カタログ >
BÜRKERT FLUID CONTROL SYSTEMS >
Solenoid valves 6240

Solenoid valves 6240
1 / 9ページ

カタログの抜粋

Solenoid valve valve 6240 The compact power Gases, drinking water, hot liquids and steam are the application focuses of the type 6240 piston valve. The body, seals and design were selected in accordance with the required certificates and general requirements. The piston solenoid valve 6240 combines the advantages of a servo-controlled and a direct-acting valve. It is suitable for both high pressures and large diameters. The fixed coupling between the pilot valve and piston of the main seat ensures complete opening even without differential pressure. The advanced piston design and optimal...

カタログの2ページ目を開く

The material and construction form the basis for a valve’s reliability and safe operation. Especially fuel gases and steam place high requirements on the materials used. The 2/2-way piston valve type 6240 features a large selection of tested materials. This makes it possible to adapt the valve to specific applications. The following versions are available: Versions optimized for applications are also available, in addition to certifications, facilitating the choice of the right valve. The following table provides an overview. Pressure range: 0 to 25 bar for liquids (up to 40 bar for gaseous...

カタログの3ページ目を開く

Functioning principle Sample applications Spring-coupled piston valve Steam applications The anchor of the pilot valve is firmly connected by a spring to the piston of the main valve. The springcoupling ensures that a force is exerted directly on the piston when the valve is switched on, causing the main valve to open. Even without differential pressure this force is sufficient to open the valve completely . At a high differential pressure the switching of the valve is determined essentially by the characteristics of the servo valve. In this case the differential pressure supports the...

カタログの4ページ目を開く

Fluidic design and robust construction Highly durable and resistant Effective explosion protection Compact and highly efficient Body variants and pressure ranges Explosion protection Compact power bundle The brass version of the valve is suitable for controlling liquids and gases. The special fluidic form (ramp design) of the valve body enables maximum flow rates. The stainless steel version allows use in slightly acidic and alkaline solutions. For applications in gases the device is available with PTFE sliding rings, which ensure low-wear operation and long maintenance intervals even when...

カタログの5ページ目を開く

x = available in standard version A = available on request Solenoid valves 6240 Solenoid valves 6240 1 1

カタログの6ページ目を開く

Accessories: Connectors The connectors 2508 and 2509 are available as accessories supplement and expand the application spectrum of the solenoid valve. Besides visualization of the switching state and various standard functions, an energy-saving reduced power version (2508 LR) is available for extended duty cycles. With polarity protection, recovery diode and LED Without circuitry, 2-pin + protective conductor With rectifier and varistor With power reduction type 2508 LR Technical data See also data sheet for type 2508 Solenoid valves 6240 Solenoid valves 6240 1 3

カタログの7ページ目を開く

For up-to-date addresses please visit us at www.burkert.com. Norway Poland Austria Czech Republic United Kingdom Germany Italy China Hong Kong India Canada Korea Malaysia Philippines Singapore United Arab Emirates Brazil South Africa Credits: © and concept: Christian Bürkert GmbH & Co. KG | Realization: WOLF, Berlin | Photography: Münch Lichtbildnerei, Stuttgart; Studio Flamisch, Düsseldorf | 3D-Drawings: 3D Sales Technologies GmbH. All people shown are employees at Bürkert. Thank you for your support (and spirit). Solenoid valves

カタログの8ページ目を開く

894346 | Version PDF 01/2019 | Burkert Corporate Communications ■ Burkert Fluid Control Systems Christian-Burkert-StraBe 13-17 74653 Ingelfingen Germany Tel.: +49 (0) 7940/10-0 Fax: +49 (0) 7940/10-91 204 info@burkert.com www.burkert.com

カタログの9ページ目を開く