. SOLAR470LCV

    16 ページ

  89. SOLAR420LCV

    16 ページ

  90. SOLAR255LCV

    14 ページ

  91. Skid Steer Loader

    12 ページ