2013 Catalog
1 / 47ページ

MISSION STATEMENT C.A. Technologies is dedicated to providing the highest quality and most innovative products available, supported by professional and intelligent customer service. Our ongoing product training and guidance, as well as honest and competitive pricing insures our customers the highest value for their investment and continued growth and success for our distributors. Coating Atomization Technologies, LLC P.O. Box 17820 Boulder CO 80308 (888) 820-4498 Fax (303) 438-5708 www.spraycat. com

Full access to all our part sheets, specialty literature, training/troubleshooting videos and our part number and price calculators. 20:1 AIR ASSIST AIRLESS UNIT Durable and Dependable Pump lor Continuous Operation italyzed materia Stainless Steel Tanks '& flfO and Application Double Diaoiracm Pumps e 'n*° a>1^ Application video Parti (Introduction/bobcat vs cougar/safety information) Pan I (Setting up your AAA) CUP & TANK OUTFITS PART NUMBER & PRICE CALCULATOR

Q: Why do C.A.T. 300, CPR and SLP series nozzles atomize so much better than the competition? A: Our Patented12-Point Balanced Plenum C.A.T. The atomizing air hits our 12-point fluid nozzle behind the air cap and is diffused. It surrounds the fluid in a uniform shroud of atomizing air as it leaves the air cap. Without 12-point diffusion, high and low spikes or hot spots exist as the air leaves the air cap and surrounds the fluid. This results in more uniform SMALL particles. This results in very small and very LARGE particles. A flatter more uniform finish is achieved. Orange peel finish....

*All C.A. Technologies spray guns are available in outfits, ie. 1qt. cups, 2qt. cups, tanks and double diaphragm pumps. If you have any questions regarding a spray gun outfit, please visit www.spraycat.com and click on our outfits part number and price calculator or call our customer service. Thank you. LYNX 100H HVLP (General Purpose) The L100H is an industrial general purpose low CFM HVLP air spray gun. The L100H is unique in that it offers a wide range of nozzles that will function with small compressors (2 HP) to spray dyes, spray stains, topcoats and primers. Other air nozzles are...

HVLP FE-Line Fine Finish Finish Excellence The new FE-Line Fine Finish HVLP gun is our new lightweight ergonomic spray gun. The FE-Line Fine Finish is designed around C.A.T. SLP technology. The FE-Line Fine Finish HVLP has been designed for spray stains, toning and consistent color matching applications. The 12-point air diffusion design significantly improves pattern coverage uniformity, process capability and color consistency. The FE-Lines lightweight ergonomic design also reduces fatigue and increases mobility. *Also available in our new CAT Pack, see page 14. FE-Line Fine Finish...

HVLP JAGUAR 100 HVLP (Gravity, General Purpose) The J100H is a general purpose gravity feed gun intended for automotive and wood finishing. Features include all stainless steel fluid passages, low volume nozzles for small HP compressor use and self-adjusting needle packing. Comes standard with 750cc aluminum gravity cup. This gun complies with all HVLP environmental regulations. *Also available in our new CAT Pack, see page 14. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 16m x 1.5 Weight 25 oz. Standard Nozzle Setup: 1.4 x 1093 - Requires 10 CFM (other nozzles available) Repair Kit...

COMPLIANT CPR-G - C.A.T. Pressure Reduced (Fine Finish) Once again C.A.T. is proving why we are the technology leading spray gun manufacturer. This is the newest compliant technology on the market. The CPR spray guns from C.A.T. combine the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. The nozzle requires 11cfm at 29 psi recommended inlet pressure. The CPR guns are available in two types of packs, one for the automotive industry, and one for the wood industry. These kits will also be available with your standard 1qt. aluminum gravity cup or the...

CONVENTIONAL LYNX 100C (General Purpose) The LYNX 100C is a general purpose conventional air spray gun for spraying a wide range of coatings. Designed for production use, the L100C is perfect for all coatings from thin to thick. May also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives. This gun features a self-adjusting needle and air valve packing, air adjusting valve and rugged construction. The LYNX gun comes standard with all stainless steel fluid passages. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 20 oz. Standard Nozzle...

CONVENTIONAL TOMCAT 100C (General Purpose) The T100C is an economical general purpose conventional air spray gun for spraying a wide range of coatings. Designed for production use, the TOMCAT is perfect for all coatings from thin to thick, stains to glue. Can also be used with internal mix nozzles as well as carbide tipped fluid nozzles for abrasives. This gun features a self-adjusting needle packing, inexpensive nozzle replacement and rugged construction. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 19 oz. Pressure and siphon setups available. Standard Pressure...

CONVENTIONAL PANTHER 200Z (Zinc Rich) The P200Z is a rugged, general purpose, conventional air spray gun designed for spraying zinc-rich coatings. Our P200Z has a Delrin tipped fluid nozzle to prevent plating and a unique leather / Teflon packing arrangement that increases your spraying time before the gun needs to be cleaned. The body and air cap are Teflon anodized to aid in clean-up and extend the life of the gun. This gun comes standard with air-adjusting valve, stainless steel fluid passages and heavy-duty needle return spring. *Also available in our new CAT Pack, see page 15. PANTHER...

HVLP AMCPR (Fine Finish) The AMCPR From C.A.T. combines the transfer efficiency of HVLP with the speed and finish quality of conventional air spray. Included with each AMCPR are the CPR and HVLP air cap for multi-application purposes. Each AMCPR has the ability to be used in circulating or non circulating systems and are block mount ready for flatline machinery. Specifications: Air Inlet 1/4 NPS (m) Fluid Inlet 3/8 NPS (m) Weight 24 oz. 23-2101 (CPR) - Consumes 11 cfm @ 29 psi gun inlet 23-1302 (HVLP) - Consumes 13.5 cfm @ 45 psi gun inlet Repair Kit P/N 10-146 Available with standard...