angle valve
1 / 52ページ

CRANE®-Bronze Valves Energy Flow Solutions

Key Features & Applications Key Features & Benefits Full Pressure Class offering: Class 125, Class 150, Class 200, Class 300, 200 CWP, and 300 CWP. Highly specified and proven performer for commercial and industrial piping applications. Wide option range seats, discs, trims, and connection type. Typical Applications • General Services Plumbing • Commercial Plumbing and HVAC • Industrial Plumbing and HVAC • Utility Applications • Marine

SW SW SW SW SW SW SW SW SW SW SW SW (SS Seat) SW SW (SS Seat) SW (SS Seat) BRZ PTFE PTFE PTFE SS SS Needle SS

Cross Reference for Commonly Used Valves BRONZE VALVES GATE Class 125 RS-Threaded Class 125 NRS-Threaded Class 125 RS-Solder Class 125 NRS-Solder Class 150 Union Bonnet Class 300 SS Trim GLOBE Class 125 Class 300 SS Trim CHECK Class 125 Threaded Class 125 Solder Class 300 Swing Check Class 300 Lift Check IRON VALVES GATE Class 125 NRS Class 125 OS&Y Class 250 OS&Y GLOBE Class 125 SWING CHECK Class 125 STOP CHECK Class 250 Straight-Way Y-Pattern Class 250 Angle Y-Pattern

General Data Advanced manufacturing techniques and equipment, ongoing engineering research and product development, skilled craftsman, and over fourteen decades of experience in flow control are behind the quality and dependability built into every CRANE® product. This catalog presents some of these products, namely: bronze gate, globe and check valves. The information is presented in a comprehensive manner and includes material, construction, rating, principal dimensions, and weight data. Hydrostatic and Shock Pressures CRANE® valves are suitable for liquid working pressures specified on...

CRANE® Copper Alloys CHEMICAL REQUIREMENTS (%) MECHANICAL PROPERTIES Copper Tin Lead Iron Nickel Manganese Aluminum Zinc Silicon STEAM OR VALVE BRONZE CASTINGS COMPOSITION BRONZE CASTINGS COPPER-ZINC SILICON ALLOY ROD LEADED SEMI-RED BRASS SILICONE BRASS CASTINGS FREE CUTTING BRASS ROD/BAR ALUMINUM SILICONE BRONZE ROD LEADED RED BRASS CONTINUOUS CASTINGS BRASS PLATE/SHEET STRIP BRASS WIRE ALUMINUM SILICONE BRONZE FORGINGS COPPER SILICON ALLOY ROD/BAR SEAMLESS COPPER WATER TUBE Tensile Yield Elongation * Also may include maximum of 0.05% phosphorus. ** Maximum percent of elements permissible...

Introduction to Ratings A) Ratings for Class 125, 150, 200, and 300 bronze valves are indicated on page 8 in this catalog: • PSI Steam, Basic Rating; i.e., the nominal rated pressure of the valve. • PSI Cold Working Pressure; i.e., the maximum rated pressure of the valve at a temperature range of -20° to 150°F (-30° to 65°C). B) Ratings for Class 125 and 150 bronze valves equipped with non-metallic discs are indicated on the relevant catalog pages in this manner: • PSI Saturated Steam; where “Saturated Steam” is the maximum rated pressure of the valve at the corresponding temperature of...

Pressure-Temperature Ratings Press. Class End Conn. Temp °F Press. Class End Conn. Temp °C * Some codes (i.e. ASME BPVC, Section 1) limit the rating temperatures of the indicated material to 406°F (208°C). ** Alternative ratings for valve size 1/8" - 2" having threaded ends and union bonnet, when so indicated on the relevant catalogue pages. Technical Data: Flow Data (Cv Values) The flow coefficient Cv expresses flow rate in usg per minute of water at 60°F, with 1.0 psi pressure drop across the valve. Bronze Gate Valves All Globe and Angle Valves 17TF 382P 384P 1310 7TF, 14 ½P, 212P Check...

Class 125 • Threaded Bonnet • Rising Stem • Threaded Ends 428 Gate Valve Materials of Construction No. Description Material 1 Body Bronze 2 Bonnet Bronze 3 Stem Copper Silicon Bronze 4 Disc Bronze 5 Packing Ring Graphite (Asbestos Free) 6 Gland Brass 7 Packing Nut Brass 8 Handwheel Malleable Iron 9 ID Plate Aluminum 10 Handwheel Nut Brass See page 8 for Pressure-Temperature Ratings. Industry Standards MSS SP-80, Type 2 Inches (millimeters) - Pounds (kilograms) Valve Size ⁄4

Class 125 • Union Bonnet* • Rising Stem • Threaded Ends 428UB Gate Valve Description Body Bonnet - Union Stem Disc Gland Packing Nut Union Ring Packing Ring Material Bronze Bronze Copper Silicon Bronze Bronze Brass Bronze Bronze Graphite (Asbestos Free) (1⁄4" - 2") Brass (2 1⁄2" - 3") Bronze Malleable Iron Bonnet Stud Phosphated Steel Phosphated Steel (2 1⁄2" - 3" only) Synthetic Klingersil C4500 Glass Fiber Nitrile Filled ** Not Shown See page 8 for Pressure-Temperature Ratings. Industry Standards MSS SP-80, Type 2 Inches (millimeters) - Pounds (kilograms) Valve Size ⁄4 * 2 ½" and 3" have...

Class 125 • Threaded Bonnet • Non-Rising Stem • Threaded Ends 438 GateValve Description Body Bonnet Stem Disc Stuffing Box Packing Ring Gland Packing Nut Handwheel ID Plate Handwheel Nut Material Bronze Bronze Brass Bronze Brass Graphite (Asbestos Free) Brass Brass Malleable Iron Aluminum Brass See page 8 for Pressure-Temperature Ratings. Industry Standards MSS SP-80, Type 1 Inches (millimeters) - Pounds (kilograms) Valve Size ⁄4

300 CWP • Threaded Bonnet • Non-Rising Stem • Solder Ends 1324 Gate Valve No. Description Material ASTM Spec. 1 Body Bronze B-62 C83600 2 Bonnet Bronze B-62 C83600 3 Stem Copper Silicon Bronze B-371 C69400 4 Disc Bronze B-62 C83600 6 Stuffing Box Copper Silicon Bronze B-371 C69400 8 Packing Ring Graphite (Asbestos Free) 9 Gland Brass BSEN12164 CW614N 10 Packing Nut Brass BSEN12164 CW614N 11 Handwheel Malleable Iron A-197 F22000 12 ID Plate Aluminum 13 Handwheel Nut Brass BSEN12164 CW614N Caution: Before installing solder-joint valves, be sure solder or brazing alloy melting point is high...

Class 150 • Threaded Bonnet • Non-Rising Stem • Flanged Ends Materials of Construction Description Body Bonnet Disc Stem Packing Gland Packing Nut Stem Bush Material Bronze Bronze Bronze Copper Silicon Bronze Graphite (Asbestos Free) Brass Brass (1") Copper Silicon Bronze (1 1⁄4" - 2") Copper Silicon Bronze Stuffing Box (2 1⁄2" - 3") Bronze Handwheel Malleable Iron Handwheel Nut Brass ID Plate Aluminum (3" only) Synthetic Glass Fiber Gasket Nitrile Filled See page 8 for Pressure-Temperature Ratings. Industry Standards Inches (millimeters) - Pounds (kilograms) Valve Size 1 C