カタログ >
Cleaver-Brooks >
ILS System - Light and Switchboard

ILS System - Light and Switchboard
1 / 4ページ

カタログの抜粋

ILS SYSTEM INTEGRATED LIGHT & SWITCHBOARD

Integrated LED Technology Multiple Applications The Integrated Burner Control Subpanel and LED Switchboard provides a wiring interface between the flame safeguard and combustion equipment reducing the potential for wiring errors and improving quality. The LED switch panel is mounted to the front of the control panel and connects to the Integrated Burner Control Subpanel using interconnecting cables. It provides power, fuel selection and auto/manual burner control along with visual indication of the burner sequence. The system consists of the Integrated Burner Control Subpanel, the LED...

カタログの2ページ目を開く

The LEDs provide the following information: Power On - white LED indicates presence of control power in the subpanel. Call for Heat - white LED indicates that a demand for burner startup is present. Ignition - white LED indicates the burner is in the ignition phase of operation. Main Fuel - Dual color LED that indicates that the main fuel valve(s) are powered. Dual fuel mode: Green light - gas valves are open Amber/Yellow light - oil valves are open Single fuel mode: Amber light only Burner, Limit and Auxiliary Alarm - Red LED indicates what equipment section is in an alarm...

カタログの3ページ目を開く

Product Specifications Electrical Ratings Ambient Temperature Ranges: Environmental Ratings CAUTION: Adding external limits or controls will require removal of appropriate terminal jumpers. 250V T5A WARNING:Relays must only be replaced with approved OMRON part# MY2-AC110/120S LED Switch Panel: 4 oz. (124 grams) Burner Control Subpanel: 1 lb., 12 oz. (871 grams) Humidity: 85% relative humidity, continuous, Underwriters Laboratories, Inc. (component cULus) Figure 1. Integrated Burner Control Subpanel, dimensions in inches (mm). Models Available Single and dual fuel for the following modes of...

カタログの4ページ目を開く