カタログ >
C.A.Technologies >
Lynx 300C (L300C)

Lynx 300C (L300C)
1 / 4ページ

カタログの抜粋

Lynx 300C PRESSURE/SIPHON FEED SPRAY GUN PRODUCT INFORMATION CONVENTIONAL AIR CAP AND FLUID NOZZLE CHART MODEL NO. PRESS. OR SIPHON *RECOM. GUN INLET PRESS. AVAILABLE FLUID NOZZLES TIPS NEEDLES/ marking on needle Actual fluid nozzle and air cap combinations are determined by application (see application chart page 4) Gun inlet pressures may vary as required by application Coating Atomization Technologies 337 South Arthur Avenue, Louisville CO 80027 Phone: 888.820.4498, Fax: 303.438.5708 _www.spraycat.com_

カタログの1ページ目を開く

Operation and Maintenance Instructions for Spray Guns Operation 1. Connect air supply hose at handle of gun. 2. Connect a pressurized fluid supply or paint siphon cup to the gun fluid inlet. 3. Fluid flow can be controlled using the fluid control knob, this restricts flow by limiting needle travel. It is best to control fluid flow by proper selection of fluid orifice size and use the fluid control knob to “fine tune flow rate”. 4. Fan width can be adjusted using the fan control knob. Turning the knob clockwise narrows the fan. Maintenance IMPORTANT! Routine cleaning and maintenance is...

カタログの2ページ目を開く

**See air cap selection chart on page 1 indicates part included in repair kit # 10-106

カタログの3ページ目を開く

CP-L300C Smart Pack Includes: 98-0104 3/8” Socket Air Caps and Needles Shown on Page 1 CP-L300C-303R2 Includes: 51-303 1 QT Aluminum Pressure Cup Air Caps and Needles Shown on Page 1 CP-L300C-PPSR2 Includes: 91-460 950 mL 3M™ PPS™ Pressure Cup 91-462 Lids and Liners (Available in 25 Pack) 98-0113 Gun Cleaning Brush Air Caps and Needles Shown on Page 1

カタログの4ページ目を開く