
カタログの抜粋

Cree® XLamp® XHP70.2 LEDs PRODUCT DESCRIPTION • Available in white, configurable to 6 V PRODUCT FAMILY DATA SHEET generation of Extreme High Power LEDs Flux Characteristics, EasyWhite® Order that delivers the lowest system cost • Available in 5-step EasyWhite bins through the best lumen density, reliability Flux Characteristics, ANSI White Order and color consistency. Built on Cree’s latest high‑power LED technology, the XHP70.2 LED improves the lumen density, optical performance of the XHP70 LED in the same 7.0 mm x 7.0 mm footprint. The new XHP70.2 LED provides an easy drop‑in • Available in ANSI white bins at 3000 K to 7000 K CCT • Available in standard, 70-, 80-, and 90‑minimum CRI options upgrade to achieve higher system LPW for lighting manufacturers with existing XHP70 • Maximum drive current: 4800 mA designs, eliminating redesign costs. Its unparalleled lumen density and longer lifetime at higher operating temperatures • Wide viewing angle: 125° Cree’s Standard White Chromaticity also enable new and innovative lighting • Unlimited floor life at designs at lower system costs. ≤ 30 ºC/85% RH • Reflow solderable - JEDEC J‑STD‑020C Cree’s Standard Cool White Kits Plotted on ANSI Standard Chromaticity Regions... 22 Cree’s Standard Warm and Neutral White • RoHS and REACh compliant Kits Plotted on ANSI Standard Copyright © 2017-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered trademarks of Cree, Inc. UL® and the UR logo are registered trademarks of UL LLC
カタログの1ページ目を開く
CHARACTERISTICS XHP70.2 LEDs are tested and binned in the 12‑V configuration. See the Mechanical Dimensions section on page 28 for pad layout options. Characteristics Thermal resistance, junction to solder point Temperature coefficient of voltage (6 V)* Temperature coefficient of voltage (12 V) Viewing angle (FWHM) Reverse voltage Note: * Data for the 6‑V configuration is calculated and for reference only. Copyright © 2017-2020 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree®, the Cree logo, XLamp® and EasyWhite® are registered...
カタログの2ページ目を開く
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS The following table provides order codes for XLamp XHP70.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA Nominal CCT Minimum Luminous Flux Order Code Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a...
カタログの3ページ目を開く
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - CONTINUED Nominal CCT Minimum Luminous Flux Order Code Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions...
カタログの4ページ目を開く
FLUX CHARACTERISTICS, EASYWHITE® ORDER CODES AND BINS - CONTINUED Nominal CCT Minimum Luminous Flux Order Code Order Code Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin...
カタログの5ページ目を開く
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS The following table provides order codes for XLamp XHP70.2 LEDs. For a complete description of how the flux and chromaticity groups are reflected in the bin code and order code nomenclature, please see the Bin and Order Code Formats section (page 24). Binning condition: TJ = 85 °C; 12 V, IF = 1050 mA Reference condition: TJ = 85 °C; 6 V, IF = 2100 mA Nominal CCT Minimum Luminous Flux Flux (lm) Flux (lm) @ 85 °C @ 25 °C* Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy)...
カタログの6ページ目を開く
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT Minimum Luminous Flux Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the...
カタログの7ページ目を開く
FLUX CHARACTERISTICS, ANSI WHITE ORDER CODES AND BINS - CONTINUED Nominal CCT Minimum Luminous Flux Order Code Notes • Cree maintains a tolerance of ±7% on flux and power measurements, ±0.005 on chromaticity (CCx, CCy) measurements and a tolerance of ±2 on CRI measurements. See the Measurements section (page 26). • Cree XLamp XHP70.2 LED order codes specify only a minimum flux bin and not a maximum. Cree may ship reels in flux bins higher than the minimum specified by the order code without advance notice. Shipments will always adhere to the chromaticity bin restrictions specified by the...
カタログの8ページ目を開くCreeのすべてのカタログと技術パンフレット
-
Cree® XLamp® XP-G LEDs
27 ページ
-
Cree® XLamp® XP-E2 LEDs
43 ページ
-
Cree® XLamp® XR-C LEDs
25 ページ
-
Cree® XLamp® XQ-E LEDs
30 ページ
-
Cree® XLamp® XP-L2 LEDs
26 ページ
-
CLM1C Series White
10 ページ
-
304 Series Flood
8 ページ
-
XSPW Wall Mount
3 ページ
-
Cree Edge Security
6 ページ
-
CGH80030D
5 ページ
-
XLamp XP-L
35 ページ
-
Cree ® XLamp ® XQ-A LEDs
19 ページ
-
2015 LED LIGHTING CATALOG
172 ページ
-
CVFD20065A
6 ページ
-
LMH2 LED Module
21 ページ
-
XLamp ML-E
27 ページ
-
CXB Series
2 ページ
-
LED Lamps
28 ページ
-
T8 Series
2 ページ
-
CS Series
10 ページ
-
CR24 UPKIT
1 ページ
-
SL Series
2 ページ
-
WS Series
2 ページ
-
LS Series
2 ページ
-
XQ-B
10 ページ
-
XP-G2
13 ページ
-
XP-G
12 ページ
-
XP-E2
17 ページ
-
XP-E
19 ページ
-
XP-C
17 ページ
-
XM-L2
12 ページ
-
XM-L High-Voltage White
10 ページ
-
XM-L
13 ページ
-
XH-G
11 ページ
-
XH-B
11 ページ
-
XLamp XB-H LED
12 ページ
-
XLamp XB-D LED
28 ページ
-
MX-6S
12 ページ
-
XLamp ML-C
19 ページ
-
XLamp ML-B
11 ページ
-
XLamp Color LEDs
2 ページ
-
Led light Catalog
156 ページ
カタログアーカイブ
-
SMD LED Data Sheet
6 ページ
-
Xlamp XR LED Data Sheet
13 ページ