カタログ >
COHERENT >
Coherent BioRay

Coherent BioRay
1 / 5ページ

カタログの抜粋

BioRay Elliptical Dot Laser BioRay Features: DNA research, new drug development, fluid evaluation, biological maintenance activities – bioinstrumentation laser sources currently provide core capabilities for all these applications, as well as many others. The Coherent BioRay enables an unparalleled expansion of bioinstrumentation lasers into other applications and markets. Its unparalleled performance, reliability and repeatability provide a stable, cost-effective laser source for a wide range of emerging applications in the bioinstrumentation space. • 405 nm to 640 nm • Power up to 50 mW • External focusability • Pointing <10 μrad/°C • Analog modulation • Microprocessor controlled • Advanced service monitor • RS-232 controllable with GUI interface • Auto scaling input power 5 to 24 VDC • ESD, Over Temp, Reverse Polarity BioRay Applications: • Genetic Sequencing • PCR • High Throughput Drug Screening • Hematology • Medical Diagnostics • Micro Array Scanners • Flow Cytometry Superior Reliability & Performance

カタログの1ページ目を開く

Elliptical Dot Laser System Specifications Wavelength Drift (nm/°C) Output Power (mW - Max. 2) Pointing Stability Over Temp. (µrad/°C) Warm up Time (minutes)(from Cold Start) - Analog Modulation Maximum Bandwidth (KHz) Rise Time (10% to 90%)(nsec) Fall Time (90% to 10%)(nsec) Modulation Depth (%) Linear Range (VDC) Static Beam Alignment5 (degrees) Operating Current (mA)-(Max. at 25°C) Input Impedance (kOhm) Beam Angle (mrad) Heat Dissipation of Laser Head (W)(Max.) Ambient Temperature Operating Condition (°C) Non operating Condition (°C) - Center Wavelength at 25°C. Delivered power. X =...

カタログの2ページ目を開く

Mechanical Specifications Material Black annodized AL 6061 Ti Commands Description CDRH_Enables/Disables CDRH Delay BAUD_Set Baud Rate_ HAND Enables/Disables SCPI Handshaking HOUR Reports System Lasing Hours MOD Reports Laser Model PNUM Reports Part Number SNUM Reports Serial Number USER Stores User Defined Identification POW:LEV Reports Diode Laser Power DIOD Reports DiodeTemperature INT Reports Internal Temperature HIGH Reports Diode High Temperate Set MPOL Sets Modulation Polarity AMPL Sets Laser Output Power STAT Reports System Status CURTEV Reports Diode Current Color Description Pin...

カタログの3ページ目を開く

Elliptical Dot Laser Fault Conditions Built-in microcontroller probes most critical parameters of the circuit with ADCs such as: • Temperature • Photodiode output voltage • Laser diode voltage • Laser diode current • Value of inverted and non-inverted modulating signal in case of StingRay-AM product options. Based on the results of the parameter measurement microcontroller can detect following fault conditions • Over temperature • Circuit malfunction • Absence of the input modulating signal • Critical drop of laser diode output power due to aging Fault Output Circuit Fault output is an open...

カタログの4ページ目を開く

Elliptical Dot Laser Mechanical Specifications Standard Configuration Ø18.6 mm (0.73 in.) Hirose Plug Front View External Focus Adjustment Locking 34.3 mm Set Screw (No. 2-56) (1.35 in.) Rear View Indicator Light Beam Exit External Focus Adjustment Side View Ø19.05 mm (0.75 in.) Clamping Area 50.8 mm (2.0 in.) Ø6.7 mm TYP. Cable Length 2.3 mm (0.09 in.) 150 mm (5.9(0.27 in.) in.) Indicator Light Bottom View External Focus Adjustment Locking Set Screw (No. 2-56) Top View External Focus Adjustment Front View Rear View Ø19.05 mm (0.75 in.) Clamping Area Cable Length 150 mm (5.9 in.) Beam Exit...

カタログの5ページ目を開く

Coherent BioRay 1 / 5ページ

カタログの抜粋

COHERENTのすべてのカタログと技術パンフレット

Coherent BioRay
1 / 5ページ