6240
1 / 11ページ

カタログの抜粋

biirkert FLUID CONTROL SYSTEMS Servo-assisted 2/2 way piston valve DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Cable plug Timer control The 6240 valve is a servo-assisted plunger valve. The stopper and plunger guiding tube are welded together to enhance pressure resistance and leak-tightness. Various seal material combinations are available depending on the application. The housing design and surface quality enable maximum flow rates. The coils are moulded with chemically resistant epoxy. An optional sliding ring bearings increases the life cycle with dry gases. ,Kick and Drop1 electronics are available for over-excitation (plug 2511) and reduced electrical power consumption in operation. In combination with a plug in accordance with DIN EN 17301-803 Form A, the valves satisfy protection class IP65. Stainless steel valves satisfy NEMA 4X. ■ Servo-assisted and compact piston valve with diameter of up to DN12 ■ Vibration-resistant , screwed coil system • Increased leak-tightness with welded plunger guiding tube ■ Safe opening with hard-coupled piston system ■ Explosion proof versions Cable plug Cable plug Technical data

カタログの1ページ目を開く

burkert Technical data, cont. Orifice Response times [ms]: Measured at the outlet with 6 bar inlet pressure at 20 °C Opening: Pressure build-up 0 to 90% Closing: Pressure decrease 100 to 10% Material DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Stopper Shading ring Armature guide tube Core Guide ring Springs Piston consists of: Steel (surface finish thick film passivated) (Brass version) Stainless steel 1.4305 PTFE (Stainless steel version) 1.4113 copper/silver 1.4303 1.4113 PTFE carbon filled 1.4310 ■ Brass/stainless steel 1.4305 ■ Stainless...

カタログの2ページ目を開く

Threaded port

カタログの3ページ目を開く

burkert Ordering chart for valves (other versions on request) 6240 valve with FKM seal material 6240 valve with Viton seal material, UL listed DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Circuit function 6240 valve with Viton seal material, UL recognized Circuit function 6240 valve with Viton seal material, USA version PD19 Circuit function 1) Overpressure to the atmospheric pressure Please note: The cable plug must be ordered separately (see page 3 or the datasheet for Type 2508)

カタログの4ページ目を開く

DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 burkertOrdering chart for valves (other versions on request) High temperature version, all valves with PTFE/PEEK seal, stainless steel body, without cable plug 1) Overpressure to the atmospheric pressure Please note: The cable plug must be ordered separately (see page 3 or the datasheet for Type 2508)

カタログの5ページ目を開く

DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 burkertOrdering chart for valves (other versions on request) High pressure version USA version (only PD19), all valves with PTEF/FKM seal, brass body, without cable plug

カタログの6ページ目を開く

burkert Materials for ATEX/IECEx m DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Dimensions for ATEX/IECEx m [mm] Stopper Shading ring Armature guide tube Core Guide ring Springs Piston consists of Steel (surface finish thick film passivated) (Brass version) Stainless steel. 1.4305 PTFE (Stainless steel version) 1.4113 copper/silver 1.4303 1.4113 PTFE carbon filled 1.4310 • Brass/stainless steel 1.4305 • Stainless steel • PEEK • PTFE carbon filled • FKM/EPDM/PTFE (PTFE for high temps. and PTFE/FKM for high pressure version) Brass/stainless...

カタログの7ページ目を開く

DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Ordering chart for ATEX/IECEx 6240 Ex m T4 with FKM seal and moulded cable (3 m) for single mounting The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 ° C, 100 ° C T5, T6 85 ° C), minus 5 K. ATEX and lECEx approval for coils with fixed cable outlet ATEX: PTB 14 ATEX 2023 X IECEx: IECEx PTB 14.0049 X

カタログの8ページ目を開く

burkert Materials for ATEX/IECEx m junction box version DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 Stopper Shading ring Armature guide tube Core Guideing ring Spring 1.4310 Safety lock: Complete piston includes: Steel (surface finished thick film passivated) (Brass version) Stainless steel 1.4305 PTFE (Stainless steel version) 1.4113 Copper/Silver 1.4303 1.4113 PTFE kohlegefullt PPS - Brass/stainless steel 1.4305 • Stainless steel - PEEK - PTFE oil-filled - FKM/EPDM/PTFE (PTFE for high temperatures and PTFE/FKM for high pressure versions)...

カタログの9ページ目を開く

burkert Ordering chart for ATEX/IECEx junction box version 6240 Ex m T4 with FKM seal and junction box for single mounting DTS 1000332494 EN Version: A Status: RL (released | freigegeben | valide) printed: 17.08.2017 The maximum fluid temperature must not in any case exceed the permissible temperature class (T4 135 ° C, 100 ° C T5, T6 85 ° C), minus 5 K. ATEX and lECEx approval for the assembly of the coil and the junction box ATEX: EPS 16 ATEX 1046 X IECEx: IECEx EPS 16.0021 X Ex-Cable glands (polyamide version included in delivery / surcharge applied for brass nickel plated version Brass....

カタログの10ページ目を開く

burkert j| Further versions on request Materials Seal: EPDM H Voltage Other operating voltages Port Connection NPT, Stainless steel version with G 3/8 connection Approvals Gas transportation DIN EN 3394-1 Ordering chart for accessories Cable plug Type 2508 according to DIN EN 175301-803 Form A The delivery of a cable plug includes the flat seal and the fixing screw. For other versions of cable plugs see data sheet Type 2508 Cable plug Type 2513 acc. to DIN EN 175301-803, Form A Meets the requirements of ATEX category 3 GD To find your nearest Burkert facility, click on the orange box In...

カタログの11ページ目を開く