カタログ >
Bruker Daltonics >
Samplers for GC and GC/MS ? Versatility, Reliability & Productivity

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity
1 / 8ページ

カタログの抜粋

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 1

Chemical Analysis Samplers for GC and GC/MS Versatility, Reliability & Productivity think forward

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 2

Bruker’s automatic liquid samplers are designed to provide the high sample throughput, flexibility and reliability demanded by today’s GC and GC/MS laboratories. Three samplers are available, each tailored to meet a different sample analysis workload. For high throughput needs, the CP-8400 accommodates up to 100 samples using 2 mL vials. For laboratories with less demanding sample load, the CP-8410 can inject up to ten samples using 2 mL vials. For laboratories that require high sample throughput and the ability to conduct pre-injection sample processing, Combi PAL is the ideal choice....

カタログの2ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 3

Versatility for Modern GC Labs Choice of introduction methods Liquid, headspace, SPME, and ITEX injections are possible on all of the autosamplers. Pre-defined liquid injection modes are available: split/splitless, on-column, volatile, neat, and viscous. These pre-defined modes contain the optimized parameters for specific samples. Alternatively, you can define custom injection parameters. A wide range of syringes is compatible with the samplers, fully controlled by the Bruker 450-GC. They range from the SPME syringe for pre-concentration of selective groups of components to large volume...

カタログの3ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 4

Reliability & Optimum Reproducibility Sample integrity sample trays and syringe needles are positioned away from all heated surfaces. This arrangement prevents volatile solvent evaporation and degradation of thermally sensitive samples. Optional sample cooling and heating can be added to further enhance performance. Complete and automated SPME SPME is a solvent-free sample preparation technique where analytes are extracted onto a liquid phase coated on fused silica fiber. The coated fiber is inserted into a GC injector for thermal desorption and analysis. With automated SPME every step from...

カタログの4ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 5

semivolatile compounds in aqueous SPME applications include: ■ Volatile organics, pesticides, phenols, PNAs, and explosives in environmental ■ Flavors and contaminants in food ■ Blood alcohol, arson, and drug analysis ■ Organic volatiles in pharmaceuticals ■ Polymers and other industrial Automated SPME delivers more accurate results with greater throughput than manual SPME. Powerful control software series GC/MS systems, either standalone, through Galaxie™ or MS Workstation software. Galaxie software provides easy method optimization and logging of all instrument parameters. ■ Maximizes...

カタログの5ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 6

Large rinse vials Large Volume Injection – To meet the growing demand for improved detection limits, large injection volumes can be performed with the samplers while minimizing sample carryover with the large waste and rinse vials. Furthermore, a waste drain can be added on the CP8400 and CP-8410 for prolonged cycles. Sampler features and specifications CP-8410 Minimum sample volume (micro vial insert) (µL) Sample tray Sampler control Galaxie software or MS-Workstation Four deep well, six standard microplates or stand alone via Cycle Composer software or control terminal Wash stations Waste...

カタログの6ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 7

Sampler features and specifications (continued) CP-8410 and CP-8400 Plunger pause time (s) Hot needle time (s) Injection speed Dual/duplicate injection offset (min) Yes, with Cycle Composer software Dual or duplicate injections Yes, with Cycle Composer software Large volume injection Large wash vials Flow cell injections Advanced. Requires Combi PAL Incubator oven with six vial positions. Temperature: (Ambient+5) - 200 °C. Time: 0 - 999 min in 1 s increments. Barcode reader Width x height x depth (cm) Power requirements Bruker 450-GC or 430-GC Operating temperature (ºC) Operating humidity...

カタログの7ページ目を開く

Samplers for GC and GC/MS ? Versatility, Reliability & Productivity - 8

Chemical Analysis Solutions GC quadrupole mass spectrometers The Bruker 300-MS series GC/MS systems stand at the pinnacle of versatility for quadrupole mass spectrometer systems. Both the 300-MS and 320-MS are configurable as either single-quadrupole, or triple-quadrupole systems. The 300-MS delivers the performance you’ve come to expect from an industry leader in quadrupole innovation. It features an 800 Da mass range, superior negative ion sensitivity, and unmatched robustness in its performance class. The 320-MS delivers femtogram sensitivity, 2000 Da mass range, and a wide array of...

カタログの8ページ目を開く