カタログ >
Bruker Alicona >
IF-SensorR25

IF-SensorR25
1 / 2ページ

カタログの抜粋

IF-SensorR25 Robust 3D measurement in production IF-SensorR25 is a solid optical 3D measurement instrument for automated form and roughness measurement in production. The sensor is integrated into a production line and delivers high resolution, repeatable and traceable results when measuring surface characteristics in the μm or sub-μm range. Therefore, the IF-SensorR25 is a platform that enables the use of the same measurement process both in-line and in ameasurement laboratory. Standardized interfaces (e.g. QDAS) support an easy and quick integration into production allowing comparable measurements. In combination with a collaborative 6-axis robot, IF-SensorR25 is used as a collaborative system – “Cobot” – for flexible quality assurance and the measurement of microstructures on large components. Bruker alicona I IF-Se

カタログの1ページ目を開く

GENERAL SPECIFICATIONS ositioning volume OBJECTIVE SPECIFIC FEATURES b ective magni cation ateral measurement area x Measurement point distance Working distance inest lateral topographic resolution Vertical resolution Vertical measurement range Measurement noise Measurement speed 1.7 million measurement points sec. (*) Objectives with longer working distance available upon request. (**) Available from Q2 2021. RESOLUTION AND APPLICATION SPECIFICATIONS b ective magni cation eight step accuracy 1 mm Min. measurable radius Min. measurable wedge angle Max. measurable slope angle ACCURACY...

カタログの2ページ目を開く