カタログ >
CKD >
GHV series

GHV series
1 / 4ページ

カタログの抜粋

Combination Valve 3-in-1 package (solenoid valve + governor + solenoid valve) realizes compact piping in double shutoff application. Main features Space-saving integrated structure Two solenoid valves equipped with a governor function are integrated into a compact structure. Face to face 1/3 (50 A, CKD comparison) JIS B 8415 double shutoff is realized with one unit, reducing the space of the system or equipment. Reduction of man-hour for wiring and piping (The solenoid valve is of a simultaneous energizing type.) The integrated structure of double shutoff reduces the wiring and piping man-hour to that of one unit. Available for medium pressures up to 50 kPa Ample variations • Solenoid valve with integrated governor + solenoid valve • Solenoid valve + solenoid valve • Solenoid valve + solenoid valve (slow open) With switch for confirming action Easily changed port size The port size can be changed in the range of 20 A to 50 A by flange replacement. Main applications Industrial furnace Gas absorption water cooler/heater Drying furnace System Example Refer to "Safety Precautions" on the rear side before use.

カタログの1ページ目を開く

*1: -15 to 60 (no freezing) for the version with switch for confirming action ©Variation ©Port size ©Option ©Voltage Flow characteristics Reference: Conversion coefficient conversion flow rate factor = (flow shown on table) x (coefficient) Open operating characteristics (GHV-L) Flow rate m3/h (ANR, specific gravity 0.65) \ before shipment

カタログの2ページ目を開く

Internal structure and parts list Internal structure, parts list and dimensions • Solenoid valve with integrated governor + solenoid valve Dimensions with optional equipment • Solenoid valve + solenoid valve • Solenoid valve+solenoid valve (slow open) • With switch for confirming action

カタログの3ページ目を開く

Safety precautions Always read before use Also read precautions of "Gas Combustion System (G-2)". 0 A solenoid valve is not designed as a safety valve such as an emergency shut off valve. When using in such a system, provide other measures to ensure safety. 9 Install this product on a place not subject to vibration. 9 Fluids other than the gases described in the specification 0 Iron rust and dirt, etc., in fluid can cause operation faults or leaks, and lowering product performance. Eliminate such substances. 9 Avoid direct sunlight and contact with water or oil when installing this product....

カタログの4ページ目を開く