カタログ >
Cubic Sensor and Instrument Co.,Ltd >
Test Instruction of AM4100-I

Test Instruction of AM4100-I
1 / 7ページ

カタログの抜粋

Test Instruction 1. Prepare necessary accessaries ●正文第一级内容（24号） line + power adapter) 1) DEMO testing kit (DEMO + connect 2) USB to RS232 serial port line ● 正文第二级内容（20号） 3) AM4100-I ●正文第三级内容

カタログの2ページ目を開く

Test instruction 2. Connection 1) Connect DEMO board with AM4100-I 2) Connect serial port line to PC USB port 3) Connect power adapter line to power As show in below picture: Note: 1. DEMO testing kit is used to get digital UART signal from AM4100-I, it is a signal converter. If your own signal converter or testing

カタログの3ページ目を開く

Test instruction 3.Start serial port operator Setting:1) Open and set serial port: COM*; Baud rate: 9600, Databits:8, Stop bits: 1, Parity: No Note: After opening the software, check the p

カタログの4ページ目を開く

Test instruction for UART output 2) Receive setting: Hex

カタログの5ページ目を開く

1. Temperature data is added 500 upon practical measurement result. For example, -20℃ is corresponding to value 300. Temperature value = (DF7 * 256 + DF8 - 500)/10. 2. The measurement result comes out with two data bits, high bit is on the head, and th

カタログの6ページ目を開く

Cubic Sensor and Instrument Co., Ltd. Tell: +86-027-8162 8827 Fax: +86-027-87401159 Email: info@gassensor.com.cn Web: www.gassensor.com.cn Address: Fenghuang Yuan No.3 Road, Fenghuang Industrial Park, Eastlake Hi-tech Development Zone, Wuhan 430205, China

カタログの7ページ目を開く