RS10
1 / 4ページ

カタログの抜粋

RS10 INNOVATIVE SURVEYING SLAM SOLUTION MAPPING & GEOSPATIAL

The RS10 brings a new approach to geospatial surveying by integrating GNSS RTK, laser scanning and visual SLAM technologies into a single platform designed to improve the efficiency and accuracy of indoor and outdoor 3D scanning and surveying tasks. The RS10 is a versatile solution for surveying, civil engineering and BIM professionals, as well as for applications such as agricultural and forestry surveying, power line inspection, material pile volume calculation and data collection in underground spaces. With the RS10, surveyors are able to overcome the challenges of surveying in areas...

カタログの2ページ目を開く

ONE DEVICE, TWO WORKING WAYS Ready for RTK Users Operates in rover mode with CHCNAV LandStar™ software for easy use and minimal training. Hot-Swappable Battery Runs for 60 minutes on a single battery, allowing for easy replacement without powering off the unit. Precision Alert When used as a SLAM scanner, SmarGo provides real-time accuracy information for on-the-spot improvement. Automatic Drawings Using the CHCNAV software ecosystem, the RS10 data can be sent to CoProcess for instant drawing extraction.

カタログの3ページ目を開く

measurement rate Selectable scan speed 10 Hz GNSS Accuracies Real time kinematic H: 8 mm + 1 ppm RMS Initialization time: <10 s Initialization reliability: >99.9% Post-processing kinematic H: 3 mm + 1 ppm RMS Attitude accuracy 0.005° RMS pitch/roll, after post-processing 0.010° RMS heading Position accuracy 0.010 m RMS horizontal, after post-processing 0.020 m RMS vertical Ingress protection IP64(5) (according to IEC 60529) Humidity (operating) 80%, non-condensing SmartGo software Data acquisition control, real-time point cloud display, etc CoPre intelligent POS process, Adjust & Refine,...

カタログの4ページ目を開く

RS10 1 / 4ページ

カタログの抜粋

CHC Navigation | CHCNAVのすべてのカタログと技術パンフレット

RS10
1 / 4ページ