カタログの抜粋
Cat® 7495 HD Electric Rope Shovel Specifications Dimensions Dipper payload 81.8 tonnes (90 tons) Dipper capacity 19.1-61.2 m3 (25-80 yd3) Length of boom 20.4 m (67 ft 0 in) Effective length of dipper handle 10.9 m (35 ft 10 in) Overall length of dipper handle 14.3 m (47 ft 0 in) Weights Working weight, with dipper and standard links Net weight, domestic, without ballast or dipper General-purpose dipper 49.78 m3 (65 yd3) Ballast (furnished by customer) 1 306 346 kg (2,880,000 lbs) 972 502 kg (2,144,000 lbs) 73 482 kg (162,000 lbs) 260 362 kg (574,000 lbs) • These weights will vary slightly depending upon dipper and optional Main Structures Dual-motor independent drive Revolving Frame (Center Section) Welded, impact-resistant steel Length: 8.38 m (27 ft 6 in) Width: 4.29 m (14 ft 1 in) Turntable Forged rim alloy steel swing rack pitch diameter 5.18 m (17 ft 0 in) Teeth external cut 24.13 cm face (9.5 in) Tapered, forged alloy steel roller rails diameter 4.5 m (14 ft 9 in) Number of tapered rollers 56 Tapered rollers diameter 20.96 cm (8.25 in) Swing Two planetary gearboxes, each driven by a vertically mounted motor, are mounted on either side of the revolving frame. Dual-output pinion shafts from each gearbox engage the swing rack. Hoist A planetary gearbox with dual-output pinions provides the hoist torque transfer from the electric motor to the hoist drum gear. Main Structures Crawler Mounting Overall width 213.36 cm (84 in) treads, standard Overall width 274.32 cm (108 in) treads Overall length of mounting Total effective bearing area (213.36 cm treads) Total effective bearing area (274.32 cm treads) Number and diameter of rollers Take-up tumblers diameter Number and pitch of treads Planetary Propel 9.98 m (32 ft 9 in) 10.44 m (34 ft 3 in) 10.41 m (34 ft 2 in) 32.0 m2 (344 ft2) 401 kPa (58.1 Psi) 41 m2 (442.3 ft2) 311 kPa (45.2 Psi) Lower: 8, 139.70 cm (55 in) Upper: 10, 60.96 cm (24 in) 157.48 cm (62 in) 74, 61.91 cm (24.375 in) Lube System • Single-line system applies lubricant and grease via the PLC • 6 pumps (4 for lubricant and 2 for grease) located in an insulated, double-walled lube room
カタログの1ページ目を開くOptimal Working Ranges Aj Dumping height at maximum electric crowd limit 8.45m (27 ft 9 in) B Dumping radius (maximum) 21.0 m (69 ft 0 in) C Cutting height (maximum) 17.3 m (56 ft 10 in) D Cutting radius (maximum) 23.97 m (78 ft 8 in) E Radius of level floor 16.92 m (55 ft 6 in) (boom point sheaves) 20.1 m (65 ft 10 in) (boom point sheaves) 19.74 m (64 ft 9 in) I Clearance radius (revolving frame) 8.67 m (28 ft 5 in) J Clearance under frame (to ground) 3.45 m (11 ft 4 in) M Clearance under lowest point in truck frame/propel gearcase 0.86 m (34 in) IGBTAcutrol drive system Power...
カタログの2ページ目を開くElectric Rope Shovel—7495 HD Front End Boom Boom Boom point sheaves Boom point sheave diameters Handle diameter Wall thickness (nominal) welded, impact-resistant steel twin-grooved, flame-hardened 2.43 m (8 ft) 86.36 cm (34 in) 7.62 cm (3 in) Rope Data Hoist Crowd Retract Boom susp. Dipper trip No. Diameter 2 1 1 4 1 69.8 mm (2.75 in) 63.5 mm (2.5 in) 63.5 mm (2.5 in) 82.6 mm (3.25 in) 15.9 mm (.625 in) Type twin dual single dual single dual equalized single Construction 6 x 37 6 x 37 6 x 37 struct.strand 6 x 37 For more complete information on Cat products, dealer services, and industry...
カタログの3ページ目を開くCaterpillar Global Mining/キャタピラーのすべてのカタログと技術パンフレット
-
D9 DOZER
20 ページ
-
745
28 ページ
-
725C2
28 ページ
-
Cat ® 621K
4 ページ
-
D9T
20 ページ
-
D8T
20 ページ
-
735B Articulated Truck
20 ページ
-
725 Articulated Truck
20 ページ
-
777D
28 ページ
-
775G
32 ページ
-
773E
24 ページ
-
772G
28 ページ
-
772
32 ページ
-
770
32 ページ
-
16M
24 ページ
-
14M
28 ページ
-
795F AC
24 ページ
-
793D
32 ページ
-
789D
28 ページ
-
789C
28 ページ
-
HW300
16 ページ
-
785D
24 ページ
-
AEXQ1170 ShovelsBrochure
32 ページ
-
D11T/D11T CD
28 ページ
-
D10T
20 ページ
-
MD6240 Rotary Drill
28 ページ
-
Mining Truck (797F)
28 ページ
-
Motor Grader (16M)
24 ページ
-
Off-Highway Truck (773G)
32 ページ
-
Off-Highway Truck (777G)
36 ページ
-
Open Bowl Scraper (627G)
24 ページ
-
Open Bowl Scraper (627H)
20 ページ
-
Open Bowl Scraper (623H)
20 ページ
-
Open Bowl Scraper (631G)
24 ページ
-
Open Bowl Scraper (621H)
20 ページ
-
Open Bowl Scraper (657G)
24 ページ
-
LHD Vehicles
8 ページ
-
CTS Drive Systems
8 ページ
-
Longwall Automation
12 ページ
-
Cat® track drills MD5150
28 ページ
-
Cat® 8750 DRAGLINE RANGE
28 ページ
-
Master Idler
399 ページ
-
740B articulated track
20 ページ
-
730 articulated track
20 ページ
-
Feeder Breakers
4 ページ
カタログアーカイブ
-
Draglines
8 ページ
-
988H Wheel Loader
24 ページ
-
844H Wheel Dozer
20 ページ
-
Scoops
8 ページ
-
Face Haulers
12 ページ
-
Continuous Miners
8 ページ
-
Longwall Shearers
16 ページ
-
Roof Support Carriers
12 ページ
-
Roof Support Systems
8 ページ
-
Automated Plow Systems
12 ページ
-
Jumbo Drills
12 ページ
-
Hydraulic Shovels
12 ページ
-
Electric Rope Shovels
12 ページ